GETPRO M2424B 24 Inch Round LED Vanity Mirror Wall Hanging Mirror Installation Guide
Do Not Return Product to the Store. Contact GETPRO® service team with any questions [email protected]
*****IMPORTANT NOTICE*****
We will guarantee all customer benefit. The products we ship out are brand new. Please check carefully before installation, compare all parts with the parts listed in the package contents section. If any part appears missing or damaged, do not install. Contact customer service by E-mail: [email protected] Send us the pictures or video, we promise will response to you with 24 hours. We will decide send you spare parts or deliver a replacement by free.
AFTER CARE INSTRUCTIONS
Clean using a soft dry cloth only when turned off. Never use cleaning agents or abrasive materials. Do not allow moisture to come into contact with lamp.
EXTENTED WARRANTY SERVICE
Please send your Purchasing Order No. to [email protected] to register extended 2 years warranty on hardware components. We pride ourselves with a 100% Customer Satisfaction Guarantee. We are confident in our products and stand behind them 100%. Just reach to us with any questions or concerns and we will be happy to help in less than 24 hours!
WARNING AND SAFETY INSTRUCTIONS
Before assembling your LED Lighted Mirror fixture, please make sure that you carefully read through this instruction sheet, refer back to them during installation to ensure your product is fitted safely and correctly. Keep these instructions for future use.
WARNING Risk of Fire and Electric Shock
- All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
- Switch off the electrical supply at the main circuit board BEFORE installation and maintenance.
- Suitable for indoor use only. This product should be positioned well away from curtains and fabrics. Never cover the mirror.
- Regularly check the cord, the transformer and all other parts for damage. If any part is damaged the product should not be used.
INSTALLATION SAFETY
- Inspect the product immediately upon receipt for the transit damage or missing parts. Handle the product with care and protect against knocks to all sides and edges of the glass.
- Ensure there are no hidden pipes or cables in the wall before drilling.
- Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces in case the drill slips.
CAUTION
The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes.
NOTE: The important safeguards and instructions that appear in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and care, are factors that can’ t be built into any product. These factors must be supplied by the person(s) caring for and operating the fixture. Do not install this fixture in hazardous locations.
TOOLS REQUIED
Step 1
Use the tape measure to survey the high, and draw the horizontal line and the vertical line of the wash-basin.
Step 2
Measure the distance of the holes, and mark the holes’ place
Step 3
Drill and insert the Wall Anchor
Step 4
Align the holes of the accessories with the screws and hang them to complete the installation
Step 5
Hang the mirror with the pendant, measure the position of the holes with the tape measure
Step 6
Use the tape measure the height, and draw the horizontal line and the vertical line of the wash-basin.
Step 7
Drill and insert the Wall Anchor
Step 8
Drive in the screw cross the bottom support.
Step 9
Fix the holes on the back of the mirror with the matching screws and hook them to complete the installation.
Step 10
- We provide plug with mirrors.
- Optional to cut the plug directly and connect toe lectical wiring if using wall switch.
We Delighted That You Chose Our Products
Enjoy Our Product And Have a Nice Day
More Products On
www.getprohome.com
Send Email To
[email protected]
www.getprohome.com
E-mail: [email protected]
Hotline:+ 1 5714125962
