Wunderlick 35701-XX Brake Lever
Product Usage Instructions
- STEP 1: Apply Montagepaste (fitting lubricant) to the screw (Schraube).
- Ensure the thread locking fluid (Schraubensicherung) is applied to the screw.
- Use a torque wrench (Drehmoment) to tighten the screw to 3.0 Nm of torque.
- Clean the brake lever (Bremshebel) using a suitable cleaner (Reiniger).
- STEP 2: Use an original BMW torque wrench to tighten the screw to 6.0 Nm of torque.
- Clean the brake lever again using a suitable cleaner.
- Note: Please refer to the original BMW instructions for tightening the screw to 1.0 Nm of torque.
- STEP 3: No specific instructions given in the provided text.
- STEP 4: No specific instructions given in the provided text.
- STEP 5: No specific instructions given in the provided text.
- STEP 6: No specific instructions are given in the provided text.
Please note that the information provided is based solely on the text extract from the user manual/instructions, and additional details may be required for a comprehensive understanding of the product and its usage.
Key
- Fitting tip
- Attention
- Magnification
- Fitting lubricant
- Screw
- Thread locking fluid
- Torque
- Cleaner
Installation Instructions
- Lever length provides continuous adjustability. (35mm)
- 6-stage adjustable gripping distance!
Warning: The brake pump in must not tilt when inserted into the pressure sleeve
More Information
Management System
Scan
- Verifiziert gemäß genehmigungs- relevanter Anforderungen
- www.tuv.com
- ID 9000012000
