MONO 40 B 30W Ceiling Lamp
Product Information
The product is called MONO/MONO P-Z and it comes in different
models: MONO 40, MONO 60, MONO 80, and MONO 100. It is available in
two versions: MONO and MONO P-Z. The product features a color
temperature switch for adjusting the color temperature between
4,000K and 3,000K. There is also an optional prismatic diffuser
available for some models. The product is designed for indoor use
with an IP rating of 20.
The product is powered by a driver that operates on a voltage of
220-240V AC at a frequency of 50/60Hz. It supports different
dimming options including Push Dim, DALI/Push Dim, DALI Dim, and
Triac Dim. The specific dimming method depends on the model and
type of dimmer used.
For installation, it is important to turn off the main power
before proceeding to prevent any possible electric shock. The
installation should be carried out by a qualified technician or
person. When handling the lampshade/diffuser, it should be done
carefully as it is fragile. If the product has an integrated LED
light source, only a technician or qualified person should perform
the replacement. The manufacturer is not responsible for any
incorrect use or assembly of the product.
For more information, visit www.led2.eu.
Product Usage Instructions
- Before starting, turn off the main power to prevent electric
shock. - Ensure that the installation is carried out by a qualified
technician or person. - If the product has a lampshade/diffuser, handle it carefully as
it is fragile. - For models with an integrated LED light source, only a
technician or qualified person should perform the replacement. - Refer to the specific model and type of dimmer to determine the
appropriate dimming method. - Connect the product to the power supply using the provided
driver. The driver operates on a voltage of 220-240V AC at a
frequency of 50/60Hz. - Follow the instructions for the chosen dimming method (Push
Dim, DALI/Push Dim, DALI Dim, or Triac Dim) to control the
brightness of the product. - For adjusting the color temperature, use the color temperature
switch. The available options are 4,000K and 3,000K. - If desired, install the optional prismatic diffuser according
to the provided instructions. - Ensure that the product is used indoors only, as it is designed
for indoor use with an IP rating of 20.
Note: It is important to follow all safety precautions and
instructions provided in the user manual during installation and
usage of the product.
MONO/MONO P-Z
The installation may only be carried out by a technician Nur ein Techniker kann die Installation durchführen Instalaci smí provádt pouze technik Instaláciu môze vykona iba technik
This product contains a light source of energy efficiency class G Dieses Produkt enthält ein Leuchtmittel der Energieeffizienzklasse G Tento výrobek obsahuje svtelný zdroj tídy energetické úcinnosti G Tento výrobok obsahuje svetelný zdroj triedy energetickej úcinnosti G
MONO 40, 60, 80, 100
1
2
3
4
5
a
b
6
7
L
L
8 CCT SWITCH (OPTIONAL)
9
N N
4.000K
3.000K
Color temperature switch Farbtemperatursteuerung
Pepínac barvy svtla Prepínac farby svetla
9 prismatic diffuser (OPTIONAL) 10
2x
OPAL + PRISM
MONO 40 P-Z MONO 60 P-Z
1
2
3
4
5
6
L L7
N N
8
9
10
11
12
L
L 13 CCT SWITCH (OPTIONAL)
14
14 prismatic diffuser (OPTIONAL) 15
N N
4.000K
3.000K
2x
Color temperature switch Farbtemperatursteuerung
Pepínac barvy svtla Prepínac farby svetla
OPAL + PRISM
MONO 80 P-Z MONO 100 P-Z
1
2
3
4
5
xx
xx
abc
4x
IP 20
www.led2.eu
MONO/MONO P-Z
6
7
a b
12
13
8
L L9
N N
14
L L N N
CCT SWITCH (OPTIONAL)
3.000K
4.000K
15
Color temperature switch Farbtemperatursteuerung
Pepínac barvy svtla Prepínac farby svetla
B A
10
11
15 prismatic diffuser (OPTIONAL) 16
2x
OPAL + PRISM
CONNECTION – DIMMABLE VERSION – OPTIONAL VERBINDUNG – DIMMBARE VERSION – OPTIONAL ZAPOJENIE – STMIEVATENÁ VERZIA – NA VYZIADANIE ZAPOJENÍ – STMÍVATELNÁ VERZE – NA VYZÁDÁNÍ
1
PUSH DIM
220-240 V 50/60 Hz
L N
DRIVER
~ SEC
~
PRI
+ LED LED
PUSH
2
DALI/PUSH DIM
220-240 V 50/60 Hz
L N
DRIVER
~ SEC
~
PRI
+ LED LED
DA/N DA/L
3
DALI DIM
220-240 V 50/60 Hz
L N
DA DA
DRIVER
~ SEC
~
PRI
+ LED LED
DA DA
4
TRIAC DIM
220-240 V 50/60 Hz
L N
Phase cut Triac dimmer
DRIVER
~ SEC
~
PRI
+ LED
LED
Trailing edge Leading edge
(EN) CAUTION! Turn off the main power before proceeding with the installation in order to prevent possible shock. The installation may only be carried out by a technician or a qualified person. If the lamp has a lampshade/diffuser, handle it carefully as it is fragile. With an integrated LED light source, only a technician or a qualified person can make the replacement. The manufacturer is not responsible for the incorrect use and assembly of its products.
(DE) ACHTUNG! Vor der Installation ist es notwendig, den Hauptstromkreis zu unterbrechen, um ein Stromschlag zu vermeiden. Die Installation darf nur von einem Techniker oder einer qualifizierten Person durchgeführt werden. Wenn die Lampe einen Lampenschirm/Diffuser hat, gehen Sie vorsichtig damit um, da sie zerbrechlich ist. Mit einer integrierten LED-Lichtquelle kann nur ein Techniker oder eine qualifizierte Person den Austausch vornehmen. Der Hersteller ist nicht verantwortlich für die fehlerhafte Verwendung und Montage seiner Produkte.
(SK) UPOZORNENIE! Pred instaláciou je nevyhnutné odpoji hlavný elektrický okruh, aby ste predisli zasiahnutiu elektrickým prúdom. Montáz môze vykona iba kvalifikovaná osoba. V prípade, ze má svietidlo tienidlo/difúzor, narábajte s ním opatrne, pretoze je krehké. Pri integrovanom LED svetelnom zdroji môze výmenu zrelizova iba technik alebo kvalifikovaná osoba. Výrobca nenesie zodpovednos za nesprávne zachádzanie s produktom.
(CZ) UPOZORNNÍ! Ped instalací je nutné odpojit hlavní elektrický okruh, abyste pedesli zasazení elektrickým proudem. Montáz mze provádt pouze kvalifikovaná osoba. V pípad, ze má svítidlo stínidlo/difuzor, zacházejte s ním opatrn, protoze je kehké. Pi integrovaném LED svtelném zdroji mze výmnu zrelizova pouze technik nebo kvalifikovaná osoba. Výrobce nenese odpovdnost za nesprávné zacházení s výrobkem.
IP 20
www.led2.eu
uvod - architectural lighting
