Sussex Vtrs700 Voda Towel Rail Single Instruction Manual

VTRS700 Voda Towel Rail Single

Product Information:

  • Product Name: Voda Towel Rail Single
  • Available Sizes: 700mm, 900mm
  • Product Code: CBM
  • Manufacturer: sussextaps.com.au
  • Installation Guidelines: AS/NZS 3718:2005 LIC. 20081
  • Recommended Working Water Pressure: 300-500 kPa
  • Maximum Water Temperature: 65°C

Product Usage Instructions:

  1. Measure the distance between the centers of the supplied towel
    rail.
  2. Make sure the centers are approximately 700mm or 900mm
    apart.
  3. Drill two 6.5mm holes on the wall at the measured center
    points.
  4. Insert the provided Tox Plug Brass Wall Fixing into the drilled
    holes.
  5. Secure the towel rail to the wall by fastening it with the
    provided screws.
  6. Use the Stainless Steel Set Screws to ensure a secure
    attachment.
  7. Note that tapware installation should be done by a Licensed
    Plumber in accordance with AS/NZS 3500:2003.
  8. Ensure that the working water pressure is within the
    recommended range of 300-500 kPa.
  9. The maximum water temperature for this product is 65°C.

Voda
Towel rail single
Approximately 700/900mm Centres 6.5mm Drilled Holes Tox Plug Brass Wall Fixing Fastening Screw
Measure between centres of the supplied
Stainless Steel Set Screws x 2
sussextaps.com.au

Product code: CBM

Product code

VTRS700 VTRS900

Towel rail single 700mm Towel rail single 900mm

Installation guidelines
– This product is supplied pre-assembled within its packaging. – Using the supplied 2mm Allen Key, loosen the Stainless Steel Set Screws and remove the Brass Wall Fixings. – Accurately measure the distance between the centres of the assembly as supplied. – Choose the desired location for mounting and mark-out measured centres. – Follow sequence as drawn to secure the Brass Fixings. – Align and fit the product as a combined assembly over the Brass Wall Fixings. – To complete installation tighten Stainless Steel Set Screws.

AS/NZS 3718:2005 LIC. 20081
Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2003 Recommended working water pressure 300-500 kpa. Maximum water temperature is 65 deg.c
Copyright © Sussex Taps.

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals