Audimute Aiso3200027 Sound Barrier And Absorption Sheet Instruction Manual

AUDIMUTE AISO3200027 Sound Barrier and Absorption Sheet

The Sheets hang from 3 metal grommets at the top. Hang sheets with label facing out.

Items needed: 3 included quick hanging knob and screws with anchors, a tape measure, a level, a hammer, a pencil, and a power drill with a 1/4” drill bit.

• Step 1: Use a tape measure to measure the distance between the grommets.

  

• Step 2: Use a level and draw a level line with a pencil for where the sheet will hang.

  

• Step 3: Mark the locations of the grommet holes with a pencil.

  

• Step 4: Use a power drill and a 1/4″ drill bit to drill holes in the marked locations.

  

• Step 5: Use a hammer and carefully tap the wall anchors into the drilled holes.

  

• Step 6: Screw the knob onto the screw, then insert the knob and screw through the sheet and screw clockwise into the anchor.

  

• Step 6 (Optional): Screw the knob onto the screw, then screw clockwise into the anchor, then remove the knob, hang the sheet, and screw the knob back on.

  
  

• Audimute.com

References

• Sound Absorption & Soundproofing Solutions | Audimute Sound Management Solutions