River Of Goods 20648 Asher 5 Inch 1 Light Gold Pillar Pendant Instruction Manual

20648 Asher 5 Inch 1 Light Gold Pillar Pendant

Product Information:

• The product is a lamp fixture.
• The maximum wattage of the bulb that can be used with the lamp
  is specified on a label near the lamp holder. It is important not
  to exceed the maximum wattage.
• The lamp shade is attached to the lamp holder using a socket
  ring which comes pre-assembled with the product.
• The lamp requires a bulb of type E26 Type A.40W X 1 or E26 CFL
  13W X 1. The bulb is not included in the product package.

Product Usage Instructions:

1. Refer to the wattage caution label located near the lamp holder
   for maximum wattage. Do not exceed the maximum wattage.
2. Before replacing the bulb(s), ensure that the lamp is unplugged
   from the wall receptacle.
3. Use only a soft cloth to clean the lamp. Do not use any
   chemicals or abrasive cleaners.
4. Attach the mounting bracket(C) to the outlet box using two
   mounting screws(E).
5. Pull out the outlet wires and housing grounding wire from the
   outlet box. Make wire connections using the wire nuts (B):
   –WHITE wire with WHITE-NEUTRAL
   –BLACK wire with BLACK-LIVE
   –Attach the fixture grounding wire to mounting bracket with green
   grounding screw(A). Carefully tuck the wires back into the outlet
   box.
6. Secure the canopy to the metal mounting bracket (C) with screws
   provided (D).
7. Attach the lamp shade to the lamp holder(F), then secure it
   with socket ring(G). Note that socket ring comes pre-assembled and
   is located on the socket.
8. Insert a bulb of type E26 Type A.40W X 1 or E26 CFL 13W X 1.
   The bulb is not included in the product package.
9. Plug the lamp into a wall receptacle and turn it on.

ASSEMBLY INSTRUCTION
CAUTION – Refer to the wattage caution label located near the lamp holder for maximum wattage – do not exceed the maximum wattage.
WARNING – Do not attempt to replace the bulb(s) while the lamp is plugged into a wall receptacle CARE INSTRUCTIONS – Use only a soft cloth; do not use any chemicals or abrasive cleaners.
IMPORTANT SAFETY INSTRUCTIONS
1. Attach the mounting bracket(C)to the outlet box by using two mounting screws(E).
2. Pull out the outlet wires and housing grounding wire from the outlet box. Make wire connections using the wire nuts (B): –WHITE wire with WHITE-NEUTRAL –BLACK wire with BLACK-LIVE –Attached the fixture grounding wire to mounting bracket with green grounding screw(A). Carefully tuck the wires back into the outlet box.
3. Secure the canopy to the metal mounting bracket (C) with screws provided (D).
4. Attached the lamp shade to the lamp holder(F), then secure it with socket ring(G). Important Note: Socket ring comes pre-assembled
and is located on the socket.
E26 Type A.40W X 1 (Not included) E26 CFL 13W X 1 (Not included)