ZEN04 800LR Smart Plug
Product Information
The Z-Wave Control Smart Plug ZEN04 800LR is a reliable home
automation device that allows you to control lamps and small
appliances with ease. It features energy monitoring to help you
manage power use, and a NEW 800 series Z-Wave chip for more secure
and faster control. The plug is extra small, which means it doesn’t
block the other outlet, and it supports OTA firmware updates. It is
ETL listed for safety standards and has a maximum load of 15 A
resistive at 120 VAC 60 Hz power.
Features
- Reliable Z-Wave control of lamps and small appliances
- Energy monitoring to help you manage power use
- NEW 800 series Z-Wave chip for more secure and faster
control - Extra small, doesn’t block the other outlet
- Z-Wave Long Range for ultra-reliable no-mesh communication
- Supports OTA firmware updates
- ETL listed for safety standards
Specifications
- Model Number: ZEN04 800LR
- Power: 120 VAC 60 Hz
- Maximum Load: 15 A resistive
Product Usage Instructions
CAUTION: This is an electrical device. Please use caution
when installing and operating the Smart Plug. Remote control of
appliances may result in unintentional or automated activation of
power. Do NOT use this Z-Wave device to control electric heaters or
other appliances which produce the risk of fire, burns, or
electrical shock when unattended.
Installation
- Plug the Smart Plug into any standard grounded 110 V
receptacle. Do NOT connect any devices to the plug at this
point. - Click the Z-Wave button to see if the LED indicator comes on
and off. If the LED indicator doesn’t light up at all, please try a
different receptacle. If it’s still off, please get in touch with
our support team: [email protected]
Adding the Smart Plug to Your Z-Wave Network
- Initiate inclusion (pairing) in the app (or web interface). Not
sure how? Email [email protected] - If you’re using an S2 hub, it will ask you to enter the DSK PIN
or scan the QR code printed on the side of the plug to complete
SmartStart inclusion. - While the hub is looking for new devices, click the Z-Wave
button 3 times as quickly as possible. - The LED indicator will start flashing blue to confirm inclusion
mode and turn green for 1 second once inclusion is completed.
Troubleshooting
If the plug won’t add to your system, try initiating exclusion
in your hub.
Warnings
- This product should be installed indoors upon completion of any
building renovations. - Prior to installation, the device should be stored in a dry,
dust-and-mold-proof place. - Do not install the Smart Plug in a place with direct sun
exposure, high temperature, or humidity. - Keep away from chemicals, water, and dust.
- Ensure the device is never close to any heat source or open
flame to prevent fire. - Ensure the device is connected to an electric power source that
does not exceed the maximum load power. - No part of the device may be replaced or repaired by the
user.
USER MANUAL
Z-WAVETM CONTROL
1. ADD DEVICE to your hub
SMART PLUG ZEN04 800LR
Initiate inclusion (pairing) in the app (or web interface). Not sure how? [email protected] If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the side of the plug to complete SmartStart inclusion.
www.getzooz.com
FEATURES
Y Reliable Z-WaveTM control of lamps and small appliances
Y Energy monitoring to help you manage power use
Y NEW 800 series Z-Wave chip for more secure and faster control
Y Extra small, doesn’t block the other outlet
Y Z-Wave Long Range for ultra reliable no-mesh communication
Y Supports OTA firmware updates Y ETL listed for safety standards
SPECIFICATIONS
Y Model Number: ZEN04 800LR Y Power: 120 VAC 60 Hz Y Maximum Load: 15 A resistive,
150 W LED bulbs, 1000 W incandescent, 1/3 hp motor Y Operating Temperature: 32° 104° F Y Dimensions: 2.6″ x 1.5″ x 1.14″ Y Range: Up to 300 feet line of sight Y Installation and Use: Indoor only
2. ACTIVATE the plug While the hub is looking for new devices, click the Z-WaveTM button 3 times as quickly as possible. The LED indicator will start flashing blue to confirm inclusion mode and turn green for 1 second once inclusion is completed.
QR / PIN CODE
Z-WAVETM BUTTON
SmartStart enabled products can be added into a Z-WaveTM network by scanning the Z-WaveTM QR Code present on the product with a controller providing SmartStart inclusion.
Choose your hub and scan the QR code with your phone’s camera. Then click on the link to access the step-by-step pairing instructions.
Z-Box Hub
CAUTION
This is an electrical device. Please use caution when installing and operating the Smart Plug. Remote control of appliances may result in unintentional or automated activation of power. Do NOT use this Z-WaveTM device to control electric heaters or other appliances which produce the risk of fire, burns, or electrical shock when unattended.
