Sennheiser Ew-dx Em 2 Two Channel Digital Rackmount Receiver Instructions

Sennheiser Ew-dx Em 2 Two Channel Digital Rackmount Receiver Instructions

sennheiser logo

Evolution Wireless Digital
EW-DX EM 2
EW-DX SK
EW-DX SKM
EW-D Power Supply
(Model: S012DXM1200100)
Specifications & Manufacturer declarations

SPECIFICATIONS

System

Audio link frequency ranges

Q1-9470.2 – 550 MHz
R1-9520 – 607.8 MHz
S1-10606.2 – 693.8 MHz
S2-10614.2 – 693.8 MHz
S4-10630 – 693.8 MHz
U1/5823.2 – 831.8 MHz & 863.2 – 864.8 MHz
V3-4925.2 – 937.3 MHz
V5-7941.7 – 951.8 MHz & 953.05 – 956.05 MHz & 956.65 – 959.65 MHz
X1-61350.2 – 1398.8 MHz
X9-181435.2 – 1524.8 MHz
Y1-31785.2 – 1799.8 MHz
Bluetooth® Low Energy (BLE) frequency range2402 – 2480 MHz
Audio frequency response20 Hz – 20 kHz (-3 dB)
Audio THD≤ -60 dB for 1 kHz  @ -3 dBfs input level
Dynamic range134 dB
System latency1.9 ms
Operating temperature-10 °C – +50 °C (14 °F – 122 °F)
Relative humidity5 – 95 % (non-condensing)

EW-DX EM 2 (Rack Receiver)

Input voltage11 – 13 V ⎓ or PoE IEEE 802.3af Class 0 (CAT5e or higher)
Input current≤ 1 A
Transmit power (radiated)BLE: max. 10 mW EIRP
Audio output power18 dBu max.
Headphone output2x 70 mW @ 32 Ω
EthernetRJ-45 socket, IEEE802.3 100Base-TX (half+full duplex) 10Base-T  (half+full duplex) (CAT5e or higher)
Dimensions212 x 44 x 206 mm
Weightapprox. 1000 g (without antennas and power supply)

EW-DX SKM (Handheld Transmitter)

Input voltage2.0 – 4.35 V
Input current< 300 mA
Power supply2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack
Occupied bandwidth200 kHz
Transmit power (radiated)Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) LD mode: 10  mW ERP BLE: max. 10 mW EIRP
Dimensions (ø x l)50 x 268 mm (incl. MMD 835 microphone module) 40 x 200 mm (without microphone module)
Weight (without batteries)approx. 304 g (incl. MMD 835 microphone module) approx. 195 g (without microphone module)

EW-DX SK (Bodypack Transmitter)

Input voltage2.0 – 4.35 V
Input current< 300 mA
Power supply2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack
Occupied bandwidth200 kHz
Transmit power (radiated)Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) LD mode: 10 mW ERP BLE: max. 10 mW EIRP
Dimensions63.5 x 85 x 20 mm (without antenna)
Weight (without batteries)approx. 115 – 120 g (depending on the socket type and antenna length)

EW-D Power Supply (Model: S012DXM1200100)

Input voltage100 – 240 V ~
Input frequency50 – 60 Hz
Input current350 mArms
Output voltage12 V ⎓
Output current1000 mA
Stand-by power≤ 100 mW @ 230 V ~ ≤ 100 mW @ 115 V ~
Operating temperature-10 °C to +55 °C (14 °F to 131 °F)
Storage temperature-20 °C to +70 °C (-4 °F to 158 °F)
Relative humidity5 to 95 %, non-condensing

LICENSES

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sennheiser electronic GmbH & Co.KG is under license. Other trademarks and trade names are those of their respective owners.

Conditions and restrictions for using frequencies

There may be special conditions and restrictions for using frequencies in your country.
Before putting the product into operation, find the information for your country at the following address: www.sennheiser.com/sifa

Intended use

The product can be used for commercial purposes.
It is considered improper use when the product is used for any application not named in the corresponding instruction manual.
Sennheiser does not accept liability for damage arising from improper use or misuse of this product and its attachments/accessories.
Before putting the products into operation, please observe the respective country-specific regulations!
Sennheiser is not liable for damages resulting from the loss of connection due to flat or overaged (rechargeable) batteries or exceeding the transmission range.

Manufacturer declarations

Warranty
Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on these products.
For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner.
Warranty FOR AUSTRALIA and NEW ZEALAND ONLY:
Sennheiser Australia Pty Ltd provides a warranty of 24 months on these products.
For the current warranty conditions, visit the Sennheiser website:
Australia: https://en-au.sennheiser.com/
New Zealand: https://en-nz.sennheiser.com/
Sennheiser goods come with guarantees that cannot be excluded under Australian and New Zealand Consumer law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is in addition to other rights or remedies under the law. Nothing in this warranty excludes, limits, or modifies any remedy available to be consumer which is granted by law
To make a claim under this contract, raise a case via the Sennheiser website
Australia: https://en-au.sennheiser.com/service-support-contact
New Zealand: https://en-nz.sennheiser.com/service-support-contact
All expenses of claiming the warranty will be borne by the person making the claim.
Sennheiser international warranty is provided by: Sennheiser Australia Pty Ltd (ABN 68 165 388 312) Level 14, Tower A Zenith Building, 821 Pacific Highway, Chatswood NSW 2067, Australia

In compliance with the following requirements

EU:
WEEE Directive (2012/19/EU)SENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon
Battery Directive
(2006/66/EC & 2013/56/EU)
UK:
WEEE Regulations (2013)
Battery Regulations (2015)

Notes on disposal
The symbol of the crossed-out wheeled bin on the product, The symbol of the crossed-out dumpster on the product, the (rechargeable) battery (if applicable), and/or the packaging indicates that these products must not be disposed of with normal household waste, but must be disposed of separately at the end of their service life. For the packaging, follow the regulations in your country for separating waste. Improper disposal of packaging materials can be harmful to your health and the environment.

The separate collection of waste electrical and electronic equipment, (rechargeable) batteries (if applicable), and packaging is intended to promote reuse and recycling and to prevent negative impacts on public health and the environment, for example, due to hazardous substances contained in these products. At the end of their service life, recycle electrical and electronic equipment and (rechargeable) batteries so that their materials can be reused and prevent environmental pollution.
If (rechargeable) batteries can be removed without destroying them, you are obliged to dispose of them separately (see the product’s operating instructions for information on how to remove the batteries safely). Be especially careful when handling (rechargeable) batteries containing lithium, as these pose special hazards, such as the risk of fire and/or health risks if button cells are swallowed. Reduce battery waste as much as possible by using longer-life batteries or rechargeable batteries.
Further information on the recycling of these products can be obtained from your municipal administration, from the municipal collection points, or from your Sennheiser partner. You may also be able to return electrical or electronic equipment to your distributor if they are legally required to do so. By disposing of your batteries properly, you are helping to protect public health and the environment.

UK Declaration of conformity
• RoHS Regulations (2012)
• Radio Equipment Regulations (2017)
Importer: Sennheiser UK Ltd.
Pacific House, Third Avenue, Globe Park, Marlow
Buckinghamshire SL7 1EY, United Kingdom

EU Declaration of conformity
• RoHS Directive (2011/65/EU)
Hereby, Sennheiser electronic GmbH & Co. KG declares that the radio equipment type EW-DX EM 2, EW-DX SK, EW-DX SK 3-PIN, EW-DX SKM-S, EW-DX SKM is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
www.sennheiser.com/download

Statements regarding FCC and ISED This device complies with Part 15 of the FCC Rules and with Innovation, Science and Economic Development Canada (ISED) license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

This Class B digital apparatus complies with the Canadian ICES-003.
Changes or modifications not expressly approved by Sennheiser electronic Corp. could void the user’s authority to operate the equipment.
Contact information:
Sennheiser Electronic Corporation
1 Enterprise Drive, Old Lyme, CT 06371 www.sennheiser.com

Radiofrequency radiation exposure information:
SK / SKM: The radiated output power of the device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized.

RSS-210 Issue 10 Annex G.6
This device operates on a no-interference, no-protection basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio license is required. For further details, consult Innovation, Science and Economic Development Canada’s Client Procedures Circular CPC-2-1-28, Voluntary Licensing of  Licence-Exempt Wireless Microphones in the TV Bands.

COMPLIANCE

EW-DX EM 2 | EW-DX SK | EW-DX SKM
Range Q1-9: 470.200 – 550.000 MHz

EuropeCE SYMBOL
UKUk CA Symbol
USAFC ICONEM contains FCC ID: HSW2832
SKM FCC ID: DMOSKMSEWD
SK FCC ID: DMOSKEWD
CanadaEM contains IC: 4492A-2832
SKM IC: 2099A-SKMSEWD
SK IC: 2099A-SKEWED
SingaporeComplies with
IMDA Standards
DB100582
JapanSENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon1EW-DX SKSENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon3 001-P01041
SENNHEISER EW-DX EM 2 Two Channel Digital Rackmount Receiver - icon4 D 22-0008 202
EW-DX EM SENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon32202-SMK013
EW-DX SKMSENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon3202-SMK012

Range R1-9: 520.000 – 607.800 MHz

EuropeCE SYMBOL
UKUk CA Symbol
USAFC ICONEM contains FCC ID: HSW2832
SKM FCC ID: DMOSKMSEWD
SK FCC ID: DMOSKEWD
CanadaEM contains IC: 4492A-2832
SKM IC: 2099A-SKMSEWD
SK IC: 2099A-SKEWED
AustraliaSENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon2
SingaporeComplies with
IMDA Standards
DB100582
JapanSENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon1EW-DX SKSENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon3 001-P01041
SENNHEISER EW-DX EM 2 Two Channel Digital Rackmount Receiver - icon4 D 22-0008 202
EW-DX EM SENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon32202-SMK013
EW-DX SKMSENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon3202-SMK012

Range S1-10: 606.200 – 693.800 MHz

EuropeCE SYMBOL
UKUk CA Symbol
SingaporeComplies with
IMDA Standards
DB100582
JapanSENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon1EW-DX SKSENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon3 001-P01041
SENNHEISER EW-DX EM 2 Two Channel Digital Rackmount Receiver - icon4 D 22-0008 202
EW-DX EM SENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon32202-SMK013
EW-DX SKMSENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon3202-SMK012

Range S2-10: 614.200 – 693.800 MHz

EuropeCE SYMBOL
UKUk CA Symbol

Range S4-10: 630.000 – 693.800 MHz

EuropeCE SYMBOL
UKCE SYMBOL
New ZealandSENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon2

Range U1/5: 823.200 – 831.800 MHz & 863.200 – 864.800 MHz

EuropeCE SYMBOL
UKUk CA Symbol

Range V5-7: 941.700 – 951.800 MHz & 953.050 – 956.050 MHz & 956.650 – 959.650 MHz

USAFC ICONEM contains FCC ID: HSW2832
SKM FCC ID: DMOSKMSEWD
SK FCC ID: DMOSKEWD

Range X1-6: 1350.200 – 1398.800 MHz

EuropeCE SYMBOL

Range X9-18: 1435.200 – 1524.800 MHz

USAFC ICONEM contains FCC ID: HSW2832
SKM FCC ID: DMOSKMSEWD
SK FCC ID: DMOSKEWD

Range Y1-3: 1785.2 – 1799.8 MHz

EuropeCE SYMBOL
UKUk CA Symbol
AustraliaSENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon2
New ZealandSENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon2

EW-D Power Supply (Model: S012DXM1200100)

EuropeCE SYMBOL
UKUk CA Symbol
USA / CanadaSENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon8
Australia / New ZealandSENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon2
Greater ChinaSENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon7
JapanSENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon5
South KoreaSENNHEISER EW DX EM 2 Two Channel Digital Rackmount Receiver - icon6 HU10452-21141
R-R-TPK-S012DXM1200100

Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany
www.sennheiser.com
Printed in Germany, Publ. 06/22, 587466/A02

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals