Aladdin Ams-10rgb Led Lighting Instructions

Aladdin Ams-10rgb Led Lighting Instructions

AMS-10RGBAladdin AMS 10RGB LED Lighting

PRINCIPAL SPECIFICATIONS

Compatible sheet typesBi + RGB 10W
Range of dimming1% ~ 100.0% (1% resolution)
Color temperature2850k ~ 6098k, Hue 0 ~ 360
Output powerUp to 10W
Output channel5 channels / Bi‐Color + RGB
User interfaceGraphic OLED (128 X 64)
Input power sources5V USB‐C
Supports wirelessBluetooth LE
 SUMMARY

Flicker free high precision dimming controller 

  • It can adjust to 2500 steps for dimming control

Useful OLED screen 

  • The small OLED screen displays useful information for the operator
  • It provides an easy way to set the parameters with three buttons

Provides a variety of remote control methods 

  • It supports Android or iPhone controller by Bluetooth LE

CAUTION

Please keep the below things in mind before using the product and if you have a problem, please  get in touch with the store or warranty service number

  • Do not use near flammable’s and heater
  • Do not use in rain or places where the product may get wet
  • Do not expose to direct sunlight
  • The product will heat up when you use it for a long period of time, In this case, you should be careful to touch and you would better to separate between the dimmer and power source to  prevent thermal conduction by power source
  • Use the product only in the temperature range from ‐10℃ to 40℃
  • Use the product with power sources that we suggested
  • Keep out of infants
  • Do not touch with wet hands

DESCRIPTION Aladdin AMS 10RGB LED Lighting - DESCRIPTION

OPERATION

OLED STATE 
Bi – Fast
30%   3500k
Bi-Color mode, 
Control dimming and Kelvin in Bicolor
HSI – Fast
30%   Hue:180
RGB Mode, 
Control dimming and Hue in RGB
Effect
Strobe 25
Effect mode
Control effects with dimming volume
‐ Strobe,  Fade,  Flicker,  Flash,  Police,  Welding,  Fire,  Candle,
Television, Dissolve 
Control effect speed with the color volume
Fast or AccuracySelect fast mode or accuracy mode with click color volume
Bi or HSI or EffectSelect Bi or HIS or Effect mode with click dimming volume
 Black
Out
Click dimming volume and hold
Lock
On or Off
Click color volume and hold

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  conditions:
(1) This device may not cause harmful interference. and
(2) This device must accept any interference received, including interference that may cause undesired operation.

Caution
Any changes or modifications (including the antenna) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.

To comply with FCC RF exposure compliance requirements, a separation distance of at least 20  cm must be maintained between the antenna of this device and all persons. This device must not be co‐located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,  which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

WARRANTY

We offer a one‐year free warranty period after purchased and you can continually get a warranty service with extra charge after the expired free warranty period  We do not guarantee the service for free of charge in case of below even though it is within  free warranty period

  • Product failure due to consumer negligence
  • Product failure due to power trouble that we did not allow
  • Product failure due to disassembling by unofficial facilities that we did not allow
  • Product failure due to natural disaster

Thank you for purchasing our product

Purchased store: 
Purchased date: 
Manufacturer: Aladdin www.aladdin‐lights.com / tel. +82‐2‐386‐1245

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals