River Of Goods 20699 Raif 7.625 Inch 1-bulb Brushed Gold Pendant Light Instruction Manual

20699 Raif 7.625 Inch 1-Bulb Brushed Gold Pendant Light

Product Information:

The product is a lamp that comes with a mounting bracket,
canopy, lamp shade, socket ring, and wire nuts. The lamp is
designed to be used with an E26 Type A bulb with a maximum wattage
of 60W or an E26 CFL bulb with a maximum wattage of 13W. The
product is made in China.

Product Usage Instructions:

1. Before assembly, refer to the wattage caution label located
   near the lamp holder for maximum wattage. Do not exceed the maximum
   wattage.
2. Do not attempt to replace the bulb(s) while the lamp is plugged
   into a wall receptacle.
3. Use only a soft cloth to clean the lamp. Do not use any
   chemicals or abrasive cleaners.
4. Attach the mounting bracket (C) to the outlet box using two
   mounting screws (D).
5. Pull out the outlet wires and housing grounding wire from the
   outlet box. Make wire connections using the wire nuts (B):
   • Connect the WHITE wire with WHITE-NEUTRAL.
   • Connect the BLACK wire with BLACK-LIVE.
   • Attach the fixture grounding wire to mounting bracket with
     green grounding screw (A).
   • Carefully tuck the wires back into the outlet box.
6. Secure the canopy to the metal mounting bracket (C) with screws
   provided (E).
7. Attach the lamp shade (F) to the lamp holder, then secure it
   with socket ring (G). Note: Socket ring comes pre-assembled and is
   located on the socket.
8. Install the bulb H (not included).

ASSEMBLY INSTRUCTION
CAUTION – Refer to the wattage caution label located near the lamp holder for maximum wattage – do not exceed the maximum wattage.
WARNING – Do not attempt to replace the bulb(s) while the lamp is plugged into a wall receptacle CARE INSTRUCTIONS – Use only a soft cloth; do not use any chemicals or abrasive cleaners.
IMPORTANT SAFETY INSTRUCTIONS
1. Attach the mounting bracket(C)to the outlet box by using two mounting screws(D).
2. Pull out the outlet wires and housing grounding wire from the outlet box. Make wire connections using the wire nuts (B):
–WHITE wire with WHITE-NEUTRAL
–BLACK wire with BLACK-LIVE
–Attached the fixture grounding wire to mounting bracket with green grounding screw(A). Carefully tuck the wires back into the outlet box.
3. Secure the canopy to the metal mounting bracket (C) with screws provided (E).
4. Attached the lamp shade (F) to the lamp holder, then secure it with socket ring(G). Important Note: Socket ring comes pre-assembled and is
located on the socket. 5. Install the bulb H (not included).

E26 Type A.60W X 1 (Not included) E26 CFL 13W X 1 (Not included)

MADE IN CHINA