WXR860WCS Washing Machine
Before the first use
Operation
fold here
Damage from incorrect installation
and connection. Installing and connecting the washing machine incorrectly will cause serious damage to property. See “Installation”.
Damage resulting from failure to re-
move the shipping struts. Failure to remove the shipping struts can result in damage to the washing machine and to adjacent cabinetry or appliances. Remove the shipping struts as described in “Installation and connection”.
Switching on the washing machine Press the button. The welcome screen will light up. The display will now guide you through the initial commissioning, which is divided into 6 steps. For additional information, please refer to the separate operating instructions supplied.
Start/Stop
Touch display and sensor buttons The and Start/Stop sensor buttons and the sensor buttons in the display react to fingertip contact. The touch display can be scratched by pointed or sharp objects, e.g., pens. Only touch the display with your fingers.
a sensor button Takes you back one level in a menu.
b Touch display
c Start/Stop sensor button Touching the Start/Stop sensor button starts the selected program or cancels a program that has already been started. The program can be started as soon as the sensor button is flashing on and off. The sensor button lights up constantly once the program has started.
d Optical interface This is used by the Service department as a transmission point.
e button For switching the washing machine on and off. To save energy, the washing machine will switch off automatically. This occurs 15 minutes after the end of the program/anti-crease phase, or after being switched on if no further selection is made.
Main menu
After switching on the washing machine, the main menu will appear in the display. You can access all the important submenus from the main menu. Touch the sensor button at any time to return to the main menu. Values set previously are not saved.
Programs For selecting wash programs.
Favorites You can save up to 12 of your own customized wash programs.
MobileStart With MobileControl you can operate your washing machine remotely with the Miele app.
Wash Assistant The Washing assistant guides you step by step so that you can select the optimum wash program for your laundry.
Maintenance Maintenance options for the TwinDos system and the Clean machine program are located in the Maintenance menu.
Settings You can alter the washing machine’s electronics to suit changing requirements in the Settings menu.
Operating the touch display
Scrolling You can scroll to the right or the left by swiping your finger across the screen. The orange scroll bar under the pictures shows that there are additional options to choose from.
Options Touch an option in the menu to select it. If there are multiple options, the selected option will be highlighted in orange.
Pull-down menu Touch the top edge of the screen in the middle and drag down with your finger.
fold here
OPERATION
fold here
1. Preparing the laundry
Empty all pockets.
Damage due to foreign ob-
jects. Nails, coins, paper clips, and so on can cause damage to garments and components in the machine. Check the laundry before washing and remove any such foreign objects.
Sort the laundry by color and by care label. Most garments have a textile care label in the collar or side seam.
Pre-treat stains and badly soiled areas.
2. Selecting a program Touch the Programs sensor button.
Programs
11:02
Normal 1:57 h
Wrinkle-free 1:39 h
Sanitize
2:43 h
Delicates 1:04 h
Help
Scroll to the right in the display until the program you want appears.
Touch the sensor button for that program.
Overview
11:02
Normal
1:57 h
Temperature
Warm plus
TwinDos
Whites
Spin speed
Maximum
Extras
not selected
Timer
Save
The display will change to the Overview menu.
There are 3 additional ways of selecting a program. 1. Favorites 2. Wash assistant 3. MobileStart
fold here
fold here
1 Detergent drawer
2 Control panel
3 Drain filter
4 Door
5 TwinDos dispensing
fold here
fold here
fold here
Starting a program
3. Selecting program settings
Selecting a temperature Touch the Temperature sensor button and select the
desired temperature.
Selecting a spin speed Touch the Spin speed sensor button and select the de-
sired spin speed.
Activating TwinDos TwinDos dispensing is automatically activated on all programs in which dispensing is possible.
1. Switch TwinDos on or off Touch the TwinDos sensor button and select Off or On.
2. Select the detergent When using Miele’s 2-phase system you must set the color of the laundry. If using a different type of detergent, this must be selected. Select Colors or Whites.
3. Select the degree of soiling Select Light, Normal, or Heavy and confirm your selec-
tion with the OK sensor button.
Selecting options Touch the Extras sensor button. Select one or more options and confirm your selection
with the OK sensor button.
Stains Touch the Stains sensor button. Select the types of stain in your load from the list and
confirm your selection with the OK sensor button.
Timer You can use the timer to set the finish time or the start time for a wash program.
4. Load the washing machine
Opening the door Take hold of the door and pull it open. Unfold the laundry and load loosely into the drum.
The maximum load for the program selected will appear in the pull-down menu. The percentage of the maximum load size in the drum is shown in 25% increments, along with the amount of detergent to dispense if AutoDos is not being used. Closing the door
Make sure that no items are caught between the door and the seal.
Shut the door gently.
