Gazelle G9407-log Mini Anemometer Instruction Manual

G9407-Log Mini Anemometer

P/N:11040110****X G9407-Log Mini Anemometers (Bluetooth
Version) Operating Instruction

The G9407-Log with Bluetooth function is a stable, safe, and
reliable mini digital anemometer. It is widely used in various
industries, including mining, electric, iron and steel,
petrochemical, energy-saving, navigation, fan manufacturing,
exhaust ventilation, and sports. This operating manual includes
relevant safety information and warnings. Please read this manual
carefully and observe all the cautions strictly.

1. Introduction

Before using the product, please read the operation safety rules
carefully.

2. Out of the Box

Open the packing box and take out the meter. Please check
carefully if any items below are missing or damaged.

• Blister ——————————- 1
• Operating manual —————- 1

3. Operation Safety Rules

1. Please check the meter and the accessories before using and
   beware of any damage or abnormal phenomenon. If you find the case
   is damaged or the LCD shows nothing, or you consider that the meter
   could not work properly anymore, please stop using it.
2. Observe the operating instructions while measuring.
3. Do not open the meter at will or change internal wiring to
   avoid damages to the mater.
4. When the LCD displays , replace the battery timely. Remove the
   battery if the meter is not used for a long time.
5. Do not store or use the meter in high temperature, high
   humidity, flammable, combustible, or strong electromagnetic
   environment.
6. Please use soft cloth and neutral detergent to clean the case
   for maintenance. Do not use grinding agent and solvent to avoid
   case corrosion and damaging the meter.
7. This product has passed CE certification.

Warning: Based on the principle of magnetic induction wind speed
measurement, the product may be subject to interference under
strong battery radiation conditions. Please stay from those
conditions as far as possible.

4. Product Exterior

• Wind speed sensor/Temperature Sensor
• Meter case
• LCD display
• Function keys
• G9407-Log

5. Display Interface

The display interface includes:

• Maximum measurement
• Average value
• Data hold
• Low battery
• m/s
• km/h
• ft/min
• Knots
• Mph
• Celsius
• Fahrenheit
• Temperature value
• Wind chill notification
• Wind speed value Beaufort scale
• Bluetooth communication symbol indication

6. Key Functions and Setup

7. Bluetooth APP Specification

1. To connect Bluetooth, you need to install the application (iENV
   APP) on the smartphone.
2. iOS devices can access it in App Store, and Android devices can
   access it in Play Store or visit www.gazelleindustrial to
   download.
3. Compatibility: iOS 8.4 or higher version, Android 4.3 or higher
   version, Bluetooth 4.0 or higher version, Memory 1G or more.
4. Before Bluetooth APP and product are connected, you need to
   open the Bluetooth at the same time, and through the APP search the
   Bluetooth and select the corresponding products to be connected in
   iENV APP when in the working state, long press the power button to
   turn on or off the Bluetooth.
5. Bluetooth icon is flashing, indicating that the product is not
   connected with APP.
6. Bluetooth icon isn’t flashing, indicating that the product is
   connected with APP.
7. Bluetooth working
8. APP Bluetooth searching

Product Usage Instructions

1. Check the meter and accessories before using and beware of any
   damage or abnormal phenomenon. If you find the case is damaged or
   the LCD shows nothing, or you consider that the meter could not
   work properly anymore, please stop using it.
2. Install the iENV APP on your smartphone and connect it with
   Bluetooth function by following the instructions mentioned in
   section 7 of this manual.
3. Turn on the meter by long pressing the power button and start
   measuring.
4. Observe the operating instructions while measuring. Do not open
   the meter at will or change internal wiring to avoid damages to the
   mater.
5. Replace the battery timely when the LCD displays . Remove the
   battery if the meter is not used for a long time.
6. Do not store or use the meter in high temperature, high
   humidity, flammable, combustible, or strong electromagnetic
   environment.
7. Please use soft cloth and neutral detergent to clean the case
   for maintenance. Do not use grinding agent and solvent to avoid
   case corrosion and damaging the meter.

P/N:11040110****X

G9407-Log
Mini Anemometers (Bluetooth Version) Operating Instruction
1. Introduction
G9407-Log with Bluetooth function is a stable, safe, reliable mini digital anemometer, widely used in mining, electric, iron and steel, petrochemical, energy-saving, navigation, fan manufacturing, exhaust ventilation, sporting and many more industries. This operating manual includes relevant safety information and warnings. Please read this manual carefully and observe all the cautions strictly.
Warning: Before using the product, please read the operation safety rules carefully.
2. Out of the Box
Open the packing box and take out the meter. Please check carefully if any items below are missing or damaged.
1. Blister ——————————- 1 2. Operating manual —————- 1
3. Operation Safety Rules
1.Please check the meter and the accessories before using and beware of any damage or abnormal phenomenon. If you find the case is damaged or the LCD shows nothing, or you consider that the meter could not work properly anymore, please stop using it.
2.Observe the operating instructions while measuring. 3.Do not open the meter at will or change internal wiring to avoid damages
to the mater. 4.When the LCD displays ” “, replace the battery timely. Remove the
battery if the meter is not used for a long time. 5.Do not store or use the meter in high temperature, high humidity,
flammable, combustible, or strong electromagnetic environment. 6.Please use soft cloth and neutral detergent to clean the case for
maintenance. Do not use grinding agent and solvent to avoid case corrosion and damaging the meter. 7.This product has passed CE certification Warning: Based on the principle of magnetic induction wind speed measurement, the product may be subject to interference under strong battery radiation condition. Please stay from those conditions as far as possible.
4. Product Exterior
1. Wind speed sensor/Temperature Sensor 2. Meter case 3. LCD display 4. Function keys
G9407-Log

