EKVIP 022895 String Lights
SAFETY INSTRUCTIONS
- Do not connect the product to the mains power supply while the product is still in the pack.
- Designed for indoor and outdoor use.
- Check that no light sources are damaged.
- Do not connect two or more string lights together.
- No part of the product can be replaced or repaired. The whole product must be discarded if any part is damaged.
- Do not use sharp or abrasive objects during assembly.
- Do not expose the cord or conductors to mechanical loads. Do not hang objects on the string of lights.
- This is not a toy. Exercise care if the product is used near children.
- Unplug the transformer from the mains power supply when the product is not in use. This string of lights must only be used together with the supplied transformer and must never be connected directly to the mains supply without a transformer.
- The product is not intended to be as general lighting.
- Recycle products that have reached the end of their useful life according to local regulations.
- The string of lights may only be used if all seals are fitted correctly.
- The bulbs are not replaceable.
WARNING!
The string of lights may only be used if all seals are fitted correctly.
Symbols
 | Read the instructions. |
 | Class II. |
| Approved as per applicable directives. |
 | Recycle a discarded product in accordance with applicable regulations. |
TECHNICAL DATA
| Input voltage, transformer | 230 V ~ 50 Hz |
| Output voltage, transformer | 12.8 V DC |
| Output | 3.84 W |
| No. of LEDs | 300 pcs. |
| Protection rating | IP44 |
| Cord length | 3,5 m |
| Size | L2 m |
USE
- Remove the string of lights from the packaging.
- Connect the set to the transformer.
- Plug the plug into the mains power supply.
