Antarctic Spider Automatic Watch
Product Information:
The Antarctic Spider Automatic is a watch with various parts
including the hour hand, minute hand, seconds hand, band, case,
crown, date window, and dial. The watch has different crown
positions for different functions.
- Position 1: Normal position
- Position 2: Manual winding
- Position 3: Setting the date
- Position 4: Setting the time
The watch has a power reserve of 38 hours and is an automatic
winding movement. With regular wear, the movement will wind itself
and manual winding may not be required. However, if the watch is
not worn for a certain amount of time, the power reserve will be
exhausted and the watch will stop.
Product Usage Instructions:
- To manually wind the movement:
- Turn the crown to position 1 (normal position).
- Unclockwise turn the crown to unscrew it to position 2.
- Twist the crown clockwise approximately 8-9 times to manually
wind the movement. - Screw in the crown back to position 1 (normal position).
- Pull the crown out to position 3.
- Turn the crown counterclockwise to set the desired date. Avoid
setting the date between 9 PM and 3 AM to ensure proper day
change. - Screw in the crown back to position 1 (normal position).
- Pull the crown out to position 4.
- Turn the crown counterclockwise to set the desired time. Avoid
setting the date between 9 PM and 3 AM to ensure proper day
change. - Screw in the crown back to position 1 (normal position).
ANTARCTIC SPIDER
AUTOMATIC
ANTARCTIC SPIDER AUTOMATIC Watch parts
Hour hand Minute hand Seconds hand
1
Band Case
Crown Date window
Dial
ANTARCTIC SPIDER AUTOMATIC Crown Position
12
34
1 Position normal 2 Manual winding 3 Setting the date 4 Setting the time
2
ANTARCTIC SPIDER AUTOMATIC Manual winding
1
2
1. 1 Position turn the crown unclockwise , unscrew crown To 2 position
2. 2 Manual winding
To manually wind the movement twist the crown clockwise approximately 8-9 times and keep wearing .
This an automatic winding movement. with daily wear the movement will wind itself and will not require manual winding. but it is not worn for a certain amount of time, its power reserve (in this model, 38 hours) is exhausted, and the watch stops.
3. Screw in crown back to normal position1 1
2
ANTARCTIC SPIDER AUTOMATIC Setting the date
1. 2 Crown out to the 3 position
1
2
3
2. Turn the crown counterclockwise for date setting.
Do not set the date between 9 PM and 3 AM, otherwise the day may not change properly.
3. Screw in crown back to normal position 1
3
ANTARCTIC SPIDER AUTOMATIC Setting the time
1. 2 Crown out to the 4 position
1
2
34
2. Turn the crown counterclockwise for date setting.
Do not set the date between 9 PM and 3 AM, otherwise the day may not change properly.
3. Screw in crown back to normal position 1
4
