Wabtec Asmb0876 Mini Rf Uhf Module Silabs Instructions

Wabtec ASMB0876 Mini RF UHF Module Silabs

© 2020 Wabtec Corporation. All rights reserved. The information contained in this publication is the property of Wabtec Corporation. This publication shall not be reproduced, redistributed, retransmitted, translated, abridged, adapted, condensed, revised or otherwise modified, in any form, in whole or in part, without the express written consent of Wabtec.
By accessing this, you agree that the information contained herein does not purport to cover all details or variations in Wabtec products or to provide for every possible contingency with installation, operation or maintenance. Should further information be desired, or should particular problems arise that are not covered sufficiently for the user’s purposes, the matter should be referred to Wabtec Corporation. Any applicable Federal, State or local regulations or company safety or operating rules must take precedence over any information or instructions given in the Technical Documentation. Wabtec has no obligation to keep the material up to date after the original publication.

WABTEC CORPORATION EXPLICITLY DISCLAIMS ALL WARRANTIES OF ACCURACY, MERCHANTABILITY OR FITNESS FOR ANY PURPOSE IN CONNECTION WITH THIS PUBLICATION AND USE THEREOF..

MANUFACTURER INFORMATION

INTRODUCTION

The product or product family described under scope of this document will be henceforth referred to as DEVICE.
This manual provides the information on the DEVICE, its variants, specifications, operation, maintenance, decommission and disposal.

SAFETY INFORMATION

The safety section includes safety precautions which must be observed when working on items that appear throughout the manual. Examples of safety precautions and labels are outlined below:

• Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
• Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury.
• Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
• Indicates a potential for equipment damage.

DISCLAIMER

These materials are provided for information purposes only, “as is” without express or implied warranty of any kind. Wabtec makes no ANY EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER EXPRESS OR IMPLIED WARRANTY REGARDING ANY PRODUCTS DESCRIBED in these materials.
To the maximum extent permitted by law, Wabtec disclaims any and all implied warranties that might otherwise arise or apply, including any implied warranty of merchantability or of fitness for a particular purpose. Wabtec further makes no representation or warranty of accuracy of these materials and neither Wabtec will have no responsibility or liability for any error or omission in these materials.
These specifications are subject to change without notice.

COMPANY DETAILS

Industrea Mining Technology Pty Ltd (trading as Digital Mining Technology) 3 Co-Wyn Close
Fountaindale, New South Wales, 2258
Australia

• Telephone: +61 2 8863 4730
• [email protected]
• www.wabteccorp.com

Industrea Mining Technology Pty Ltd is a registered business subsidiary of Wabtec Corporation

GENERAL FEATURES

The ASMB0876 is a digitally controlled radio module implemented on an industry-standard M2.xx style circuit board. This module can use used in a host controller board to provide a short-range, power-limited UHF radio link for a variety of applications.

Key features include:

• Silabs Si4463 digitally controlled radio
• Power supply regulation/conditioning
• Serial interface
• Dual RF antennae ports under firmware control for antennae diversity

ABBREVIATIONS

SCOPE & SPECIFICATION

This user manual covers Mini RF UHF Module Silabs Radio Module, Model No.: ASMB0876.

PIN CONFIGURATION AND FUNCTION

APPROVED ACCESSORIES LIST

The below table outlines the accessories that are approved for operation with this Module:
For V2V Radio operation, this module has been tested and approved for use with the antenna listed below. The module may be integrated with other antennas of the same type and antenna gains of less than or equal than the approved.
For 902-928 MHz frequency band:

For 869.400-869.650 MHz frequency band:

WARNINGS

• Keep this Integration Manual for later reference.
• Do not leave this Module in an uncontrolled environment where the storage temperature is below-40°C (-40°F) or above 85°C (176°F). This may damage the DEVICE.
• Do not operate this Module outside specified temperature range. Refer to specification table for further information.

GENERAL INFORMATION

INTEGRATION
Module Integration should be in accordance with the procedures defined by Digital Mining Technology and only performed by the manufacturer or authorized representative. Host equipment must be configured to the modulation schemes and implement LBT to comply with the modular approval listed in Sec. 2.3 and adhere to all local regulations appropriate for automotive Installations in the end-user geographic region.

MAINTENANCE

This equipment is not intended to be maintained by the end user. Opening the enclosure should not be attempted, will void any warranty and could compromise the safe operation of the unit.
No user-serviceable parts.
Contact your local authorized representative for service arrangements.

DECOMMISSION AND DISPOSAL

Disposal of electronics should be done in accordance with local regulations.

