River Of Goods 20671 Sydney 8 Inch 1 Bulb Silver Finished Pendant Light Instruction Manual

20671 Sydney 8 Inch 1 Bulb Silver Finished Pendant Light

Product Information

This product is a lamp that requires assembly before use. It
comes with a mounting bracket (C), wire nuts (B), a green grounding
screw (A), screws for the canopy (E), a lamp shade (F), and a
socket ring (G). The lamp requires an E26 Type A bulb with a
maximum wattage of 60W or an E26 CFL bulb with a maximum wattage of
13W. The lamp is made in China.

Product Usage Instructions

1. Refer to the wattage caution label located near the lamp holder
   for maximum wattage. Do not exceed the maximum wattage.
2. Do not attempt to replace the bulb(s) while the lamp is plugged
   into a wall receptacle.
3. Use only a soft cloth to clean the lamp. Do not use any
   chemicals or abrasive cleaners.
4. Attach the mounting bracket (C) to the outlet box by using two
   mounting screws (D).
5. Pull out the outlet wires and housing grounding wire from the
   outlet box. Make wire connections using the wire nuts (B):
   • WHITE wire with WHITE-NEUTRAL
   • BLACK wire with BLACK-LIVE
   • Attach the fixture grounding wire to mounting bracket with
     green grounding screw(A).

   Carefully tuck the wires back into the outlet box.

6. Secure the canopy to the metal mounting bracket (C) with screws
   provided (E).
7. Attach the lamp shade (F) to the lamp holder, then secure it
   with socket ring(G). Important Note: Socket ring comes
   pre-assembled and is located on the socket.
8. Install the bulb H (not included).

ASSEMBLY INSTRUCTION
CAUTION – Refer to the wattage caution label located near the lamp holder for maximum wattage – do not exceed the maximum wattage.
WARNING – Do not attempt to replace the bulb(s) while the lamp is plugged into a wall receptacle CARE INSTRUCTIONS – Use only a soft cloth; do not use any chemicals or abrasive cleaners.
1. Attach the mounting bracket(C)to the outlet box by using two mounting screws(D).
2. Pull out the outlet wires and housing grounding wire from the outlet box. Make wire connections using the wire nuts (B): –WHITE wire with WHITE-NEUTRAL –BLACK wire with BLACK-LIVE –Attached the fixture grounding wire to mounting bracket with green grounding screw(A). Carefully tuck the wires back into the outlet box.
3. Secure the canopy to the metal mounting bracket (C) with screws provided (E).
4. Attached the lamp shade (F) to the lamp holder, then secure it with socket ring(G). Important Note: Socket ring comes pre-assembled and is
located on the socket. 5. Install the bulb H (not included).

IMPORTANT SAFETY INSTRUCTIONS

E26 Type A.60W X 1 (Not included) E26 CFL 13W X 1 (Not included)

MADE IN CHINA