Lenrue Speaker A10 User Manuals

Lenrue speaker A10

USER’S MANUAL

Customer Service

12-month limited warranty
Lifetime technical support
Contact Email: [email protected]

What‘s included

The above pictures are just for reference only.

Attention

1. Use original or certified cables
2. Don’t expose to liquids
3. Don’t disassemble
4. Avoid dropping
5. Avoid extreme temperatures
6. Don’t listen to music for long time in high volume enviroment.

At a Glance

Quick Start Guide

1. Turn on/off

2. Pair with you device

TWS Connect

1)Turn on the two speakers and enter the Wireless mode, double-click one of the ‘M’ keys to connect the two speakers.

2)After connecting A10 with wireless device, you can play music to realize double surround sound.

Using Your Speaker

1. Turn on/off

Press and hold Power on/off button for 2 seconds, when LED ring around buttons rapidly flashing blue_; speaker is in pairing mode.

Press Power on/off button again to turn on / off the LED ring.

Press and hold again to turn off speaker.

2. Select mode

Press M (Multi-function button) to select mode between Bluetooth Mode / AUX Mode/SD Card Mode.

*Inserting an SD card will automatically switch to SD card mode.

A. Wireless mode

1. Turn on speaker.
2. Turn on Wireless on Smartphone or other devices.
3. Find Wireless name in waitlist and tap it for connection.

Play / pause

Answer/end call

Press Play/pause for a answering a coming call, double press to end the call

Force disconnect Wireless

Press and hold play/pause to disconnect Wireless, speaker enters to pairing mode

Volume up / down

Press to volume up/down

Next track/Previous track

Press and hold for next/previous track

When turned on, speaker will automatically connect to the last connected device if available. If not, speaker will enter pairing mode.

To pair a different device, press and hold play/ pause button for 3 seconds to re-enter pairing mode. Then repeat the pairing steps.

Having connection problems?
Remove speaker from your device’s Bluetooth history,
ensure it is less than 3 feet away then try pairing again.

B. AUX-In mode.

Connect speaker with provided 2 in 1 cable with Micro USB end, 3.5mm audio jack plugging other devices.
Press M(Multi-function button) to enter AUX mode.
When using AUX mode, control audio playback via the connected device.

C. SD card mode

In SD card mode, control audio playtrack as same as Bluetooth mode
★Support a class 4 or above micro SD card, up to 32GB
★support audio formats: MP3, WMA, WAV, etc.

3. Charge your Speaker

Please charge your speaker when speaker gives tones.

Using the included USB cable to charge your speaker and make sure it is fully charged before firstuse.

Specifications

FCC Caution

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• -Reorient or relocate the receiving antenna.
• -Increase the separation between the equipment and receiver.
• -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• -Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.