HDP06663NAT Outdoor Table Lamp
Product Information
The Hampton Bay Outdoor Table Lamp is available in three
different models: HDP06661WH, HDP06662BRNAT, and HDP06663NAT. It
comes with a three-year warranty that covers defects in materials
and workmanship. This product is designed for use in wet locations
and requires a three-wire outdoor extension cord with three-prong
grounding plugs and grounding receptacles. The lamp is suitable for
use with extension cords of cord type SEW, SEOW, SEOOW, SOW, SOOW,
STW, STOW, STOOW, SJEW, SJEOW, SJEOOW, SJW, SJOW, SJOOW, SJTW,
SJTOW, or SJTOOW.
Safety Information
Before assembling the lamp, inspect each part for defects that
may have occurred during shipping. Use only with an extension cord
for outdoor use and make sure to inspect the wire insulation for
any cuts, abrasions, or exposed copper that may have occurred
during shipping. Ground fault circuit interrupter (GFCI) protection
is to be provided on the circuit(s) outlet(s) to be used for the
wet location portable luminaire. Receptacles are available having
built-in GFCI protection and are able to be used for this measure
of safety.
Product Usage Instructions
- Before assembling the lamp, inspect each part for defects that
may have occurred during shipping. - Spread all parts out on a clean surface.
- Use only with an extension cord for outdoor use, such as an
extension cord of cord type SEW, SEOW, SEOOW, SOW, SOOW, STW, STOW,
STOOW, SJEW, SJEOW, SJEOOW, SJW, SJOW, SJOOW, SJTW, SJTOW, or
SJTOOW. - Inspect the wire insulation for any cuts, abrasions, or exposed
copper that may have occurred during shipping. If there is a defect
in the wire, do not continue the assembly process. - Assemble the lamp according to the instructions provided in the
package contents section of the user manual. - After assembly, plug the lamp into a three-wire outdoor
extension cord that has three-prong grounding plugs and grounding
receptacles that accept the appliance’s plug. - Make sure to provide ground fault circuit interrupter (GFCI)
protection on the circuit(s) outlet(s) to be used for the wet
location portable luminaire. Receptacles are available having
built-in GFCI protection and are able to be used for this measure
of safety. - If you have any electrical questions about this lamp, consult a
qualified electrician. If you have any nonelectrical questions
about this lamp, please call Hampton Bay Customer Service at
1-855-HD-HAMPTON or visit WWW.HAMPTONBAY.COM.
Item # 1008 380 633 / 1008 380 891 / 1008 380 669 Model # HDP06661WH / HDP06662BRNAT / HDP06663NAT
USE AND CARE GUIDE
OUTDOOR TABLE LAMP
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service
8 a.m. 7 p.m., EST, Monday Friday, 9 a.m. 6 p.m., EST, Saturday
1-855-HD-HAMPTON HAMPTONBAY.COM
THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this table lamp. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!
Table of Contents
Table of Contents…………………………………………………… 2 Safety Information…………………………………………………. 2 Warranty………………………………………………………………… 2
Three (3) Year Warranty…………………………………………………….. 2 What is Covered……………………………………………………………….. 2 What is Not Covered…………………………………………………………. 2 Pre-Assembly………………………………………………………… 3
Planning Assembly……………………………………………………………. 3
Package Contents…………………………………………………………….. 3 Assembly……………………………………………………………. 4,5 Care and Cleaning…………………………………………………. 6 Troubleshooting…………………………………………………….. 6 Service Parts…………………………………………………………. 7
Safety Information
READ AND SAVE THESE INSTRUCTIONS.
This product has been manufactured with the highest standards of safety and quality.
Before assembling your portable luminaire, spread all parts out on a clean surface. Inspect each part for defects that may have occurred during shipping.
Use only three-wire outdoor extension cords that have three-prong grounding plugs and grounding receptacles that accept the appliance’s plug.
Ground fault circuit interrupter (GFCI) protection is to be provided on the circuit(s) outlet(s) to be used for the wet location portable luminaire. Receptacles are available having built-in GFCI protection and are able to be used for this measure of safety.
Use only with an extension cord for outdoor use, such as an extension cord of cord type SEW, SEOW, SEOOW, SOW, SOOW, STW, STOW, STOOW, SJEW, SJEOW, SJEOOW, SJW, SJOW, SJOOW, SJTW, SJTOW, or SJTOOW.
IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not continue the assembly process.
CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS. If you have any nonelectrical questions about this lamp, please call our Customer Service Team at 1-855-HD-HAMPTON or visit WWW.HAMPTONBAY.COM. Please reference your SKU (1008 380 633) or UPC (053392066611), SKU (1008 380 891) or UPC (053392066628), SKU (1008 380 669) or UPC (053392066635).
WARNING: When using outdoor-use portable luminaires, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury.
Warranty
THREE (3) YEAR WARRANTY
WHAT IS COVERED
The manufacturer warrants this fixture to be free from defects in materials and workmanship for a period of three (3) years from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alteration, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear.
WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit WWW.HAMPTONBAY.COM.
2
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly. To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard.
IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt assembling. Please call the Customer Service Team at 1-855-HD-HAMPTON.
NOTE: You can use one 120V, 60Hz, 60-Watt Max. medium base (E26) type “A” bulb (sold separately). Do not exceed the recommended wattage.
PACKAGE CONTENTS
A B
C
D E
F G
Part Description
Quantity
A
Shade
1
B Harp (Pre-assembled on the shade (A))
1
C
Glass dome
1
D
Socket (Pre-assembled on the lamp body (F))
1
Part Description
E
Switch
F
Lamp body
G
Power cord
Quantity 1 1 1
3
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly
1 Installing the bulb
Screw one 120V 60Hz 60-Watt Max. medium base (E26) type A bulb (sold separately) into the socket (D).
2 Assembling the glass dome
Screw the glass dome (C) into top of the lamp body (F).
C
Bulb (sold separately)
F D
4
Assembly (continued)
3 Assembling the shade
Place the harp (B) over the glass dome (C).
4 Lighting the lamp
Plug the power cord (G) into the outlet and push the switch (E) to turn on the lamp.
NOTE: Remove the plastic cover before using this shade (A).
A B
E C
G
5
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Care and Cleaning
Use a dry, soft cloth to dust or wipe carefully. Do not clean with abrasive materials, bleach, or solvents.
Troubleshooting
Problem The light will not light.
Possible Cause The bulb is burned out. The power is off. The cord is not plugged inb The circuit breaker is off.
The fuse blows or a circuit breaker There is an exposed wire. trips when the light is turned on.
Solution
Replace the light bulb.
Ensure that the power supply is turned on.
Ensure the cord is plugged into an outlet.
Ensure that the circuit breaker is set in the “ON” position.
Discontinue use of the lamp. Unplug the unit from the wall. Contact a qualified electrician or call the
Customer Service Team at 1-855-HD-HAMPTON.
6
Service Parts
MODEL: HDP06661WH / HDP06662BRNAT / HDP06663NAT
A C
Part Description
A
Shade
C
Glass dome
Quantity 1 1
7
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service
8 a.m. 7 p.m., EST, Monday Friday, 9 a.m. 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Hampton Bay - The Home Depot
Hampton Bay - The Home Depot