5. Add detergent
There are several options for adding detergent to the washing machine. TwinDos TwinDos dispensing is automatically activated on all programs in which dispensing is possible. See “3. Selecting program settings” for
more information.
Filling with detergent This washing machine requires particularly efficient detergent. Add detergent in accordance with the value in the pull-down dosage display.
Ensure that TwinDos dispensing is deactivated.
Pull out the detergent drawer and add detergent to the compartments.
Chlorine bleach for removing stains or liquid detergent for the
pre-wash Detergent for the main wash,
including Soak if selected Fabric softener, liquid starch, or caps CapDosing If you selected CapDosing when setting the program, detergent will be dispensed via the capsule for this wash program. Using powder detergent The detergent drawer contains an insert for liquid detergent in the compartment. This insert must be removed to use powder detergent. It is not possible to use powder detergent in the compartment.
Using chlorine bleach
Damage due to chlorine bleach.
Textiles may be discolored or their fibers damaged. Only use chlorine bleach on suitable textiles.
Chlorination must be activated in the settings before chlorine bleach is first used.
The Pre-wash option must not be selected. Pour max. 1/4 cup (60 ml) of bleach
into the chamber. The chlorine bleach is added automatically 10 minutes before the end of the main wash.
6. Start the program Touch the flashing Start/Stop sensor but-
ton. The door will lock and the wash program will start. The program status will appear in the display.
Adding laundry during a program sequence Laundry can be added or removed at any time. Touch the Add laundry sensor button. The following appears in the display:
Please wait
The wash program will stop and the door will unlock. The following appears in the display:
Add laundry The door can be opened.
Open the door and add or remove laundry.
Close the door. Touch the Start/Stop sensor button. The wash program will continue.
7. Program end
The door is locked in the Anti-crease phase. Finish/Anti-crease and Unlock with “Start/Stop” alternate on the display. Touch the Start/Stop sensor button. The door will unlock. Tip: The door unlocks automatically at the end of the anti-crease phase.
Take hold of the door and pull it open.
Remove the laundry.
Items left in the drum could discolor other items in the next wash or become discolored themselves. Remove all items from the drum.
Check the folds in the door seal for any foreign objects.
Tip: Leave the door slightly open. If you used a capsule, remove it from the
detergent drawer. Tip: Leave the detergent drawer slightly open.
fold here
Options
Options
You can supplement the wash programs with options.
SingleWash For efficiently washing a very small load (< 2.2 lb/1 kg) in a normal wash program. The wash duration is reduced. Please note the following advice: Important When adding detergent manually, only use liquid detergent and use the proper amount.Use a maximum of 50% of the specified amount of detergent for ½ load. The use of bleach is not possible.
Eco The Economy option helps to save energy. The wash temperature is reduced and the wash duration is increased in return. The wash program continues to provide a deep clean.
SoftSteam In order to reduce creasing, the laundry undergoes a smoothing process at the end of the program. Reducing the maximum load by 50% will give a better result. Please note the load information in the display. Small loads achieve a better result.
without SoftSteam
with SoftSteam
Full load
Half load
Half load
Small load
Small load
Very small load
The garments must be suitable for drying in a tumble dryer and suitable for ironing .
Gentle Drum rotation and wash duration is reduced. Lightly soiled items are washed more gently.
Pre-wash For laundry with large amounts of dirt, e.g., dust and sand. Pre-wash and the use of bleach are not possible. The chlorine bleach is added too early.
Only liquid detergent may be added to the chamber of the detergent drawer. Powder detergent clogs up the chamber and water can escape from the detergent drawer.
Soak For heavily soiled and stained items with protein stains. A duration of between 30 minutes and 6 hours can be selected for the soak process. See “Settings” for more information. The factory default setting is 30 minutes.
ExtraRinse An extra rinse can be activated to achieve a more thorough wash result.
AllergyWash This option should be used where high standards of hygiene are required. Energy consumption is increased to lengthen temperature holding times and water consumption is increased to improve rinsing efficiency. The items must be suitable for drying in a tumble dryer and suitable for ironing . Rinse Hold The laundry is not spun after the final rinse and remains in the rinse water. This helps prevent creasing if the laundry is not going to be removed from the drum immediately after the end of the program.
PREPARING THE LAUNDRY/SELECTING A PROGRAM
ADDING LAUNDRY
fold here
fold here
fold here
WXR 860
en-US
M.-Nr. 11 622 730
Program overview
fold here
Small load (5.5 lb/2.5 kg)
Very small load (2.2 lb/1 kg)
Small load (4.4 lb/2 kg)
Small load (4.4 lb/2 kg)
Small load (4.4 lb/2 kg)
Small load (4.4 lb/2 kg)
Full load (17.6 lb/8 kg)
Full load (11 lb/5 kg)
Small load (4.4 lb/2 kg)
Half load (7.7 lb/3.5 kg)
Full load (11 lb/5 kg)
Small load (6.6 lb/3 kg)
Half load (8.8 lb/4 kg)
Full load (17.6 lb/8 kg)
Full load (17.6 lb/8 kg)
Load
Medium, Slow, No Spin
Warm plus, Warm, Cold
Silks and other hand-washable fabrics with no wool content. Place tights, bras, etc., in a laundry bag.
