HJH92B Ble Smart Home Remote Control
Product Information
The Smart Home HJH92B Ble is a smart home device with remote
control functionality. It is equipped with head and foot motors
that can extend and retract, allowing for customized massaging
experiences. The device also features a button lock function, a
reset button, and a coding method for operation.
The remote control consists of several buttons for controlling
the device. The specific functions of each button are outlined
below:
- Head Motor Extend/Stop: This button extends and stops the head
motor when pressed. - Head Motor Retract/Stop: This button retracts and stops the
head motor when pressed. - Button Lock: Pressing this button for about 5 seconds locks the
remote control, except for the flashlight button. The backlight
flashes to indicate the lock status. Pressing it again for about 5
seconds unlocks the remote control. - Reset: This button, labeled FLAT, resets the device. When
pressed, all motors retract to the minimum stroke position, the
massager closes, and the previous state is preserved. - Foot Motor Extend/Stop: This button extends and stops the foot
motor when pressed. - Foot Motor Retract/Stop: This button retracts and stops the
foot motor when pressed.
Coding Method
The coding method for operating the device is not specified in
the user manual.
Precautions
To ensure the reliability and safety of the motor and control
box, it is advised not to frequently switch the buttons.
Caution
This device complies with Part 15 of the FCC Rules. It must not
cause harmful interference and must accept any received
interference that may cause undesired operation. Any changes or
modifications not approved by the responsible party may void the
user’s authority to operate the equipment.
Compliance
This equipment has been tested and found to comply with the
limits for a Class B digital device, according to Part 15 of the
FCC Rules.
Product Usage Instructions
- To extend or stop the head motor, press the corresponding
button labeled “Head Motor Extend/Stop”. - To retract or stop the head motor, press the corresponding
button labeled “Head Motor Retract/Stop”. - To lock the remote control, press and hold the “Button Lock”
button for about 5 seconds. The backlight will flash three times to
indicate the lock status. To unlock the remote control, press and
hold the “Button Lock” button again for about 5 seconds. - To reset the device, press the “Reset” button labeled “FLAT”.
This will retract all motors to the minimum stroke position, close
the massager, and maintain the previous state. - To extend or stop the foot motor, press the corresponding
button labeled “Foot Motor Extend/Stop”. - To retract or stop the foot motor, press the corresponding
button labeled “Foot Motor Retract/Stop”.
Please refer to the user manual for any additional information
or safety precautions.
Product function manual
Smart home HJH92B Ble
Remote control button map
Remote control function description
Button label
Features
Press the flashlight to light up, release the flashlight to extinguish (default 10S) Reuse function: Press and hold the key for 5s, the backlight will flash and enter the memory mode. Press ZG/SNORE/M1 within 2s, the buzzer will ring, and the current motor position, the status of the massager and the light bar can be memorized. Press and hold the flashlight+LOCK for about 11s at the same time, the backlight will flash, and all the buttons on the remote control will enter the one button release mode. You can reset all the memory positions to the factory default memory positions at the same time. At the same time, press and hold the flashlight+FLAT for about 6s, the backlight flashes, all buttons on the remote control enter the continuous pressing mode, and release the button to stop the motor.
The head motor extends and stops when it is released
Head motor retracted, released and stopped
Press the key for about 5s, the backlight flashes for 3 times, and the remote control is locked (except for the flashlight, the other keys are locked, and the backlight flashes when pressing); Press the button for about 5s, the backlight flashes 3 times, and the remote control is unlocked; FLAT one button reset, all motors retract to the minimum stroke position, close the massager, and keep the state before pressing the button (no reset when powered on)
The foot motor extends and stops when it is released
Foot motor retracted, released and stopped
Coding method:
Single control box/single remote controller: press the head up and foot down buttons until the backlight flashes, and clear the code matching information of the remote controller; Power on the control box again, and the control box will be in the code matching state within 60s. Keep pressing the head down and foot up buttons of the remote control until the buzzer rings and the backlight flashes, indicating successful code matching Note: If any key is pressed for more than 50s, the remote control will go into sleep. If it is released and pressed again, the function can be resumed (if it is pressed for 3s, the backlight will flash all the time, and if it is pressed for 50s, the remote control will go into sleep)
Precautions: To protect the reliability and safety of the motor and control box, do not switch the buttons frequently.
Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.
