Perfect FIT Shutters Blind
Product Information: PerfectFIT Shutters
The PerfectFIT Shutters are a window treatment solution that
offers privacy, light control, and aesthetic appeal. These shutters
are designed to be installed on windows using brackets and provide
a seamless and custom fit.
Installing the Brackets
- Start by inserting two brackets into the top of the window and
two at the bottom. - To correctly position the brackets, take a standard-sized debit
or credit card and hold it in the corner of the glass. - Slide each bracket into place, ensuring that it is lined up
with the edge of the card. Repeat this step for each side, both top
and bottom.
Installing the Shutter
- Ensure that the notches in the top and bottom frames of the
shutter align with the brackets. - Push the shutter back against the window until it slots into
place.
Top Tip: If applicable, make sure that the
cutout part on the side frame of the shutter is facing the window
handle.
Installing the brackets
Installation Guide
PerfectFIT Shutters
The brackets slide between the glass and the rubber seal. 2 Brackets are inserted into the top of the window and 2 at the bottom.
To correctly locate the brackets, take a standard sized debit or credit card and hold it in the corner of the glass.
Slide the bracket into place so that it’s lined up with the edge of the card. Do the same on each side, top and bottom.
Installing the Shutter
Installation Guide
PerfectFIT Shutters
Line up the notches in the top and bottom frames of the Shutter with the brackets, and push the Shutter back against the window until it slots into place.
Top Tip
Make sure that the cutout part on the side frame of the Shutter is on the side facing the window handle, if applicable.
