Ayepokhi Fluorescent Jellyfish Lamp
Usage method
IMPORTANT
add 2 drops of liquid detergen, the jellyfish must be soaked In the water for 24 hours before putting into the container,
- Remove the plastic stopper on the top of the container check batteries are in correctly
- Fill with water, use only distilled, demineralised or bottled water. (see safety hints) do not fill completely. leave approx 5mm of space at top
- Add 2 droos of liquid detergent.
- Put the soakedjellyfish in the container.
- There are some small bubbles in the jellyfish and container, please discharge the bubbles by one stick.
- Place the stopper back on making sure it fits securely to prevent leaking.switch on and watch themagical water land come to life.
- turn on red
- blue
- green
- Purple
- yellow
- light blue
- White
- Colorful
- discoloration
- shutdown
Remote Control
Warm tip: The remote control RF direction can improve the sensitivity of the remote control when it is aligned with the control button of the jellyfish light.
