MAPerformance MAP EVOX-PSR Power Steering Reservoir
What’s in the box?
1x MAP Billet power steering tank assembled with all fittings and screen
2x M6 stainless hold-down Allen head flange bolts.
Tools needed
You will need:
- Needle nose pliers
- 5mm allen wrench
- 10mm socket
Step 1
Remove 2 10mm bolts holding factory power steering reservoir to the vehicle
Step 2
Remove upper power steering reservoir hose from the reservoir. If you own a fluid suction pump now would be the time to remove as much of the power steering fluid in the reservoir as possible
Step 3
Move reservoir to the side and remove the lower hose
Step 4
Attach lower hose to MAP evox power steering reservoir
Step 5
Attach upper hose to MAP evox power steering reservoir
Step 6
Attach MAP evox PSR to the factory reservoir mounting bracket using uncluded 5mm allen head bolts
Step 7
Fill PSR to the halfway point in the sightglass. It is important after install that you start the car, move the wheel side to side a few times and recheck the level to ensure the system is full
We hope you enjoy your purchase! Reach out to us with any issues or concerns.
1-888-627-3736
@maperformance
[email protected]
www.facebook.com/modernautomotiveperformance/