High, Medium, Slow, No Spin
Slow, No Spin
Hot plus, Hot, Warm plus, Warm, Cold High, Medium, Slow, No Spin
Hot plus, Hot, Warm plus, Warm, Cold Medium, Slow, No Spin
Hot plus, Hot, Warm plus, Warm, Cold Medium, Slow, No Spin
Maximum, High
Warm, Cold
Warm, Cold
Pre-treat collars and cuffs depending on the level of soiling.
For white textiles made of cotton or linen without special hygiene requirements.
Hot plus, Hot, Warm plus, Warm, Cold Maximum, High, Medium, Slow, No Spin
High, Medium, Slow, No Spin
High, Medium, Slow, No Spin
Hot plus
Wool or wool-blend fabrics.
Outdoor
Silks
Woolens
Wash inside out.
Textiles made from denim.
For linen or cotton towels used for personal hygiene.
For delicate fabrics which are only suitable for hand washing.
Warm plus, Warm, Cold
Cotton fabrics that have hardly been worn or are only very lightly soiled.
Warm plus, Warm, Cold
For lightly or moderately soiled fabrics which are also suitable for washing in the Cottons program.
Maximum, High, Medium, Slow, No Spin
Hot plus, Hot, Warm plus, Warm, Cold Medium, Slow, No Spin
Hot plus, Hot, Warm plus, Warm, Cold High, Medium, Slow, No Spin
Hot plus, Warm plus
For delicate fabrics made from synthetic fibers.
Synthetic or mixed-fiber fabrics, or wrinkle-free cotton.
Cotton or linen fabrics with direct skin contact or for which special hygiene requirements apply.
Maximum, High, No Spin
Speed
Sanitize
Cotton, linen, and mixed-fiber fabrics made of both cotton and linen.
Hot plus, Hot, Warm plus, Warm, Cold Maximum, No Spin
Temperature
Denim/Jeans
Dress Shirts
Darks
Extra White
Towels
Handwash
QuickIntenseWash
Express
Delicates
Wrinkle-free
Sanitize
Normal
Program
fold here
Performance outerwear (e.g., jackets and pants) made from membrane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®, etc.
Proofing
Warm plus
High, Medium, Slow, No Spin
Small load (5.5 lb/2.5 kg)
Treating microfiber fabric, ski wear, or table linens/drapes made from mainly synthetic fibers to provide a finish which is resistant to water and dirt.
Sportswear
Hot plus, Hot, Warm plus, Warm, Cold High, Medium, Slow, No Spin
Half load (6.6 lb/3 kg)
Sportswear such as jerseys and leggings, as well as microfiber and fleece garments.
Sneakers
Warm plus, Warm, Cold
Slow, No Spin
Max. 2 pairs of shoes
Sport shoes only (not leather shoes); brush coarse soiling off before washing. Close Velcro fasteners.
Downs
Hot plus, Hot, Warm plus, Warm, Cold High, Medium, Slow, No Spin
Small load (4.4 lb/2 kg)
Jackets, sleeping bags, pillows, and other down-filled items.
Pillows
Hot plus, Hot, Warm plus, Warm, Cold High, Medium, Slow, No Spin
2 pillows 15 3/4″ x 31 1/2″ or 1 pillow 31 1/2″ x 31 1/2″
Washable pillows with synthetic filling.
Table Linens/Drapes
Hot plus, Hot, Warm plus, Warm, Cold High, Medium, Slow, No Spin
Full load (13.2 lb/6 kg)
Table linen and drapes made of cotton and linen.
Curtains
Warm plus, Warm, Cold
Slow, No Spin
Small load (4.4 lb/2 kg)
Curtains made from synthetic fibers which have been specified as machine-washable by the manufacturer.
Baby Clothes
Hot plus, Hot, Warm plus, Warm, Cold Maximum, High, Medium, Slow, No Spin
Full load (13.2 lb/6 kg)
Baby clothes, baby towels, bath gowns, toweling items, bibs made from cotton.
