LPP-20725-3 3-Light Dome Globe Chandelier
Product Information
Product Name: LPP-20725-3
Assembly Instructions: Included
Product Usage Instructions
- Make sure you have all the components required for
assembly. - Start by laying out all the parts on a clean and flat
surface. - Refer to the assembly diagram provided in the user manual to
identify each component. - Begin by attaching part A to part B using the screws provided.
Use a screwdriver to securely fasten them together. - Continue assembling the remaining parts in the same manner,
following the numerical order mentioned in the assembly
diagram. - Once all the components are assembled, double-check that all
screws are tightened properly to ensure stability. - If applicable, connect any electrical components according to
the provided wiring instructions. - Inspect the assembled product for any defects or loose parts
before use. - Follow any additional usage instructions provided in the user
manual specific to your LPP-20725-3 model.
If you encounter any difficulties during assembly or have any
questions regarding product usage, please refer to the user manual
or contact our customer support for assistance.
ASSEMBLY INSTRUCTIONS ITEM NO.: LPP-20725-3
BACD Use 60Wx3 Max type B10/T8 BULB (Bulb not included) 1. Carefully unpack and identify all parts referring to illustration for parts identification. 2. Turn the power to the installation point OFF. 3. Unravel the supply power and ground wires and pass them through the center holes of long stem (B), metal ring (C) and fixture loop (D). 4. Unfold the fixture arms in place. 5. Thread the long stem (B) onto the nipple of the socket assembly (A). 6. Carefully place the metal ring (C) through protruding nipple of the long stem (B), securing with fixture loop (D). Hand tighten until snug. 7. Unfold the metal ring (C) in place. 8. Referring to the installation instruction with the product for the wiring and installation. 9. Install proper bulbs (not provided) to the sockets referring to the marking and/or labels on the fixture for maximum wattage. 10. Restore the power to the installation point ON. 11. Assembly is completely. Retain this sheet for future reference.
