Aukey 7-port Usb 3.0 Hub User Manual

AUKEY 7-Port USB 3.0 Hub

Package Contents
7-Port USB 3.0 Hub
USB 3.1 Gen 1 A to A Cable
Power Adapter
User Manual
Warranty Card

Specifications

Product Diagram

Getting Started

1. Plug one end of the included USB-A to A cable into the CB-H3’s USB 3.1 Gen 1 input and the other end into your laptop or desktop computer’s USB 3.1 Gen 1 port
2. Connect the hub to a wall outlet with the power adapter and press the power button. The power indicator will light up green
3. Connect USB peripherals (like mouse, keyboard, and flash drives) to the hub

Product Care & Use

• Connect this hub to your host device first before connecting other devices to the hub
• One HDD (hard disk drive) or up to two SSDs (solid-state drives) can be connected to this hub. For two SSDs, connect one first and wait for your computer to recognize it before connecting the other
• When using the USB 3.1 Gen 1 data ports, the power demand of connected devices shouldn’t exceed the total current output of 900mA. These ports are not recommended for charging due to lower output
• USB 3.1 Gen 1 ports may interfere with 2.4GHz wireless devices (like wireless mice and keyboards). Plug your 2.4GHz wireless receiver into a USB 2.0 port on your computer and position the hub away from the receiver
• Keep away from liquids and extreme heat

Warranty & Customer Support
For questions, support, or warranty claims, contact us at the address below that corresponds with your region. Please include your Amazon order number and product model number.

Amazon US orders: [email protected]
Amazon EU orders: [email protected]
Amazon CA orders: [email protected]
Amazon JP orders: [email protected]

Please note, AUKEY can only provide after sales service for products purchased directly from AUKEY. If you have purchased from a different seller, please contact them directly for service or warranty issues.

References

• AUKEY Official - No.1 Power & Charging Solutions | AUKEY Online...