Kv Num Mont-015 Pinch Protection Leather Instruction Manual

MONT-015 Pinch Protection Leather

Product Information

Product Name: Pinch Protection Leather

Product Code: MONT-015

Version: 2023-01

Description: The Pinch Protection Leather is designed to prevent
the sleeve of a shirt, blouse, or jacket from getting caught in the
door hinge. It is mounted over hinges and easily attached to the
cabinet side and door with the help of two decorative pins.

Product Usage Instructions

1. Ensure that you have all the necessary components, including
   the Pinch Protection Leather, two decorative pins, and any
   additional tools required for installation.
2. Locate the hinges on your cabinet door where you want to
   install the Pinch Protection Leather.
3. Position the Pinch Protection Leather over the hinges, making
   sure it covers them completely.
4. Using the two decorative pins, attach the Pinch Protection
   Leather to the cabinet side and door. Insert the pins through the
   designated holes on the Pinch Protection Leather and into the
   corresponding holes on the cabinet side and door.
5. Ensure that the Pinch Protection Leather is securely attached
   and that it provides adequate coverage over the hinges.
6. Repeat the above steps for any additional hinges or doors where
   you want to install the Pinch Protection Leather.

If you have any questions or need assistance with assembly, you
can contact our Montagesupport by calling +46 512 30 10 71 or
emailing [email protected].

SE/EN
MONTERINGSANVISNING
KLÄMSKYDD LÄDER
ASSEMBLY INSTRUCTIONS
PINCH PROTECTION LEATHER
MONT-015
Version 2023-01

Klämskydd Läder/Pinch Protection Leather
Förhindrar ärmen på skjorta, blus eller kavaj att komma i kläm i dörrens gångjärn. Klämskyddet monteras över gångjärn och fästes enkelt i skåpsida och dörr med hjälp av två dekorstift.
Prevents the sleeve of a shirt, blouse or jacket from getting caught in the door hinge. The pinch protection is mounted over hinges and easily attached to the cabinet side and door with the help of two decorative pins.

Montering/Assembly

1.

ca 30mm cc

ca 20mm

2.

Markera hål med en syl i dörren och i skåpsidan. Mark holes with an awl in the door and in the cabinet side.

Spika fast lädret med dekorstiften i dörren och skåpsida. Nail the leather with the decorative pins in the door and cabinet side.

Version 2023-01

Montagesupport/Assembly support +46 512 30 10 71
[email protected]
Vi reserverar oss för eventuella tryckfel och produktförändringar. We reserve the right for possible printing errors and product changes.