WT120C G2 Coreline Waterproof LED Light
Product Information
The product has a lifespan of 100,000 hours and has an L70
rating. The product code is 05 444170173404 and it has an E -+
100mm dimension. The product has an optional anti-vandal mounting
feature that comes in a pack of two.
Installation Instructions
- Switch off the power supply before installation.
- For vertical installation, use the wire suspension method.
- For side or mid-entry, use the knock-out for cable entry
feature which is optional. - For anti-vandal mounting, use the nuts provided in the pack of
two. Tighten the nuts for 1a, 1b, 2b.1, and 2b.2 using a torque
wrench set at 1Nm except for 2b.1 and 2b.2 which require a torque
wrench set at 27 2Nm. - For replacing the silicone plug or waterproof plug, use a
screwdriver with a minimum size of 6mm. - Only use the optical sub-assembly delivered with the housing in
one box.
Life 100 khrs
L70
05 444170173404
E -+ 100mm
OPTIONAL ANTI-VANDAL MOUNTING
x2
1
a)
b)
1Nm
Vertical installation
c)
d)
wire suspension
e)
f)
x2
x2
x2
Do not tighten the nut
1a
a)
b)
c)
d)
–
E + 100mm
1Nm
x2
mandatory!!! tighten the nut
(antivandal)
e)
f)
x2
x2
Do not tighten the nut
1b
Switch off the power supply before installation
45
30 8
Ø 1.0-2.5mm²
2
Ø 8-12mm
Through Wiring /TW/ (optional) Ø 20mm
2a
Mid- or side – entry (optional) Knock out for cable entry
a)
b)
d)
e)
2b.1
–
E + 100mm
1Nm
x2
x2
mandatory!!! tighten the nut
(antivandal)
!
27 2Nm
!
27 2Nm
(*) NYM cable is suitable for TW
Switch off the power supply
!
before installation
c)
45
24
30 8
27
f)
2Nm
Ø 1.0-2.5mm²
Ø 8-12mm
2/4
Knock out for cable entry
a)
b)
Switch off the power supply before installation
45
30 8
c)
2b.2
d) Repeat 2b.1 d, e, f process
Ø 1.0-2.5mm² Ø 8-12mm
Replacement of Silicone Plug(optional)
!
a)
b) New Silicone Plug
27
2Nm
Replacement of waterproof plug(optional)
a)
b)
!
24 27 2Nm
1.6Nm
c)
Ø 12-14mm
d)
c)
Minimal screwdriver size min. 6mm
2c
2d
Use only optical sub-assembly
3
that delivered with housing in one box!
4a
4b
5
2 2
1
6
3/4