Power should be disconnected before decommissioning.
The unit must not be treated as general waste. By ensuring that this product is disposed of correctly, you will be helping to prevent potentially negative consequences for the environment and human health which could otherwise be caused by incorrect handling of this product.
Waste Disposal Method: Recycling is encouraged. Dispose of in accordance with local, state and federal laws and regulations.
USA: Dispose of in accordance with local, state and federal laws and regulations.
Canada: Dispose of in accordance with local, state and federal laws and regulations.
EC: Dispose of in accordance with relevant EC Directives.

AUTHORIZED REPRESENTATIVES

Australia
Industrea Mining Technology Pty Ltd, Trading as Digital Mining Technology 3 Co-Wyn Close Fountaindale, NSW, 2258 Australia
Telephone

• +61 (2) 8863 4730
• [email protected]
• www.wabteccorp.com

Brazil
Wabtec Brasil Fabricação e Manutenção de Equipamentos Ltda Avenida General David Sarnoffn 4600 Cidade Industrial Contagem, MG 32210-110 Brazil

• Telephone: +55 (31) 2103 5348
• Fax: +55 (31) 2103 5100
• www.wabteccorp.com

Canada
Wabtec Transportation Canada Inc 27047 Oakwood Road, Oakbank, Manitoba, R0E 1J2 Canada

• Telephone: +1 (905) 251 0074
• www.wabteccorp.com

India
Wabtec India Industrial Private Ltd ITC Green Centre 6th Floor, Southwest Tower No.18, Banaswadi Main Road,
Maruthisevanagar Bangalore, Karnataka, 560005, India

• Telephone: +91 (080) 6838 7816
• www.wabteccorp.com

Indonesia

PT Intecs Teknikatama Industri Jl. Ciputat Raya No. 18D Kebayoran Lama Selatan, Jakarta, 12240 Indonesia

• Telephone: +62 (21) 729 3351
• Fax: +62 (21) 729 3352
• www.intecs.co.id

Mexico
Comercializadora Minera Norte, S.A. DE C.V. Ave. H. Colegio Militar No. 2000-B Col. Las Fuentes Piedras Negras, Coahuila México. C.P. 26010

• Telephone: + 52 (878) 783 8215 + 1 (830) 352 5519
• Fax: +52 (878) 783-8218
• www.cominsa.com.mx

North America
Digital Mining 2901 East Lake Road Erie, Pennsylvania, 16531 USA

• Telephone: +1 (480) 264 2063
• Fax: +1 (480) 264 6402
• www.wabteccorp.com

Sub Saharan Africa
Probe Integrated Mining Technologies (PTY) Ltd 245 Albert Amon Road Meadowdale, Germiston, 1614 South Africa

• Telephone: +27 (11) 453 0924
• Fax: +27 (11) 453 2141
• www.probebattery.co.za

PRODUCT APPROVALS AND REGULATORY INFORMATION

ASMB0876 module have modular approval and comply with FCC Part 15 and Canada Innovation, Science and Economic Development Canada (ISED) RSS-247 and RSS-Gen.

caution: Modifications to this product without written consent from the manufacturer or its designated authorized representatives could void the user’s authority to operate the equipment.

DECLARATION OF CONFORMITY 47 CFR § 2.1077 COMPLIANCE INFORMATION

We, Industrea Mining Technology Pty Ltd, T/A Digital Mining Technology, at 3 Co-Wyn Close, Fountaindale, NSW, 2258, Australia declare under our sole responsibility the products:

Complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC INTERFERENCE STATEMENT FOR CLASS B DEVICES

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

A shielded type Ethernet cord is required to meet FCC Class B emission limits and prevent interference to the nearby radio and television reception.
This device and its antenna(s) must not be co-located or operate in conjunction with any other antenna or transmitter.
The antenna is considered an integral system component. Use of any antenna other than those specified in the installation manual or supplied with the product may void the product’s compliance.

FCC RADIATION EXPOSURE STATEMENT
To comply with FCC RF exposure limits for general population / uncontrolled exposure, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

INDUSTRY CANADA COMPLIANT

This Class B digital apparatus complies with Canadian ICES-003. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

CONCERNING RADIO TRANSMITTERS

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

INDUSTRY CANADA – RADIATION EXPOSURE STATEMENT
To comply with Industry Canada RF exposure limits for general population / uncontrolled exposure, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

AUSTRALIAN RADIO COMMUNICATIONS EQUIPMENT – RADIATION EXPOSURE STATEMENT
The equipment complies with the Radiocommunications (Electromagnetic Radiation – Human Exposure) Standard 2014 for General Public Exposure, Non-Aware User, for a Compliance Level 2 Radiocommunications Equipment, when the minimum safety distance is adhered to, and shall bear the RCM.

DOCUMENT REVISION

DOCUMENT SIGN OFF

References

• COMINSA – Comercializadora Mineral del Norte
• Home - Intecs Teknikatama Industri
• Probe Group | Renewable Energy, Batteries & Inverters
• Homepage | Wabtec Corporation