ASUWBM06 Unit Assy-Ultra Wideband
Product Information
Model Name: ASUWBM06
Product Overview/UWB Module: The ASUWBM06 is a
unit assembly ultra-wideband (UWB) device that mounts on the
vehicle and communicates with the keyfob or supported smartphone
via UWB technology.
Product Installation Location: The ASUWBM06 can
be installed in various locations on the vehicle, such as the
bumper, headlining, or trunk.
Specification:
- Standards: UWB (Ultra Wide Band), CCC Digital
Key Phase3 Specification, IEEE 802.15.4-2015, IEEE 802.15.4z - UWB Ranging Distance: Maximum 10m (Line of
Sight conditions, between Devices) - Power Voltage: 12V
- Dimension: 92.70mm x 49.93mm x 18.15mm
PIN MAP:
| No. | PIN NAME |
|---|---|
| 1 | CAN_L |
| 2 | CAN_H |
| 3 | SUB_ID2 |
| 4 | SUB_ID1 |
| 5 | GND |
| 6 | GND |
| 7 | SUB_ID0 |
| 8 | B+_POWER |
Electrical Characteristic:
| Min | Typ. | Max | Unit |
|---|---|---|---|
| 9 | 12 | 16 | V |
| -40 | – | 95 | °C (Operating Temperature) |
| -40 | – | 95 | °C (Storage Temperature) |
Product Usage Instructions
- Ensure that the ASUWBM06 is installed in the designated
location of the vehicle. - To operate the device, it needs to receive designated CAN
commands. Make sure the device is connected to the vehicle’s CAN
network. - For communication with the keyfob or supported smartphone,
ensure that the UWB technology is enabled on the device. - Follow the vehicle manufacturer’s guidelines for installing the
ASUWBM06 in specific locations such as the bumper, headlining, or
trunk.
Note: For more detailed instructions on installation and
operation, refer to the complete user manual.
USER MANUAL
(Model Name : ASUWBM06)
UNIT ASSY-ULTRA WIDEBAND
Product overview/UWB Module The device mounts on the vehicle and communicates with the keyfob (or supported smartphone) via UWB.
HOW TO OPERATE It is installed in the designated location of the vehicle and operates according to the designated CAN command.
PRODUCT INSTALLATION LOCATION Bumper, Head lining, Trunk etc.
SPECIFICATION
Standards
UWB Ranging Distance Power voltage Dimension(mm)
Dimension
UWB(Ultra Wide Band) – CCC Digital Key Phase3 Specification – IEEE 802.15.4-2015 – IEEE 802.15.4z Max. 10m(LOS/Line of Sight conditions, between Devices) 12 V 92.70 x 49.93 x 18.15
PIN MAP
No.
PIN NAME
1
CAN_L
2
CAN_H
3
SUB_ID2
4
SUB_ID1
5
GND
6
GND
7
SUB_ID0
8
B+_POWER
Electrical Characteristic
Min
Typ.
Max
UNTI
Supply Voltage
9
12
16
V
Operating Temperature -40
–
95
°C
Storage Temperature
-40
–
95
°C
Product Specification
Name of company
AMOSENSE CO.,LTD.
Equipment / Model Name UNIT ASSY-ULTRA WIDEBAND / ASUWBM06
Add Model
ASUWBM07, ASUWBM08
Identification Code
Amo
Year of manufacture
Separate mark
Manufacturer / Country
AMOSENSE CO.,LTD. / KOREA AMO VINA CO.,LTD. / Vietnam
RF Frequency
CH.5: 6.489 6 GHz CH.9: 7.987 2 GHz
Max POWER (E.I.R.P)
CH.5: -42.59 dBm/MHz CH.9: -43.36 dBm/MHz
* Max Power(E.I.R.P) is EU measured power.
FCC warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device should be installed and operated with minimum 20 cm between the radiator and your body.
IC Warning
This device contains licence-exempt transmitter(s)/receiver that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:(1) This device may not cause interference.(2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil contient des emetteurs / recepteurs exempts de licence qui sont conformes aux RSS exempts de licence d’Innovation, Sciences et Developpement economique Canada. Son fonctionnement est soumis aux deux conditions suivantes:(1) Cet appareil ne doit pas provoquer d’interferences.(2) Cet appareil doit accepter toute interference, y compris les interferences qui peuvent provoquer un fonctionnement indesirable de l’appareil.
This equipment should be installed and operated with minimum 20 cm between the radiator and your body. Cet appareil doit etre installe et utilise avec un minimum de 20 cm entre le radiateur et votre corps.
Trade Name : HYUNDAI MOBIS Co., Ltd.
Trade Mark :