5. Display Interface
Maximum measurement Average value Data hold Low battery m/s km/h ft/min Knots Mph Celsius Fahrenheit Temperature value Wind chill notification Wind speed value Beaufort scale Bluetooth communication symbol indication
6. Key functions and setup
(remark : “short press”means : about 1second continuous press; “long press” means : about 2 second continuous press 1. ON/OFF / Bluetooth communication Short press once to start up , short press again to power off . Bluetooth communication : Under the state of boosting unit , long press to enter Bluetooth communication mode, and then long press again to quit Bluetooth communication mode. 2.UNIT: Unit conversion key Short press this key and the wind speed value cycles m/s, km/h, ft/min, knots, and mph. Long press this key and the temperature unit changes between and . 3.MAX/AVG: Pressing this key can select maximum, average and normal value measurement; select maximum and the meter will always show the maximum reading; select average and the meter will always show the average reading. 4.HOLD/BL HOLD: Short press this key once to hold the measurement; short press this key again to exit data hold and continue normal measurement. BL: Long press this key to turn on backlight; long press this key again to turn off backlight. 5.Automatic shutdown No operation 5 minutes after , then shut down the unit automatically (the default is automatic shutdown mode ) When you want to remove the automatic shutdown function, hold down the “hold” + ” ” key to boot. LCD has a “APO OFF” character prompt, the automatic shutdown function will be removed .

7.Bluetooth APP specification

1. To connect Bluetooth , you need to install the application (iENV APP) on the smartphone
2. iOS device access it in App Store , Android device access it in Play Store or Please login www.gazelleindustrial to download.
Compatibility: ios 8.4 or higher version Android 4.3 or higher version Bluetooth 4.0 or higher version Memory 1G or more

3. Before Bluetooth APP and product are connected , you need to open the Bluetooth at the same time, and through the APP search the Bluetooth, and select the corresponding products to be connected in iENV APP when in the working state, long press the power button to turn on or off the Bluetooth
a. Bluetooth icon is flashing, indicating that the product is not connected with APP
b. Bluetooth icon isn’t flashing, indicating that the product is connected with APP

Bluetooth working

APP Bluetooth searching

APP connected

connected Broadcasting
G9407-Log

connected
G9407-Log
Broadcasting

connected

8.Performance Testing
1.Technical Parameter

Function

Range

Wind Speed Measurement

Standard Reference Reference
Reference Reference

Temperature Measurement

Wind Rating

Resolution

Accuracy

Remark
Ambient temperature: 23±5 Ambient humidity: 80%RH
Sensor operating temperature PUFU Wind rating as reference

2. General Type a. LCD display: 4-bit LCD display. The displayed maximum is 9999. b. Overload indication: When the wind speed is over 45m/s or the
temperature is lower than -10 or higher than 50, “OL” will be displayed. c. Low battery display: Prompt ” “.
d. Sampling rate: 0.5s e. Sensor type: Magnetic induction type wind speed sensor and NTC
negative temperature coefficient sensor. f. When the temperature is lower than 0 and the wind speed is over
5m/s, the meter shows “WINDCHILL”. g. Impact strength: Can withstand the impact of landing from 1 meter’s
height. h. Power requirement: 1.5V batteries (AAA) ×3 I. Product size: 163×55×28mm j. Spec of thread to connect the product with three tripod: m¼” k. Weight: 118g
3. Environment Limitation a. Indoor use b. Maximum height: 2000m c. Pollution level: 2 d. Working temperature and humidity: 0~40
(not greater than 80%RH) 40~50 (not greater than 45%RH) e. Storage temperature and humidity: -20~60 (not greater than 75%RH) 4. General Maintenance Warning: please do not open the meter case to avoid affecting device accuracy or damage to the meter. a. Maintenance and service of the meter should be accomplished by professional personnel or designated maintenance department. b. Clean the case by dry cloth periodically, detergent with abrasive or solvent composition shall not be used.

5. Battery Installation and Replacement a. The meter uses 3 pieces of AAA 1.5V batteries. Please see figure
below for steps of battery installation and replacement. b. Turn the panel down, push the battery cover open in the direction of
the arrow, lift the cover and remove the batteries; install new batteries in accordance of polarity indications. c. Please use batteries of same type instead of improper ones. d. Close the cover tightly after installing new batteries.