Ekvip 022178 String Light Instruction Manual

Ekvip 022178 String Light Instruction Manual

EKVIP LOGO

EKVIP 022178 String Light

EKVIP 022178 String Light

STRING LIGHT
OPERATING INSTRUCTIONS
Original instructions

Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation. It is not allowed to modify or alter this documentation in any way and the manual shall be printed and used as it is in relation to the product. For the latest version of operating instructions, refer to the Jula website.

SAFETY INSTRUCTIONS

  • Do not connect the product to a power point while the product is still in the pack.
  • Only intended to be used indoors.
  • Check that no light sources are damaged. Defective light sources cannot be replaced.
  • Do not connect two or more string lights together electrically.
  • No parts of the product can be replaced, or repaired. The whole product must be discarded if any part is damaged.
  • Do not use sharp or pointed objects during assembly.
  • Do not subject the power cord or wires to mechanical stress. Do not hang objects on the string light.
  • This is not a toy. Be careful if using the product near children.
  • Disconnect the transformer from the power point when the product is not in use.
  • This product must only be used together with the supplied transformer and must never be connected directly to the mains supply without a transformer.
  • The product is not intended to be used as general lighting.
  • Recycle products that have reached the end of their useful life according to local regulations.

WARNING!
The string of lights may only be used if all seals are fitted correctly.

SYMBOLS

SYMBOLS
EKVIP 022178 String Light-1Read the instructions.
EKVIP 022178 String Light-2Approved as per applicable directives.
EKVIP 022178 String Light-3For indoor use only.
EKVIP 022178 String Light-4Class II.
EKVIP 022178 String Light-5Recycle discarded product in accordance with local regulations.

TECHNICAL DATA

  • Rated input voltage 230 V ~ 50 Hz
  • Rated output voltage 3.5V AC
  • Output 2.1 W
  • No. of LEDs 20 pcs.
  • Protection rating IP20

USE

LIGHT MODE
There are ten different light modes. Press the switch to select the required mode.

Number of times to pressLight mode
1Combination
2Warm white constant
3Multicolour constant
4LED 1 warm white flashing
5LED 2 multicolour flashing
6Led 1+2 sequential
7LED 1+2 flashing
8LED 1+2 slow toning
9LED 1+2 slow glowing
10Off

TIMER
The timer is activated by pressing the switch for 3 seconds. The timer switches on the string for 6 hours after which it goes off for 18 hours, switches on for 6 hours and then switches off for 18 hours. Press the switch to switch off the timer function.

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals