Single Rider Golf Electric Scooter
Product Information
The product is a scooter with a front windshield, rear support,
roof, roof bracket, front support, and a golf rack. The product
comes with M8*60 bolts to install the front roof bracket, M6*50
bolts to install the roof, M8*70 bolts to install the rear support,
M8*45 bolts to install the Golf rack, M6*40-hex bolts to install
front support, and M6*40-round head bolts to install the glass. The
product also has a seat, charger, and battery compartment. The
product comes with a faucet tube and handle, which can be installed
using screws. The product comes with a push rod under the seat to
fix the seat and a Golf Stand.
Product Usage Instructions
- Install the front roof bracket using M8*60 bolts.
- Install the roof using M6*50 bolts.
- Install the rear support using M8*70 bolts.
- Install the Golf rack using M8*45 bolts.
- Install the front support using M6*40-hex bolts.
- Install the glass using M6*40-round head bolts.
- Install the seat by pulling the push rod under the seat and
fixing it in place. - Insert the battery into the battery compartment and connect the
battery cable. - Install the faucet tube and handle by grasping the handle and
moving out of the scooter slowly, then installing the screw of the
faucet handle. - Install the Golf Stand by installing two parts as shown in the
figure. - Pay attention to the front and rear of the roof, then install
two parts as shown in the figure and tighten the screws. - Switch to electric mode and turn on the power.
- Drive the scooter.
Operation Instruction
scooter
front windshield
rear support
roof roof bracket
front support
fastening
Golf rack
M8*60 bolts install the front roof bracket
M6*50 bolts install roof
M8*70 bolts install rear support
M8*45 bolts install the Golf rack
M6*40-hex bolts install front support
M6*40-round head bolts install the glass
Fastening Classification Diagram
seat
charger
battery
Insert the faucet tube.
Grasp the faucet handle and move out of the scooter slowly. Install the screw of the faucet handle.
Put the battery into the battery compartment.
Fixed battery. Connect the battery cable.
Pull the push rod under the seat to fix the seat.
Install the Golf Stand.
Install two parts as shown in the figure.
`rear bracket `Golf rack
Install front support. Tighten the screws.
Install glass. Tighten the screws.
Install two parts as shown in the figure.Tighten the screws.
front rear
Pay attention to the front and rear of the roof. Install two parts as shown in the figure. Tighten the screws.
Switch to electric mode. Turn on the power.
Driving.
