SD-3-XX-SO-15-XX Stenos Downlight
Product Information
The Stenos Downlight is a lighting fixture designed for both
retrofit and new installation. It comes in three models:
SD-3-XX-SO-15-XX, SD-5-XX-SO-15-XX, and SD-12-XX-SO-15-XX. The
product is suitable for wet locations and is airtight per ASTM E283
standards. It requires a Class 2 power unit and is inherently
protected for Canada. The product is manufactured by Luminii and
their contact information is as follows:
Address: 7777 Merrimac Ave, Niles, IL 60714
Phone: 224.333.6033
Email: [email protected]
Website: www.luminii.com
Product Usage Instructions
Retrofit Plate Installation
Place the retrofit plate onto the ceiling at the desired
location.Use the alignment tabs as a guide to ensure proper alignment if
installing multiple retrofit plates.Secure the retrofit plate to the ceiling using the provided
screws.Use a spiral saw or utility knife to trace and cut out the
inside rectangle shape on the ceiling.Remove and discard the retrofit plate after cutting out the
designated section.
Fixture Installation
Run the fixture lead wires through the cutout slot on the
ceiling.Connect the lead wires to the remote power supply according to
the power supply instructions.Ensure proper wiring connections for safe and reliable
operation.
For additional information and power feed layout guide, refer to
pages 3-6 of the user manual.
Stenos Downlight – Installation Instructions
Models SD-3-XX-SO-15-XX, SD-5-XX-SO-15-XX, SD-12-XX-SO-15-XX
PleaseSretaednaolsl inDsotrwucntiloingshptri-oIrntsotainllsattailolantiIonnstarnudctkioeenps for future reference!
1. PRODMUCodT eTlOs SBDE -I3N-SXTXA-LSLEOD-1B5Y-XAXQ, SUDA-L5IF-IXEXD-SO5-.1C5-OXVXE, RSEDD-1C2E-IXLINX-GSOM-1O5U-XNXT ONLY
ELECTPRlIeCaIsAeNre.ad all instructions prior to installation6a.nTdYkPeEepICfo, rINfuHtuErReErNefeTLrYenPcReO! TECTED
2. USE O1.NPRLYODWUCITTTHO BCELIANSSTSAL2LEPDOBYWA QEURALUIFNIEDITELECTRIC7IA.N.FOR CANA6D. CAO,VEVRAEPDOCERILBINAGRMROIEURNTMONULSYT BE SUITABLE
3. 24 VO23..LU2T4SSEVODOLCNTSLYDWCITH CLASS 2 POWER UNIT
FOR
90°
C78..
TYPE IC, INHERENTLY PROTECTED FOR CANADA, VAPOR BARRIER MUST
BE
SUITABLE
FOR
90°
C
4. SUITA4B.LSEUFITOABRLEWFOERTWLEOT LCOCAATTIIOONNS S
8. ACCESS A9B.OACVCEESCS EABILOINVEGCEIRLEINQG UREIQREUIDRED
5. AIRTIGHT PER ASTM E283
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
7777 MF e2rr2im4.a7c5A7ve.7557
REV0.5
Nileisn,[email protected]
Page 1 of 6 05042023
T 22w4.w33w3..l6u0m33inii.com F 224.757.7557
1 / 5
www.luminii.com
12″ Stenos Downlight
Instruction page index:
Retrofit Installation 2 New Install Installation 3-4 Additional Information 5 Power feed Layout Guide 6
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
SStteennoossDDowownlinglhigt h- Itns-taInllsattaiolnlaIntisotrnucItniosntrsuctions
Models SD-3-XX-SO-15-XX, SD-5-XX-SO-15-XX, SD-12-XX-SO-15-XX
MPloedaeslseSrDe-a3d-XXa-lSl Oin-1s5tr-XuXc,tSioDn-5s-pXXr-ioSOr -t1o5-iXnXs,tSaDll-a1t2i-oXnX-aSOnd-15k-eXeXp for future reference!
Please read all instructions prior to installation and keep for future reference!
1.1P.RPORDOUCDTUTCOTBETOINSBTAELLINEDSBTYAALLQEUDALBIFYIEAD EQLEUCATRLIIFCIIEADN. 5. COVE6R.ECDOVCEEREILDINCGEILIMNGOMUONUNTTOONNLYLY
2. USEELOENCLTYRWICITIHACNL.ASS 2 POWER UNIT
6. TYPE I7C.,TIYNPEHICE,RIENNHETRLEYNPTRLYOPTREOCTETCETDED
3.22.4UVOSLETSODNC LY WITH CLASS 2 POWER UNIT 45..3SA.UIR2ITT4IAGBHVLTOEPFLEOTRSRAWDSETCTMLEO2C8A3TIONS
7. FOR C8A. NFOARDCAAN,AVDAAP, VOAPROBRABRARRIREIERRMMUUSSTTBBEESUSITUAIBTALEBFLOER 90° C FOR 990. °ACCCESS ABOVE CEILING REQUIRED
4. SUITABLE FOR WET LOCATIONS
8. ACCESS ABOVE CEILING REQUIRED
7777 Merrimac Ave
777N7ilMees,rrIiLm6a0c7A1v4e
REV0.5 05042023
NTil2es2,4I.L363037.164033 TF22224.43.3735.670.373557 [email protected]
Page 2 of 6 [email protected]
2 / 5
www.luminii.com
Retrofit Plate installation
1 retrofit plate
alignment tab
screw 1.1
retrofit plate 1.2
Note: Retrofit installations are ideal for re-modeling existing ceiling structure.
1.1 Once the desired location is determined, place the retrofit plate onto ceiling. Followed by fastening screws into the plate holes. If aligning multiple retrofit plates to a surface, use the alignment tabs as a guide to help keep things aligned.
1.2 Using a spiral saw (cutout tool) or utility knife trace the inside rectangle shape. Followed by knocking out that section. Then remove and discard the retrofit plate.
CEILING
cutout tool
2
lead wires
2.1
CEILING
2.2 FOFORORARWIRTEWITGLHEOTTCATIONS LOCRAEQTUIOIRENMEONTNS LY
fixture
cutout slot
cutout slot fixture
2.1 Run the fixture lead wires through the cutout slot, to the remote power supply. Reference power supply instruction for additional information.
lead wires cutout slot
2.2 Rotate the fixture spring clips into the top position, to allow fixture to slide through the cutout slot. Followed by carefully releasing spring clips and push the fixture completely into the slot. If necessary make any surface or paint imperfection prior to installation.
Note: For WET locations add a small amount of silicone sealant all along the inside of the recessed flange.
spring clip
2.2
silicone sealant
CEILING
*LUMINII RESERVES THE RIGHTS TO CHAN*LGUMEISNPIIERCEISFEICRAVTEISOTNHE&RIINGHSTTSRUTCOTCIOHANNGWEISTPHEOCUIFTICNATOIOTNIC&EINSTRUCTION WITHOUT NOTICE
REV0.3 02102021
SStteennoossDDowownlinglhigt h- Itns-taInllsattaiolnlaIntisotrnucItniosntrsuctions
Models SD-3-XX-SO-15-XX, SD-5-XX-SO-15-XX, SD-12-XX-SO-15-XX
MPloedaeslseSrDe-a3d-XXa-lSl Oin-1s5tr-XuXc,tSioDn-5s-pXXr-ioSOr -t1o5-iXnXs,tSaDll-a1t2i-oXnX-aSOnd-15k-eXeXp for future reference!
Please read all instructions prior to installation and keep for future reference!
