Calla Petite Pendant Light
Product Information
Product Name: Calla Petite Pendant
Components:
- Part A: Backplate
- Part B: Mounting Screws (x4)
- Part C: Wago Clips (x3)
- Part D: Flora Diffuser
- Part E: Tool + Washer
- Part F: G9 LED Bulb
- Part G: Calla Shade
- Part H: Canopy + Stem
Tools Required (not included):
- Standard wire stripper
- Phillips head screwdriver
Caution: Electrical shock risk. Turn off electrical power
at the main fuse box or circuit panel before beginning
installation, servicing the light, or installing accessories. We
recommend working with a qualified electrician familiar with the
type of work you’d like done.
Product Usage Instructions
- Turn off electrical power at the main fuse box or circuit panel
before beginning installation. - Mount the backplate (A) to the junction box using a phillips
head screwdriver to tighten the mounting screws (B). - Gently slide the canopy cover down the stem (H).
- Use the wago clips (C) to connect the fixture’s wires to the
corresponding wires from the junction box in the wall or ceiling.
White is neutral; Black is live; Green/Yellow is ground. If needed,
use a wire stripper to remove 3/8 of the insulation from each wire
before inserting them into the corresponding wago clip. - Mount the canopy base on the stem (H) into the backplate using
a phillips head screwdriver to tighten the mounting screws
(B). - Gently slide the canopy cover back up the stem (H) and rotate
it clockwise to secure firmly in place. - Carefully align the socket with the hole in the shade (G) and
slide the shade up. Use the included tool (E) to thread the washer
and tighten the shade to the stem (H). - Push the included bulb (F) into the socket.
- Thread the diffuser (D) over the bulb.
- Turn the power back on at the main fuse box or circuit
panel.
Calla Petite Pendant
How to Install Your New Light Please check that you received all of the components pictured in this guide. Reach out to us if anything is missing. It’s very rare, but it happens. Don’t forget to turn off the electrical power source.
Tools you will need that aren’t included: standard wire stripper, Phillips head screwdriver.
CAUTION Electrical shock risk. Turn off electrical power at the main fuse box or circuit panel before beginning installation, servicing the light, or installing accessories. We recommend working with a qualified electrician familiar with the type of work you’d like done.
ATTENTION Risque de choc électrique. Coupez l’alimentation électrique au niveau de la boîte à fusibles principale ou du panneau de circuits avant de commencer l’installation, l’entretien de la lumière ou l’installation d’accessoires. Nous vous recommandons de travailler avec un électricien qualifié familier avec le type de travail que vous souhaitez effectuer.
Contents
Part A Backplate
Part B Mounting Screws (x4)
Part C Wago Clips (x3)
Part D Flora Diffuser
Part E Tool + Washer
Part F G9 LED Bulb
Part G Calla Shade
Part H Canopy + Stem
Assembly Guide
1 of 4
incommonwith.com
Calla Petite Pendant
Step 1: Turn off electrical power at the main fuse box or circuit panel before beginning installation.
Step 2: Mount the backplate (A) to the junction box using a phillips head screwdriver to tighten the mounting screws (B).
!
Step 3: Gently slide the canopy cover down the stem (H).
H
A
B
Step 4: Use the wago clips (C) to connect the fixture’s wires to the corresponding wires from the junction box in the wall or ceiling. White is neutral; Black is live; Green/ Yellow is ground. One ground wire will be attached to the backplate (A), the other ground wire should come from the junction box. If needed use a wire stripper to remove 3/8″ of the insulation from each wire before inserting them into the corresponding wago clip.
A
C
Assembly Guide
2 of 4
incommonwith.com
Calla Petite Pendant
Step 5: Mount canopy base on the stem (H) into the backplate using a phillips head screwdriver to tighten mounting screws (B).
Step 6: Gently slide canopy cover back up the stem (H). Rotate the canopy cover clockwise to secure firmly in place.
H H
B
Step 7: Carefully align the socket with the hole in the shade, and slide the shade up. With one person holding the shade (G) in place, use the included tool (E) to thread the washer, tightening the shade to the stem (H).
H
E
Step 8: Push included bulb into socket (F).
G E
F
Assembly Guide
3 of 4
incommonwith.com
Calla Petite Pendant
Step 9: Thread the diffuser over the bulb (D). Turn the power back on at the main fuse box or circuit panel you disabled before installation.
D
Assembly Guide
4 of 4
incommonwith.com
In Common With