SmartThings
Hubitat
INSTALLATION
Plug the Smart Plug into any standard grounded 110 V receptacle. Do NOT connect any devices to the plug at this point. Click the Z-WaveTM button to see if the LED indicator comes on and off. If the LED indicator doesn’t light up at all, please try a different receptacle. If it’s still off, please get in touch with our support team: [email protected]
Home Assistant
NEED SOME HELP? [email protected] www.support.getzooz.com
BEFORE YOU PLUG ANYTHING IN Do NOT connect resistive loads over 15 A. Do NOT connect appliances or motors over 8 A!
Connecting heavy duty equipment to this Smart Plug will DAMAGE the device and may cause the connected appliance to malfunction. Do NOT plug washers, dryers, refrigerators, or motors over 1/3 hp to this Smart Plug.
WARNING
Y This product should be installed indoors upon completion of any building renovations.
Y Prior to installation, the device should be stored in a dry, dust-and-mold-proof place.
Y Do not install the Smart Plug in a place with direct sun exposure, high temperature, or humidity.
Y Keep away from chemicals, water, and dust.
Y Ensure the device is never close to any heat source or open flame to prevent fire.
Y Ensure the device is connected to an electric power source that does not exceed the maximum load power.
Y No part of the device may be replaced or repaired by the user.
PAGE 1
TROUBLESHOOTING
The plug won’t add to your system? Try this: 1. Initiate EXCLUSION in your hub
and click the Z-WaveTM button 3 times as quickly as possible. Then try adding it again a er it successfully excludes (this works as a reset and can be tried even if the plug was never connected to your hub in the past). 2. Click the Z-WaveTM button quicker when adding it. 3. Bring the plug closer to your hub, it may be out of range. 4. Double-check if the device is powered. 5. Get troubleshooting tips specific to your hub at www.support.getzooz.com
EXCLUSION (REMOVE DEVICE)
1. Bring the plug within direct range of your Z-WaveTM hub.
2. Put the Z-WaveTM hub into exclusion mode (not sure how to do that? [email protected]).
3. Click the Z-WaveTM button 3 times as quickly as possible.
4. Your hub will confirm exclusion and the plug will disappear from your controller’s device list.
PAGE 2
FACTORY RESET
When your network’s primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, make sure the plug is powered, then click the Z-WaveTM button twice and hold it the third time for 10 seconds. The LED indicator will flash red 3 times to confirm a successful reset.
NOTE: All previously recorded activity and custom settings will be erased from the device’s memory.
Choose your hub and scan the QR code with your phone’s camera. Then click on the link to access the step-by-step instructions on how to access advanced settings for the plug on your Z-WaveTM system.
Z-Box Hub
SmartThings
ASSOCIATION The Smart Plug supports Group 1 for Lifeline communication and Group 2 with up to 5 devices for basic on/off control. This device will send a Basic Set command to Group 2 whenever it changes its on/off status. Please note that not all Z-WaveTM systems give users access to direct association settings so if you’re note sure where to find it, please get in touch with our support and we’ll be happy to help.
ADVANCED SETTINGS
Please refer to your hub’s user guide for advanced programming instructions as they are different for every so ware. Not sure where to start? Go to www.support.getzooz.com for detailed instructions how to change the settings on SmartThings, Hubitat, and more. Or just email us: [email protected]
Parameter 1: Decide how the LED indicator behaves depending on the on/off status of the plug. Note that the LED will flash green 3 times anytime a setting is successfully changed. Values: 0 LED indicator is on when the plug is on, LED indicator is off when the plug is off (default); 1 LED indicator is on when the plug is off, LED indicator is off when the plug is on; 2 LED indicator is always off; 3 LED indicator is always on. Size: 1 byte dec
Parameter 2: Use this parameter to set the auto turn-off timer: the time a er which you want the Smart Plug to automatically turn off once it has been turned on. The number entered as value corresponds to the number of minutes. Values: 0 timer disabled (default); 1-65535 (minutes). Size: 4 byte dec
Parameter 3: Use this parameter to set the auto turn-on timer: the time a er which you want the Smart Plug to automatically turn on once it has been turned off. The number entered as value corresponds to the number of minutes. Values: 0 timer disabled (default); 1-65535 (minutes). Size: 4 byte dec
Parameter 4: Choose the recovery state for your Smart Plug if power outage occurs. Values: 0 Smart Plug remembers the status prior to power outage and turns back to it (default); 1 Smart Plug automatically turns OFF once power is restored (it ignores the status prior to power outage); 2 Smart Plug automatically turns ON once power is restored (it ignores the status prior to the power outage). Size: 1 byte dec
Scan the QR code below and click on the link to access all of the advanced settings for this plug:
ALL SETTINGS HERE
PAGE 3
Home Assistant
S2
Hubitat
This product can be included and operated in any Z-WaveTM network with other Z-WaveTM certified devices from other manufacturers and/or other applications. All nonbattery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. This product features the latest Security 2 (S2) framework to remove smart home network hacking risks. This device is equip-ped with a unique authentification code for trusted wireless communication. This is an ETL certified device. ETL, just like UL, is a Nationally Recognized Testing Laboratory. The ETL mark is proof of product compliance to North American safety standards.
