Geryst Be1037 True Wireless Earbuds User Guide

BE1037
TRUE WIRELESS EARBUDS

Please read this manual carefully before using the product and keep it in a safe place.

What’s in the box?

Product Diagram

1. LED Indicator/ Microphone
2. MFB button
3. Charging Pin
4. Type-C charging port
5. LED Indicator

1. charging

• Remove the protective film from the earbuds when used for the first time.
• Fully charge both earbuds and the charging case before the first-time use.
• To prevent damage, use the provided USB-C cable.
• Fully dry off the earbuds and the USB port before charging.

If the charging case has run out of battery. The charging case will enter a deep-sleep state, it will not light up while charging. Keep charging for 20 mins till the case lights up to activate the charging case.

2. LED Behavior

3. pairing your earbuds

• Both of the earbuds will turn on automatically and start pairing when taking out the earbuds from the charging case.
• Select “BE1037” from the list of devices shown

Each earbud could be used independently
Note:
When the earbuds are powered on, the earbuds will connect with the device they paired on last time automatically.

4. function

Power On		Click and hold R and L for 3 seconds
Power Off		Pause the music first, Click and hold Rand L for 5 seconds

Play/ Pause		Click (RIL)
Next Track		Double-Click (R)
Previous Track		Double-Click (L)
Volume Up/Down	Click and hold the MFB button of the Left earbuds to turn up the volume. Click and hold the MF B  button of the Right earbuds to turn down the volume.

Answer/ hang up		Click(R/L)
Reject		Double Click(R/L)
Voice -Assistant		Triple Click(R/L)

5. Reset and Reconnecting

If the 2 earbuds can’t be paired successfully or you can’t connect the earbuds with your phone, please try to repair it as the steps as below:
Step1: Delete the Bluetooth connection record on your phone.
Step2: Tum on the 2 earbuds at the same time, and click the MFB of the earbuds 5 times quickly till they enter pairing mode.

6. specification