1.1P.RPORDOUCDTUTCOTBETOINSBTAELLINEDSBTYAALLQEUDALBIFYIEAD EQLEUCATRLIIFCIIEADN. 5. COVE6R.ECDOVCEEREILDINCGEILIMNGOMUONUNTTOONNLYLY
2. USEELOENCLTYRWICITIHACNL.ASS 2 POWER UNIT
6. TYPE I7C.,TIYNPEHICE,RIENNHETRLEYNPTRLYOPTREOCTETCETDED
3.22.4UVOSLETSODNC LY WITH CLASS 2 POWER UNIT 45..3SA.UIR2ITT4IAGBHVLTOEPFLEOTRSRAWDSETCTMLEO2C8A3TIONS
7. FOR C8A. NFOARDCAAN,AVDAAP, VOAPROBRABRARRIREIERRMMUUSSTTBBEESUSITUAIBTALEBFLOER 90° C FOR 990. °ACCCESS ABOVE CEILING REQUIRED
4. SUITABLE FOR WET LOCATIONS
8. ACCESS ABOVE CEILING REQUIRED
Plaster Frame Hanger Bar Plate Installation
1
ceiling joist
7777 Merrimac Ave
777N7ilMees,rrIiLm6a0c7A1v4e
REV0.5 05042023
NTil2es2,4I.L363037.164033 TF22224.43.3735.670.373557 [email protected]
Page 3 of 6 [email protected]
3 / 5
www.luminii.com
screw 1.1
plaster plate alignment tab
adjustable 16.0″ – 24.0″
2 SURFACE
2.1 plaster frame plate
adjustable hanging bars
Note: Plaster frame plate installation are ideal for new construction installs.
1.1 Align the plaster plate adjustable arms to the
ceiling joist, followed by fastening a screw to each
1.1
arm. The adjustable arms can be spread apart from
16.0″ to 24.0″. If aligning multiple plaster plates to a
surface, use the alignment tabs as a guide to help keep
things aligned.
ceiling joist
2.1
2.2
Cable hook
cutout tool Note: Prior to surface installation, run all remote power supply wires to the cable hook, located on the back of plaster frame plate. For easy access afterwards.
2.1 Install the 1/2″ – 5/8″ surface to the ceiling joist. 2.2 Using a spiral saw (cutout tool) or utility knife cut around the plaster plate trim. Followed by knocking out that surface section.
*LUMINII RESERVES THE RIGHTS TO CHAN*LGUMEISNPIIERCEISFEICRAVTEISOTNHE&RIINGHSTTSRUTCOTCIOHANNGWEISTPHEOCUIFTICNATOIOTNIC&EINSTRUCTION WITHOUT NOTICE
REV0.3 02102021
SStteennoossDDowownlinglhigt h- Itns-taInllsattaiolnlaIntisotrnucItniosntrsuctions
Models SD-3-XX-SO-15-XX, SD-5-XX-SO-15-XX, SD-12-XX-SO-15-XX
MPloedaeslseSrDe-a3d-XXa-lSl Oin-1s5tr-XuXc,tSioDn-5s-pXXr-ioSOr -t1o5-iXnXs,tSaDll-a1t2i-oXnX-aSOnd-15k-eXeXp for future reference!
Please read all instructions prior to installation and keep for future reference!
1.1P.RPORDOUCDTUTCOTBETOINSBTAELLINEDSBTYAALLQEUDALBIFYIEAD EQLEUCATRLIIFCIIEADN. 5. COVE6R.ECDOVCEEREILDINCGEILIMNGOMUONUNTTOONNLYLY
2. USEELOENCLTYRWICITIHACNL.ASS 2 POWER UNIT
6. TYPE I7C.,TIYNPEHICE,RIENNHETRLEYNPTRLYOPTREOCTETCETDED
3.22.4UVOSLETSODNC LY WITH CLASS 2 POWER UNIT 45..3SA.UIR2ITT4IAGBHVLTOEPFLEOTRSRAWDSETCTMLEO2C8A3TIONS
7. FOR C8A. NFOARDCAAN,AVDAAP, VOAPROBRABRARRIREIERRMMUUSSTTBBEESUSITUAIBTALEBFLOER 90° C FOR 990. °ACCCESS ABOVE CEILING REQUIRED
4. SUITABLE FOR WET LOCATIONS
8. ACCESS ABOVE CEILING REQUIRED
Plaster Frame Hanger Bar Plate Installation
3
7777 Merrimac Ave
777N7ilMees,rrIiLm6a0c7A1v4e
REV0.5 05042023
NTil2es2,4I.L363037.164033 TF22224.43.3735.670.373557 [email protected]
Page 4 of 6 [email protected]
4 / 5
www.luminii.com
lead wires adjustable arm
ceiling joist surface
3.1 spring clip
fixture
plaster plate
fixture
FOR WET LOCATIONS
FOORRAWIRTIEGTHT LOCARTEIQOUNIREMOENNTLSY
drywall 3.2
3.1 Run the fixture lead wires through the cutout slot, to the remote power supply. Reference power supply instruction for additional information.