Here is the list of command classes
supported by this device:
0x5E-COMMAND_CLASS_ZWAVEPLUS_INFO_V2, 0x25-COMMAND_CLASS_SWITCH_BINARY_V2, 0x70-COMMAND_CLASS_CONFIGURATION_V4, 0x85-COMMAND_CLASS_ASSOCIATION_V3, 0x8E-COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V4, 0x59-COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3, 0x32-COMMAND_CLASS_METER_V5, 0x55-COMMAND_CLASS_TRANSPORT_SERVICE_V2, 0x86-COMMAND_CLASS_VERSION_V2, 0x72-COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2, 0x5A-COMMAND_CLASS_DEVICE_RESET_LOCALLY, 0x87-COMMAND_CLASS_INDICATOR_V3, 0x73-COMMAND_CLASS_POWERLEVEL, 0x9F-COMMAND_CLASS_SECURITY_2, 0x6C-COMMAND_CLASS_SUPERVISION, 0x7A-COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5
WARRANTY
This product is covered under a 1year limited warranty with extended 5-year warranty once it’s registered. To read the full warranty policy, register your product, or file a warranty claim, please go to ww.getzooz.com/warranty
IN NO EVENT SHALL ZOOZ OR ITS SUBSIDIARIES
AND AFFILIATES BE LIABLE FOR ANY INDIRECT,
INCIDENTAL, PUNITIVE, SPECIAL, OR
CONSEQUENTIAL DAMAGES, OR DAMAGES FOR
LOSS OF PROFITS, REVENUE, OR USE INCURRED
BY CUSTOMER OR ANY THIRD PARTY, WHETHER IN
AN ACTION IN CONTRACT, OR OTHERWISE EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DA-MAGES.
ZOOZ’S LIABILITY AND CUSTOMER’S EXCLUSIVE
REMEDY FOR ANY CAUSE OF ACTION ARISING IN
CON-NECTION WITH THIS AGREEMENT OR THE
SALE OR USE OF THE PRODUCTS, WHETHER
BASED ON NEGLIGENCE, STRICT LIABILITY,
BREACH OF WARRANTY, BREACH OF AGREEMENT,
OR EQUITABLE PRINCIPLES, IS EXPRESSLY LIMITED
TO, AT ZOOZ’S OPTION, REPLACEMENT OF, OR
REPAYMENT OF THE PURCHASE PRICE FOR THAT
PORTION OF PRODUCTS WITH RESPECT TO WHICH
DA-MAGES ARE CLAIMED. ALL CLAIMS OF ANY KIND
ARISING IN CONNECTION WITH THIS AGREEMENT
OR THE SALE OR USE OF PRODUCTS SHALL BE
DEEMED WAIVED UNLESS MADE IN WRITING
WITHIN THIRTY (30) DAYS FROM ZOOZ’S DELIVERY,
OR THE DATE FIXED FOR DELIVERY IN THE EVENT
OF NONDELIVERY.
FCC NOTE
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH
MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT. STORE INDOORS WHEN NOT IN
USE. SUITABLE FOR DRY LOCATIONS ONLY. DO NOT
IMMERSE IN WATER. NOT FOR USE WHERE DIRECTLY
EXPOSED TO WATER.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1. This device may not cause harmful interference,
2. This device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used according to
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not
occur in any given installation.
If this equipment causes harmful interference to radio or
television reception, the user may try to correct the
interference by taking one or more of the following
measures:
– Reorient or relocate receiving antenna – Increase the separation between equipment and receiver –
Connect equipment into a separate outlet or circuit from
receiver
– Consult the dealer or an experienced radio/TV technician
for help.
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.This
equipment should be installed and operated with
minimum distance 20cm between the radiator&your body.
All brand names displayed are trademarks of their
respective holders.
© Zooz 2023
PAGE 4
ZOOZ – Smart Home Technology
Home - Zooz Support Center
