EC-RF615 Ultra-thin Integrated Module
Product Information:
- The EC-RF615 is a UHF RFID antenna integrated card reading
module manufactured by EC-LINK Automation (Shenzhen) Co. Ltd. - It is an ultra-thin module that comes with a 915Mhz card
reading module and a ceramic antenna. - The module uses a USB connector for power supply and data
transmission. - It is suitable for installation in size-limited
applications. - The product supports EPC C1/Gen2, ISO/IEC 18000-6C agreement
and has an output power of 5~20dBm. - The working voltage ranges from 3.3V to 5.3V, and the maximum
operating current is 328500. - The module can be used for material/workpiece identification on
production assembly lines, automatic identification of tool
configuration, conveying line tray identification in logistics,
material management, fixture/workpiece identification on mobile
platforms, and identification of production materials in machinery
and equipment.
Product Usage Instructions:
- Connect the EC-RF615 module to a USB port using a USB cable to
supply power and transmit data. - Ensure that the USB cable is connected to the correct pins as
per the USB interface definition provided in the manual (Pin 1:
VCC, Pin 2: DATA-, Pin 3: DATA+, Pin 4: GND). - Maintain a minimum distance of 20cm between the device and your
body while operating the module on a mobile device. - Ensure that any changes or modifications to the module are
approved by the party responsible for compliance to avoid voiding
the user’s authority to operate the equipment.
Caution:
- The EC-RF615 module complies with part 15 of the FCC Rules and
should not cause harmful interference. It must also accept any
interference received, including interference that may cause
undesired operation. - Installation and operation of the module must be carried out
with a minimum distance of 20cm between the radiator and the body
to comply with FCC radiation exposure limits set forth for an
uncontrolled environment. - The module is CAN ICES-003(B) / NMB-003(B) compliant.
EC-LINK Automation (Shenzhen) Co. Ltd.
EC-RF615 Ultra-thin integrated module
EC-RF615 is the EC-LINK company launched a UHF RFID antenna integrated card reading module, integrated 915Mhz card reading module and ceramic antenna, the product uses the industry general USB connector, a cable to achieve power supply and data transmission, can be easily installed in size-limited applications.
Application field: widely used in factory automation and logistics automation. Material / workpiece identification on production assembly line and automatic identification of tool configuration; conveying line tray identification in logistics industry, material management, fixture / workpiece identification on mobile platform; identification of production materials in machinery and equipment.
ADD:Room 2206, Block B, Shixia Xintian Century Business Center, Futian District, Shenzhen City http://www.eclinksz.com Tel:0086-755-8368 1813 Fax:0086-755-8323 5833 E-mail:[email protected]
EC-LINK Automation (Shenzhen) Co. Ltd.
Order information
product modelEC-RF615 Product material number74191102000 frequency range860 960 MHz
Specification parameters: center frequency: 915MHZ Working frequency band: 840MHZ-960MHZ Support Agreement: EPC C1/Gen2, ISO/IEC 18000-6C output power: 5~20dBm working voltage: 3.3V-5.3V maximum operating current: <200mA working temperature: -20°C~+60°C Storage temperature: -25°C~+85°C Protection level: IP65 MTBF: >328500
ConditionEN 61709 at+55°C
USB Interface definition
4PIN USB Interface definition
Pin Definition
Description
1
VCC
Power DC5V
2
DATA-
Data line negative
3
DATA+
Data line positive
4
GND
Power ground
ADD:Room 2206, Block B, Shixia Xintian Century Business Center, Futian District, Shenzhen City http://www.eclinksz.com Tel:0086-755-8368 1813 Fax:0086-755-8323 5833 E-mail:[email protected]
EC-LINK Automation (Shenzhen) Co. Ltd.
Package size 86mmX60mmX20mm
caution
This device must be professionally installed This equipment does not allow any antenna to work with the transmitter; the permitted antenna type must be specified external antennas, for example (antenna name:Planar RFID antenna,Model:Ha-VIS RF-ANT-LR20) device is generally for industrial/commercial use. it must be sold to authorized dealers or installers only,cannot be sold via retail to the general public or by mail order. The equipment is an RFID technology RF product, and must be installed by electrical and electronic professionals with a professional certificate
ADD:Room 2206, Block B, Shixia Xintian Century Business Center, Futian District, Shenzhen City http://www.eclinksz.com Tel:0086-755-8368 1813 Fax:0086-755-8323 5833 E-mail:[email protected]
EC-LINK Automation (Shenzhen) Co. Ltd.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
ADD:Room 2206, Block B, Shixia Xintian Century Business Center, Futian District, Shenzhen City http://www.eclinksz.com Tel:0086-755-8368 1813 Fax:0086-755-8323 5833 E-mail:[email protected]
EC-LINK Automation (Shenzhen) Co. Ltd.
RF warning for Mobile device: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
IC Caution.
CAN ICES-003(B) / NMB-003(B)
RSS-Gen Issue 3 December 2010″&”CNR-Gen 3e éditionDécembre 2010:
– English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. – French: Le présentappareilestconforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitationestautorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d’encompromettre le fonctionnement.
ADD:Room 2206, Block B, Shixia Xintian Century Business Center, Futian District, Shenzhen City http://www.eclinksz.com Tel:0086-755-8368 1813 Fax:0086-755-8323 5833 E-mail:[email protected]
欧科华创自动化（深圳）有限公司-欧科华创自动化（深圳）有限公司