3.2 Rotate the fixture spring clips into the top position, to allow fixture to slide through the cutout slot. Followed by carefully releasing spring clips and push the fixture completely into the slot. If necessary make any surface or paint imperfection prior to installation.
Note: For WET locations add a small amount of silicone sealant all along the inside of the recessed flange.
silicone sealant
*LUMINII RESERVES THE RIGHTS TO CHAN*LGUMEISNPIIERCEISFEICRAVTEISOTNHE&RIINGHSTTSRUTCOTCIOHANNGWEISTPHEOCUIFTICNATOIOTNIC&EINSTRUCTION WITHOUT NOTICE
REV0.3 02102021
SStteennoossDDowownlinglhigt h- Itns-taInllsattaiolnlaIntisotrnucItniosntrsuctions
Models SD-3-XX-SO-15-XX, SD-5-XX-SO-15-XX, SD-12-XX-SO-15-XX
MPloedaeslseSrDe-a3d-XXa-lSl Oin-1s5tr-XuXc,tSioDn-5s-pXXr-ioSOr -t1o5-iXnXs,tSaDll-a1t2i-oXnX-aSOnd-15k-eXeXp for future reference!
Please read all instructions prior to installation and keep for future reference!
1.1P.RPORDOUCDTUTCOTBETOINSBTAELLINEDSBTYAALLQEUDALBIFYIEAD EQLEUCATRLIIFCIIEADN. 5. COVE6R.ECDOVCEEREILDINCGEILIMNGOMUONUNTTOONNLYLY
2. USEELOENCLTYRWICITIHACNL.ASS 2 POWER UNIT
6. TYPE I7C.,TIYNPEHICE,RIENNHETRLEYNPTRLYOPTREOCTETCETDED
3.22.4UVOSLETSODNC LY WITH CLASS 2 POWER UNIT 45..3SA.UIR2ITT4IAGBHVLTOEPFLEOTRSRAWDSETCTMLEO2C8A3TIONS
7. FOR C8A. NFOARDCAAN,AVDAAP, VOAPROBRABRARRIREIERRMMUUSSTTBBEESUSITUAIBTALEBFLOER 90° C FOR 990. °ACCCESS ABOVE CEILING REQUIRED
4. SUITABLE FOR WET LOCATIONS
8. ACCESS ABOVE CEILING REQUIRED
Installing Lens Accessories
A3 fixture
A.1 Optional lens accessories can simple snap into fixture head to secure.
A.2 If needed: lens accessory can be removed by inserting the flat prybar in between the endcap & the fixture head. Followed by carefully prying out the accessory.
A.3 If needed: lens accessory can be removed by inserting the flat screwdriver in between the endcap & the fixture head. Followed by carefully prying out the accessory.
fixture head
A.1
lens accessory
screwdriver A.3
SAC-LU-3/5/12
7777 Merrimac Ave
777N7ilMees,rrIiLm6a0c7A1v4e
REV0.5 05042023
NTil2es2,4I.L363037.164033 TF22224.43.3735.670.373557 [email protected]
Page 5 of 6 [email protected]
5 / 5
www.luminii.com
SAC-L3-3/5/12 SAC-L6-3/5/12 SAC-EL-3/5/12
prybar
A.2
Aiming Fixture Head
B3
fixture
Note: If fixture head locked in position slightly loosen the nylon set screws to adjust. Once beam angle is achieved, tighten nylon set screw to secure the position.
nylon set screw fixture head
30° 30°
*LUMINII RESERVES THE RIGHTS TO CHAN*LGUMEISNPIIERCEISFEICRAVTEISOTNHE&RIINGHSTTSRUTCOTCIOHANNGWEISTPHEOCUIFTICNATOIOTNIC&EINSTRUCTION WITHOUT NOTICE
REV0.3 02102021
Home - Luminii
