Using the included Type-C charging cable, plug the USB-C
connector into your POWER FLIPTM.
Connect the USB-A connector to a compatible port such as a wall
charger*, car charger, or computer. (*Charger not included)

Step 2: Start Charging

Place your wireless charging device on your POWER FLIPTM.
Look for the LED light to indicate charging has started.
Note: When your device is removed, ensure the LED light turns
off before using the POWER FLIPTM for charging again.

Leave your device case* on to charge! The POWER FLIPTM can
wirelessly charge through cases up to 3mm thickness.

Warning: Device cases that contain metal will prevent wireless
charger from charging properly.

View Fullscreen

POWER FLIPTM
2-in-1 Wireless Charging Pad
Plataforma de carga inalámbrica 2-en-1
QUICK START GUIDE
GUÍA DE INICIO RÁPIDO

SPECIFICATIONS
ESPECIFICACIONES
Compatibility: 5W, 7.5W, 10W,15W Qi Capable Device Compatibilidad: 5W, 7.5W, 10W, 15W Dispositivo Qi Compatible Wireless protocols: Most current Qi protocol (1.2.4) Qi-PPDE Protocolos Inalámbricos: La mayoría de protocolos Qi (1.2.4) Qi-PPDE Charge Distance: 5mm Distancia de Carga: 5mm Input Power: 12V/2A,9V/2A, or 5V/2A Poder de Entrada: 12V/2A,9V/2A, ó 5V/2A Output Power: 15W Max Poder de Salida: 15W Max Fast Charge Adapter Standard: AFC/QC2.0 at 10W, PD/QC3.0 at 15W Estándar de Adaptador de Carga Rápida: AFC/QC2.0 at 10W, PD/QC3.0 a 15W Cable Type: USB-A to USB-C Tipo de Cable: USB-A a USB-C Weight: 241g Peso: 241g

Length/Width: 5.1 x 2.7 x 0.5in Largo/Ancho: 5.1 x 2.7 x 0.5in Over Charge Protection: Will keep low current standby mode once device battery reaches 100% capacity. Protección de sobrecarga: Mantendrá la corriente baja en modo de espera una vez que la carga llegue al 100% de capacidad
Certifications: FCC, Qi
Certificaciones: FCC, Qi

WHAT’S INSIDE
QUÉ HAY DENTRO
1 Wireless Charging Pad/Stand Plataforma de carga inalámbrica
2 3-foot USB to Type-C Charging Cable Cable de carga de 90cm USB a Type-C

CHARGING POSITIONS POSICIONES DE CARGA

1 LED Light Luz LED

3 Built-In Stand Soporte incorporado

2 Type-C Charging Port

Puerto de carga Type-C

1 Lying Flat

3 Upright

STEP 1
PLUG IT IN
Using the included Type-C charging cable, plug the USB-C connector into your PowerFlipTM and connect the USB-A connector to a compatible port (such as a wall charger*, car charger, or computer). *Charger not included Usando el cable de carga Type-C incuido, conecta el conector USB-A a un Puerto compatible (como un cargador de pared, cargador de auto, o computadora) *Cargador no incluido

STEP 2
START CHARGING
Place your wireless charging device on your PowerFlipTM and look for the LED light to indicate charging has started.
Coloca tu dispositivo inalámbrico en tu PowerFlip y busca que la luz LED indique que ha iniciado la carga rápida.
Note: When your device is removed, ensure the LED light turns off before using the PowerFlipTM for charging again.
Nota: Cuando retires tu dispositivo, asegúrate que la luz LED se apague antes de usar el PowerFlip para cargar nuevamente.
Leave your device case* on to charge! The PowerFlipTM can wirelessly charge through cases up to 3mm thickness.

Deja tu funda del dispositivo colocada para cargar! El PowerFlip puede pasar carga inalámbrica a través de fundas hasta 3mm de grosor.
*Warning: Device cases that contain metal will prevent wireless charger from charging properly.
*Advertencia: Fundas que contengan metal evitarán que el cargador inalámbrico cargue adecuadamente.

ONE YEAR LIMITED WARRANTY Garantía limitada de un año, visite visit quikcell.com/warranty
© 2022 All rights reserved. Alphacomm and Quikcell are registered trademarks of Alpha Comm Enterprises, LLC. All other trademarks are the property of their respective owners. Designed by Alpha Comm Enterprises, LLC at Diseñado por Alpha Comm Enterprises, LLC en 1500 Lakes Parkway, Lawrenceville, GA.30043.
PowerFlipTM PWERFLIP-BLK FCC ID: 2AQ93-WP07A01 Alpha Comm Enterprises Inc., LLC 1500 Lakes Parkway Lawrenceville GA 30043. 1-888-951-0909
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.