Autoequip Tech Ae-rd-bs05 Motor Millimeter Wave Radar User Manual

AE-RD-BS05 Motor Millimeter Wave Radar

Product Information

The product is a Motor Millimeter Wave Radar with the model
number AE-RD-BS05. It is designed to detect objects around a
vehicle and provide warnings to the driver. The radar module is
connected to the vehicle’s ACC power supply and starts working when
powered on. It has a maximum detection range of 60 meters and a
width of 8 meters. The radar operates within a voltage range of 10V
to 28V.

Product Usage Instructions

  1. Ensure that the vehicle’s ACC power supply is connected to the
    radar module.
  2. Power on the radar module.
  3. Observe the LED display for distance and object location
    information.
  4. If an object is detected, the closest distance number will be
    displayed, and an indication will show whether the object is on the
    left or right side of the vehicle.
  5. Refer to the “Alarm Mode Description” section for detailed
    information on different alarm modes based on detection range and
    object position.
  6. Follow the FCC radiation exposure guidelines by maintaining a
    minimum distance of 40cm between the radiator of the equipment and
    your body during installation and operation.

system diagram

Product Manual
fuse 2A

Radar

M12-8 PIN black male with full thread

M12-8 PIN black female head with full thread

LED wire group 16CM

M12-8 PIN black female head with full thread

M12-8 black male with full thread

Extension

System Components

component

Qty

Radar host Main line group
LED wire group 16CM Display

Bracket accessory package

Extension 1M

optional

Main line group
Product NameMotor Millimeter Wave Radar Model:AE-RD-BS05 FCC ID: 2AGPO-AE-RD-BS05
3.Technical Parameter
Working voltage Rated voltage Working current Operation temperature Maximum detection distance Maximum detection width
* LED display operating voltage range 10V-28V

Radar manual

4. Function Description
4.1 The radar module is connected to the vehicle ACC power supply and starts working after being powered on.
4.2 When the radar module detects an object, on the alarm: -Display the closest distance number; -Indicates that the object is located on the left or right
side of the vehicle
*For details, please refer to “5. Alarm Mode Description”
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.

5. Alarm Mode Description
The maximum detection range of the radar is 60M, and the width is 8M. Based on distance, the warning method is as follows

Left LED

Right LED

Detection range

Object on the left side of the vehicle

Object on the right side of the vehicle

Distance display, displayed when there is no detection – –

conditions TTC< 5 seconds
Blind spot range
TTC 5 seconds Out-of-scope

position Left Right Middle Left Right
Middle
Left Right Middle

display Yes Yes Yes Yes Yes
Yes Yes

7-segment LED light

Left LED Right LED

Lighting Lighting Lighting Not lit Flicker Flicker

Not lit Lighting Flicker

Lighting Lighting Not lit

Lighting Not lit

Lighting

Not lit Not lit

Not lit

Lighting Lighting
Not lit

Not lit Not lit Not lit

Not lit Not lit Not lit

Not lit Not lit

Not lit

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment . This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with minimum distance 40cm
between the radiator& your body.

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals