Laser Pecker Lx1 Portable Laser Engraving Machine Instruction Manual

Laser Pecker LX1 Portable Laser Engraving Machine

Product Information

Product Name: Laser Pecker LX1

The Laser Pecker LX1 is a laser engraving machine that allows users to engrave on various materials such as wood, leather, and plastic. It comes with a mobile application and a PC software that can be used to control the machine. The product package includes the main frame machine, AC cable/power supply adapter, data line, double light goggles, cut seat and positioning fixture, raise hope/wrench and screws, and a hood.

Product Accessories List

• Main frame machine
• AC cable/power supply adapter
• Data line L5m*l/0.4m * l
• Double light goggles
• Cut seat and positioning fixture
• Raise hope/wrench and screws
• Hood

Product Size:

The primary Gong deployment size is 578mm x 558mm x 196mm and the main engine joint size is 578.94.8 x 196mm. The product is designed to engrave materials within a specific area.

Laser Source Output Power

The laser source output power is not mentioned in the user manual.

Product Usage Instructions

Step 1: Download and Install the Software

Download and install the Laser Pecker mobile application and PC software from the official website or scan the code provided in the user manual.

Step 2: Connect the Laser Pecker LX1

There are two ways to connect the Laser Pecker LX1:

• Bluetooth Connection: Make sure the device is installed and the power supply is connected, turn on the Laser Pecker application and connect the device inside the application.
• USB Linkage: Connect the USB data cable to the PC terminal, open the official Laser Pecker software, and search for the connected device.

Step 3: Set the Module

It is recommended to adjust the position according to the thickness of the processed material when cutting. When not cutting, set the focal length strip, and the focal length of the protective cover material is about 20mm.

Step 4: Engraving Process

1. Place the material on the cut seat and positioning fixture and adjust the focus according to the thickness of the material.
2. Press the laser head lock knob and put the laser head into the laser fixing bracket.
3. Open the Laser Pecker software and select the desired image or design to be engraved.
4. Press the start button in the software and wait for the engraving process to finish.

Step 5: After-Sale Service

If you encounter any problems during the use process, please contact Laser Pecker’s global online technical support services.
The company provides after-sale service support via Microsignal:
Laserpecker002 and Tel: +86 0755-28913864 (weekdays 9:30-19:00).

Warning

Please read and follow all safety guidelines provided in the user manual before using the Laser Pecker LX1. The product contains a laser that can be harmful if not used properly.

after-sale service

This product we support the global online technical support services, if you encounter any problems during the use process, please feel free to contact us, we will reply to you as soon as possible.
Microsignal: Laserpecker002
Tel: + 86 0755-28913864 (weekdays 9:30-19:.）

Download the APP application

Download the PC-side application

• APP warning against the hall matters, to curriculum Tn l«Jw ww.lascrpcckcr. W order for S £ APP & PC under cn

AC cable / power supply adapterData line L5m*l/0.4m * l Scan the code to download Android / ios APP AP

Double light goggles
Download the APP & PC side on the official website

Product accessories list

Standard youji (laser head can be freely selected to match)

• AC cable / power supply adapterData line L5m*l/0.4m * l
• Double light goggles

apolegamy

1. Press the laser head lock knob and put the laser head into the laser fixing bracket.

Know LX1 Understand the main framework

attended mode

bluetooth connection

Make sure the device is installed and the power supply is connected, turn on the Laser Woodpecker application and connect the device inside the application. After the device has been installed and the

USB linkage
Make sure the device is installed and the power supply is connected, turn on the Laser Woodpecker application and connect the device inside the application. After the device has been installed and the power supply is connected, connect the USB data cable to the PC terminal, open the official laser Woodpecker software LaserPecker, and search for the connected device.

Indicator light description

• Shining blue light: the device waits for a bluetooth connection;
• Regular blue light: Bluetooth is connected;
• Water lamp: data transmission;
• Color gradient lamp: in carving

Set the module

• It is recommended to adjust the position according to the thickness of the processed material when cutting
• When non-cutting, set the focal length strip, and the focal length of the protective cover material is about 20mm
• The changing pen of the brush module shall slide the wave wheel and release the changing pen

size of product

Safety Guide for Use

• At the beginning of the Beijing LXL bud, know hang lost, the inspection is not finished: save the light mirror T net no stain.
• Installation six fan: before starting the operation of LX 1, please refer to the use instructions and the fixed host (with the protection war power department I bracket, li xiao, Sanfu and other accessories with fixed xiao or xiangt objects), carbon is not special due to the placement. Only lead to the destruction.
• Please make sure that I show the power supply and the power supply (BAC for 24V5A) to the power supply.
• Before starting the laser, make sure you do. Safety protection measures, such as can be baked by adding protection halo, wearing goggles to prevent laser damage eyes or skin removal, irrelevant items to prevent cause: save light irradiation into unnecessary damage ring, especially to go easy real easy burial items, to prevent fire.
• In the arbitrary light after the beginning of the carved items, I do not move to cut no dense, so as not to cause the equipment because of day I protect =5 to stop jiang, or even because of the spoon carved items were moved to affect the final effect of jiang.
• The main laser has a certain risk, because the xuan, children cocoon can not have winter yue Ru, W / W extension will people oath just: F / two work ” = inferior / cloud: 3
• Before using this product, please examine the toxic and harmful gas in the laser burning process, so as to avoid poisoning accidents.
• If the seeds in the client has different 3 marriage empty, with the use of the fan to blow away the ring placed in the wide acid ventilated place to hold%.
• The use of this product sad engraved goods tendon, to the car at the beginning of the hidden items have full reflection ring diffuse reflection special gas, this kind of items to hold the Jiang Hui safety protection (Jianwen with the sun board tent will be tons of xiao engraved-area swimming black after a long engraved).
• Do not use C1 kit to shoot into pets. Decision, dolphin,, can not suck W. Turn not afraid.

