FM 3000 L Built In Frame
Product Information
The FM 3000 L, FM 3000, FM 2000 L, and FM 2500 are microwave
frames designed to fit in kitchen cabinets. The installation of the
frame requires attaching holders and buffers/supports to create a
secure space for the microwave. The space size required for
installation is 566 mm x 550 mm x 366 mm.
Product Usage Instructions
- Ensure that there is enough space in the kitchen cabinet to fit
the microwave frame with the required space size of 566 mm x 550 mm
x 366 mm. - Attach four pieces of holders with two screws each on the left
and right side of the space provided. - Attach the template on the bottom of the space to determine the
position of the buffer/support. - Attach both buffer/support with two screws on each
buffer/support. - Insert the microwave into the space provided by placing the
back legs of the microwave above the hole buffer/support. - Adjust the position of the microwave with the back legs into
the holes on the buffer/support at the back and most of the front
legs into the holes on the buffer/support at the front. - Pull forward the microwave until the foot of the front side
fits into the hole of buffer/support at the front to strengthen its
position. - Attach the microwave frame from front to relate with the
holder. - Ensure that the microwave frame is installed correctly and
neatly.
Note: Always follow the installation instructions carefully to
avoid damage or injury. If you encounter any issues during
installation or usage, contact customer support for assistance.
User Manual Book
Built In Frame
FM 3000 L, FM 3000 FM 2000 L, FM 2500
INSTALLATION
To install the frame of microwave (FM 2000, FM 2500, FM 3000) on the kitchen cabinet, follow the installation below:
1. Make space to put a microwave oven in your kitchen cabinets will be installed frame with space size 566 mm x 550 mm x 366 mm
2. Attach 4 pieces Holder with 2 screws each holder on the left and right side in the space provided.
3. Attach the template on the bottom of the space that has been prepared to determine the position of the buffer / support.
4. Attach both
buffer/
support with 2 screws on
each buffer / support.
5. Insert your microwave into a space that has been provided with put a back legs microwave first above the hole buffer/ support.
6. Adjust the position of the microwave with the position of the back legs into the holes on the buffer / support the back and most of the front legs into the holes on the buffer / support the front.
7. To strengthen the position of the microwave, pull forward the microwave until the foot of front side into the hole of buffer / support the front.
8. Attach
the
frame
microwave from front to
relate with the holder.
9. Ensure the frame microwave installed correctly and neatly.
05/21
