AIPS03 Power Supply
Product Information
This product is the Power Supply for the AIPK1 2-wire building
intercom system. It provides various protection features such as
Over-Voltage Protection, Over-Current Protection, Over-Heat
Protection, Short Circuit Protection, and Lightning Protection.
Parameters:
| No. | Name | Parameter |
|---|---|---|
| 1 | Input Volt.Range | AC 100~240V |
| 2 | Input Current | 0.3A Max. |
| 3 | Input Freq.Range | 50/60Hz |
| 4 | No-Load Power Consumption | < 0.5W |
| 5 | Working Efficiency | 85% TYP |
| 6 | Output Voltage | DC 30V 0.6A |
| 7 | Output Current | 0.6A Max. |
| 8 | Over-Current Protection | Yes |
| 9 | Short Circuit Protection | Yes |
| 10 | Over-Heat Protection | Yes |
| 11 | Lightning Protection | Yes |
| 12 | Working Temp | N/A |
| 13 | Environment Storage Temp | N/A |
| 14 | Working & Storage Humidity | 45%~90% |
Product Usage Instructions
Installation:
Step 1: Fix DIN rail (Fasten DIN rail with
screws horizontally on the wall)
Step 2: Align the power supply at the upper
part of DIN rail, rotate and press the lower part to fasten it to
the rail after a popping sound.
Bus Interface Wiring:
AC: L connect to live wire, N connect to neutral wire (Voltage
input please refer to ‘Parameters’)
Bus interface: BUS1 interface, DC30V exclusive power output, can
be connected to the indoor monitor and outdoor station
(non-polarity).
LED Indicator: Red light turns on while it’s
working; flashes while the bus line is over-current or short
circuit.
Complete installation to DIN rail
Caution:
- Keep devices away from strong magnetic fields, high-temp, and
humid environments. - DO NOT drop the device to the ground, as any hard impact can
cause damage. - DO NOT use a wet cloth or chemicals to clean the device.
- DO NOT disassemble the device.
- Avoid disposing of metal parts in ports to avoid electric
shock.
Power Supply User Manual_V1.0 AIPS03
Brief Introduction
This product is the Power Supply for the AIPK1 2-wire building intercom system.
Function
Over-Voltage Protection Over-Current Protection Over-Heat Protection Short Circuit Protection Lightning Protection
Parameters
No.
Name
Parameter
1
Input Volt.Range AC 100~240V
2
Input Current
0.3A Max.
3
Input
Input Freq.Range 50/60Hz
4
No-Load Power
< 0.5W
Consumption
5
Working Efficiency 85% TYP
6
Output
Output Voltage
DC 30V 0.6A
7
Output Current
0.6A Max.
8
Over-Current
Protection
9
Protection Short Circuit
Protection
10
Over-Heat
Protection
11
Lightning
Protection
12
Working Temp
13 Environment Storage Temp
0.8A ~ 1.2A Auto-recovery 100±10 shutdown L-N: 1KV -10~55 -20~70
14
Working & Storage 45%~90%
Humidity
1
2
Dimension Diagram
Dimension(L×W×D): 59×90×49.5 mm
Instruction
LED Indicator AC Interface
Installation
Step 1: Fix DIN rail (Fasten DIN rail with screws horizontally on the wall)
Step 2: Align the power supply at the upper part of DIN rail, rotate and press the lower part to fasten it to the rail after a popping sound.
Bus Interface
Wiring: AC: L connect to live wire, N connect to neutral wire (Voltage input please refer to `Parameters’); Bus interface: BUS1 interface, DC30V exclusive power output, can be connected to the indoor monitor and outdoor station(non-polarity).
LED Indicator: Red light: Turns on while it’s working; flashes while bus line is over-current or short circuit.
Complete installation to DIN rail
Caution
1. Keep devices away from strong magnetic field, high-temp and humid environment. 2. DO NOT drop the device to the ground, as any hard impact can cause damage. 3. DO NOT use wet cloth or chemicals to clean the device. 4. DO NOT disassemble the device. 5. Avoid disposing metal part in ports to avoid electric shock.
3
4
