6 Bike Wall Mount
Product Information: 3 or 6 Bike Rack
The Koova 3 or 6 Bike Rack is a product designed to hold up to
three or six bikes respectively. The product includes one or two
Koova Struts (depending on whether it is a 3 or 6 bike rack) and
three or six Bike Hooks. The maximum weight limit for this product
is an evenly distributed 150 pounds per Koova Strut. The product is
designed to hold nearly any size bike, and if you have an unusually
large bike, you can contact Koova for Jumbo bike hooks. The product
comes with all the hardware and components necessary for
installation, including Koova Screws, Koova Nuts, Lag Bolts, Flat
Washers, and a Socket wrench with 5/16 socket.
Product Usage Instructions:
- Read all instructions prior to starting the installation
process. Wear safety glasses if using power tools. Use only
included hardware and components. - Locate the wood studs in the wall where you want to install the
Koova Bike Rack. You can use a stud finder or visit
https://koova.com/pages/product-support for safe alternatives to
using a stud finder. - Measure the length of your bike to determine the appropriate
distance between the Koova Struts. - Mark the mounting location for the Koova Struts on the wall
using a pencil. For the 6 bike rack, place the second strut at
least 15 inches from either side of the first strut. - Mount the Koova Strut onto the wall using the included
hardware. Ensure that both bolts are tightened all the way. - Attach the Bike Hooks onto the Koova Strut using the included
hardware. Ensure that the hooks are securely attached to the
strut. - Hang your bikes on the Bike Hooks. Ensure that the weight is
evenly distributed and does not exceed the maximum weight limit of
150 pounds per Koova Strut.
If you are installing the product on masonry walls, you will
need hardware specific for this use. Please contact Koova to obtain
a masonry installation kit at [email protected]. Ensure that no
electrical wires are located where you are using Koova Lag Screws
to avoid serious bodily injury, property damage, or electrocution.
For any assistance, contact Koova at [email protected] or visit
koova.com.
Koova also offers other great organizational solutions for
overhead bin organization, skateboard organization, garden &
garage organization, home organization, tool organization, and home
office organization. You can shop for these products at
koova.com.
3 OR 6 BIKE RACK
INSTALLATION INSTRUCTIONS FOR 3 OR 6 BIKE RACKS
v4.3
1x Koova Strut (2x for 6 Bike Rack)
3x Bike Hooks (6x for 6 Bike Rack)
TOOLS NEEDED
Socket wrench with 5/16″ socket
2x Lag Bolt (4x for 6 Bike Rack)
Phillips head screwdriver Stud finder (recommended)
2x Flat Washer (4x for 6 Bike Rack)
6x Koova Screws (12x for 6 Bike Rack)
6x Koova Nuts (12x for 6 Bike Rack)
Pencil for marking mount Location level (optional)
INSTALLATION WARNING
EQUAMYLOOTUUORNTLTHOINENGLGEHENSEGTIGTBHHIKTOEIF.S
Read all instructions prior to starting. Wear safety glasses if using power tools. Use only included hardware and components.
To safely support the weight of your bikes, ensure that the included Koova Lag Bolts are securely installed into wood studs. Failure to mount the Koova System in studs may result in damage to property and/or personal injury.
If you are installing this product on masonry walls, you will need hardware specific for this use. Please contact us to obtain a masonry installation kit at [email protected].
Do not exceed the maximum weight limit for this product which is an evenly distributed 150 pounds per Koova Strut.
Ensure that no electrical wires are located where you are using Koova Lag Screws. Failing to ensure that no wiring exists where screws are inserted into a wall can lead to serious bodily injury, property damage or electrocution.
STEP ONE: LOCATE STUDS
· Locate a stud using a stud finder or alternative method (figure a). Mark the center of the stud.
· Measure 16″ inches to either side to find a second stud and make a second mark.
MEASURE BIKE LENGTH
NO STUD FINDER? If you do not have a stud finder, please visit https://koova.com/pages/product-support for safe alternatives to using a stud finder.
NEED A LEVEL? Your smartphone may have a level app already installed. If not there are many free apps available for most smartphones.
STEP TWO: MARK MOUNTING LOCATION
· The height of your Koova strut will be equal to the length of your largest bike. Measure your largest bike from the back edge of the back wheel to the front edge of the front wheel (figure b).
· The strut will mount on the stud at the height determined above. Mark this location.
· Make an additional mark at the same height on a second stud, 16″ apart from the first mark (figure c).
For the 6 bike rack, place the second strut at least 15 inches from either side of the first strut.
NEED ASSISTANCE?
Contact us at [email protected] or at koova.com
© 2021 Alphidia, LLC. ® 2019 Alphidia, LLC.
STEP THREE: MOUNT THE KOOVA STRUT
· Hold the Koova strut up to the wall so that you can see the two mounting marks through the slots. Place a washer on one of the lag bolts and line it up with the mark. Tighten with a 5/16″ wrench or socket (figure d).
· Tighten bolt half-way and locate the second mark. figure d · Insert the second lag screw with washer. Tighten
both bolts all the way.
STEP FOUR: ATTACHING THE BIKE HOOKS
· Insert a Koova Screw into each of the front holes on the Bike Hook and loosely connect a Koova Nut figure e onto each screw. Make sure the Koova Nut “teeth” face the back of the attachment (figure e).
· With the Koova Nut horizontal, place the attachment on the Koova Strut. Loosely tighten the screw, rotating the Koova Nut so that it is oriented vertically.
· Slide the attachment to the desired position (figure f) and tighten. To properly support the weight of your bikes, make sure the Koova nuts are vertical when tightened.
· Repeat with second hook. For figure f best results space evenly as shown in figure g.
The Koova 3 and 6 Bike Rack is designed to hold nearly any size bike. If you have an unusually large bike (including large fat tire bikes) that are not fitting well, contact us for Jumbo bike hooks.
figure g
KOOVA HELPS YOU PUT EVERYTHING IN ITS PLACE!
OVERHEAD BIN ORGANIZATION
SKATEBOARD ORGANIZATION
GARDEN & GARAGE ORGANIZATION
HOME ORGANIZATION
TOOL ORGANIZATION
HOME OFFICE ORGANIZATION
SHOP KOOVA.COM FOR OTHER GREAT ORGANIZATIONAL
SOLUTIONS
Garage and Home Wall Mounted Organization Storage Solutions - Koova
Garage and Home Wall Mounted Organization Storage Solutions - Koova