Precautions

Touch the ocean, shao read 1 use safety], and li Yuan all content qing double fan exercises.
This product does not try to have its own west LX 1 or Fei removal.
T bow worker seven times of LX 1, there will be a mysterious light shot, the light of the human bai: farewell is the human body or things (pet) Su Qi spoon, died. The insect: another evening, the rival OiPad such electronic products screen damage is extremely severe. Correct use and maintenance of the product, the safety of the product’to insect. For the production of this product and the specification, please yan W keep the description in this manual.
In the operation and use of Xu 1, be sure to carry less eyepiece.
LX 1 this time used different: save light alas group, can be geegedada for any Mi ji use.

Disclaimer

Thank you for purchasing the LX 1. The content mentioned in this article is related to your safety and legitimate rights and interests and beauty. Before using this product, please read this article to confirm that ■ has the correct set of the product. Seek practical li shou and according to this article and police operation, may be you and the surrounding personnel with injury, Beijing caused LX 1 and other items around damage.
Once using this product, you have made the statement and information, read, recognized and accepted all the terms and contents of this statement. You only learn to treat all the possible consequences of using this product. You agree to use this product for normal purposes and agree to this clause and the relevant regulations, policies and reference formulated by Hiand wen (Hingin). LX 1 for one stone or indirect use of the product caused by damage, injury and ‘Ren He note Jian Yi’ ren unchanged yi. The use of stone is not limited to all the security signs mentioned in this article

Warning
In the generation of DQ is not ready before, be sure to read the content, production zha li shou chun disgrace
This did not use four types of laser (strong laser radiation), the light radiation may cause the following accidents:

1. point around easy dazzle; 2) Marine light, = half, because the younger light is different object may produce other radiation and gas, and gas pseudo city is # 0 gas; 3) laser will be direct irradiation will cause human injury. Therefore, the personnel must keep a distance with the equipment, well idle protective equipment (such as eye flag,
2. protection cover, protection and land elimination equipment, etc.), strict * in the work and unprepared around the pile easy dazzle, easy.
   And always keep the working environment well ventilated.
3. Laser engineering can exist alkali users to carefully consider whether the object material is suitable for laser operation.
4. No working electricity 24M’5A, should be powered by a type of trap power, household learning super without dead electricity without shortage needle operation. In addition, under the power supply (such as the power plug), the power supply can not be inserted, otherwise there will be a very dangerous cyanotic air wind.
5. This product internal ji xuan half changding , Soil group seven., Two fu put not placed in a strong electromagnetic dry dead near the electrical station, because this can be read shading E: electric record dry: J
6. When the fern light source is opened, there will be sea light fan shot out, the user must avoid the porcelain disgrace sign in front of the laser beam.
7. Do not place any irrelevant full antifine reflective factory in the equipment… a’new light reflected into the body or easy traceability.
8. Before using this product, please make sure that the emissions caused by laser irradiation are burned

Warranty clause

To the extent permitted by law, this warranty is exclusive and supersedes all other warranty conditions implied by birth or decree, including for a special purpose, decree, or any other situation; brother, including those not limited to specific use. In addition, for any accident, special, indirect concubine natural loss, the branch and the stack (may originate from the use, use, will not use and product ke zheng).
Consumer jun dry please repair the business, have the obligation to back up all personal important information: respect. Repair and handle concessions, such as replacement parts ring update product rescue parts version, In disappeared, hi xing village wen will not provide the integrity of M backup or related information and set value The person on the left of the product 3 is free from repair, ±?^ 3 I 5 m rotten silicon huge repair limit, then shock my cheese.
Wu’there are more degrees to repair zhe products, the original product remaining repair period of the original ring and 30 days after the replacement of-. Tie, hi Xing village will be given to the two longer repair.
“With non-Chinese big land M driving products, consumption stingy to hi fire;.”’•’ •-• •• . Note specification, safety specification, close, empty V ” must be written
For other factors, some countries and regions sell W products to seek technical repair, and can provide limited warranty for A and A. So is not the mainland pool area elimination?;, Whether or not within the scope of the warranty, electricity first to the original purchase of the authorized road Jin to seek warranty service, will charge Y repair and manual processing fees, if the recipient of the country has additional tariffs, the main spirit stone air personnel sweep: consumption; xuan to hi Xingren dropout city Hong times repair business, will and can sell like abbot processing.
Distribution may be away. The distribution of hi xing village technology products, told to the Chinese mainland area of the ironing, if there is a unique wood three cloud festival, my han beauty’^ -pat Beijing department for M area effective, has nothing to do with this warranty rhyme.
The quality of processing is highly related to the use of name processing, processing material and processing preparation, which is not investigated. Repair the fan with inside.

Copyright description

• honte’ •- ; Nine pieces and hardware belongs to Zhili, are belong to the village Wen Co., LTD. (the following qi buy fire & as all. Seven drink Xing Technology registered Kou Biao.
My hand friend you soap. If with more just% discomfort 2 this hand Ming seek mustard not to the cost of ten days is no. Refer to our web page (h:: ps: / / w <.vw.laserpecker.cn)^. Understand the most mirage hit updates.
For the use of this product, without the written permission of this Gong, the person of this manual is good, ed the purpose = special gas bug

FCC

FCC Warning Statement: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co‐located for operating in conjunction with any other antenna or transmitter.

IC Warning
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This device complies with Canadian ICES-003 and RSS-210 & RSS-247.
Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.

IC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located for operating in conjunction with any other antenna or transmitter.

This product we support global technical support services, if you in the use of any problem, contact us.
Email: [email protected] | Tel: *86 0755-28913864