PROGRAM OVERVIEW
fold here
Detergent
fold here
Cleaning and care
Detergents recommended by Miele
Miele UltraPhase 1 and 2
Normal
Sanitize
Wrinkle-free
Delicates
QuickIntenseWash
Express
Extra White
Dress Shirts
Denim/Jeans
Darks
Woolens
Silks
Outdoor
Proofing
Sportswear
Sneakers
Downs
Pillows
Table Linens/Drapes
Curtains
Baby Clothes
Quick Rinse
Miele Capsules
Recommendation No recommendation
Special-purpose detergents (e.g., WoolCare) Fabric care (e.g., fabric softener) Additives (e.g., booster)
Cleaning the detergent drawer Washing at low temperatures and the use of liquid detergent can lead to a build-up of bacteria in the detergent drawer. Clean the entire drawer at regular inter-
vals for hygiene reasons, even if you are using the TwinDos system exclusively.
Pull out the detergent drawer until a resistance is felt.
Press down the release button and, at the same time, pull the drawer completely out of the machine.
Removing and cleaning the insert for liquid detergents An insert for liquid detergents is located in the compartment of the detergent drawer.
Remove the insert. Clean the insert thoroughly with warm water.
Cleaning the siphon inside the compartment Compartment 1 has a siphon for better dispensing of the chlorine bleach.
Remove the release catch.
Remove the siphon and clean under warm running water.
Cleaning the siphon inside the compartment
Remove the siphon from the compartment and clean under warm running water.
Clean all compartments with warm water.
Cleaning the detergent-drawer housing Use a bottle brush to remove detergent residues and limescale from the jets inside the detergent-drawer housing.
Replace the detergent drawer. Tip: Leave the detergent drawer slightly open to allow it to dry. Sanitize info (cleaning the drum) Washing at low temperatures and/or using liquid detergents can cause bacteria and odors to build up in the washing machine. Use the Clean Machine program to clean the washing machine. Note the message in the display: Hygiene info: Select “Mainte-
nance” and run the “Clean Machine” program.
fold here
Frequently asked questions …
fold here
Problem
Possible cause and solution
The display remains dark and the Start/Stop button indicator light does not come on.
There is no power to the machine. Check whether the plug is plugged in. Check whether the fuse has tripped.
The washing machine has switched off automatically to save energy. Switch it back on with the button.
Door will not lock. Con-
tact Service.
The door is not closed properly. The door lock could not engage. Close the door again. Start the program again.
If the fault message appears again, contact Miele Service.
Drainage fault. Clean
drain filter and pump. Check the drain hose.
The drain is blocked or restricted. The drain hose has been fixed too high. Clean the filter and the pump. The maximum drain height is 3′ 3″ (1 m).
Water intake fault. Open
the water supply.
The water intake is blocked or restricted. Check whether the faucet is turned on properly. Check whether the intake hose is kinked. Check whether there is sufficient water pressure.
The filter in the water intake is blocked. Clean the filter.
Waterproof system acti-
vated. Close water supply and contact Service.
The water protection system has reacted. Close the faucet. Contact Miele Service.
Fault F. If restart fails,
contact Service.
There is a fault. Disconnect the washing machine from the power supply.
Unplug the appliance or switch off the breaker. Wait at least 2 minutes before reconnecting the wash-
ing machine to the power supply. Then switch the washing machine on again. Restart the program.
If the fault message appears again, contact Miele Service.
Problem
Possible cause and solution
Check dosage
Excessive foam has built up during washing. Check the amount of detergent dispensed. With automatic detergent dispensing, check the dispens-
ing quantity set. Observe the instructions on the detergent packaging and
the level of soiling on the laundry. If necessary, reduce the dispensing quantity by incre-
ments of 10%.
Hygiene info: Select “Main-
tenance” and run the “Clean Machine” program.
When washing, a wash program using a temperature above 140°F (60°C) has not been run for a long time. In order to prevent bacteria and unpleasant odors build-
ing up in the machine, run the Clean Machine program using Miele clean machine or universal powder detergent.
Intensive flow: Clean the fil-
ter and jet or remove foreign objects from the pump housing.
The pumps are dirty. Clean the pumps as described in “Frequently Asked
Questions Opening the door in the event of a blocked drain outlet and/or power outage”. Start a wash program again after cleaning.
The jet in the top of the door ring is blocked with lint. Remove the lint with your finger. Do not use any sharp or
pointed tools to do this. Start a wash program again after cleaning.
Only a few more wash cy-
cles possible. Please order new detergent for compartment .
If the fault message appears again, contact Miele Service. The washing machine can still be used but with reduced functionality.
The detergent in the cartridge is running low. There are between 4 and 8 wash cycles remaining. Order a new cartridge.
fold here
Quick Start Guide Washing machine
This Quick Start Guide is not a substitute for the operating instructions supplied with the appliance! It is essential to familiarize yourself with the washing machine before using it for the first time. Please read the operating instructions carefully and pay particular attention to the IMPORTANT SAFETY INSTRUCTIONS.
FREQUENTLY ASKED QUESTIONS …
CLEANING AND CARE
fold here
fold here
fold here
fold here
en-US
fold here
M.-Nr. 11 622 730 / 01
