Bola Sphere LED Pendant Light
Product Information
- Product Name: BOLA SPHERE
- Product Type: Pendant and Chandelier
- Power Supply: 120/240V
- Light Source: LED
- Light Control: Full range light control via 0-10V or ELV
dimmer - Cord Length: 8.9ft (270cm)
- Care Instructions: Wipe with a clean, damp cloth. Avoid
ammonia-based cleaners. - Manufacturer: Pablo Designs
- Contact Information: [email protected], 888 MARIN STREET
SAN FRANCISCO, CA 94124 PABLODESIGNS.COM
Product Usage Instructions – BOLA SPHERE PENDANT
(120/240V)
- Attach the mounting plate to the junction box or ceiling.
- Wire the transformer to the building electrical system. For US
wiring, connect black to black and white to white. For EU wiring,
connect blue to blue and brown to brown/red. - Cut the cord to the desired length and pass it through the
canopy. Wire the transformer to the lamp. For US wiring, connect
blue to braided and red to red. For EU wiring, connect black to
braided and red to red. - Tighten the set screws on the cord relief.
- Bring the canopy up to the mounting plate with bolts passing
through the holes. - Screw both caps down to secure the canopy in place.
- For 0-10V dimmer switch installations, use the purple and grey
cords. - Use provided gloves when handling the lamp to avoid finger
marks. - Screw the stem onto the stationary heat sink.
- Carefully screw the globe to the heat sink.
- Ceiling mounting is recommended to be installed by an
electrician.
Product Usage Instructions – BOLA SPHERE CHANDELIER (120V &
240V)
Important: We recommend that the fixture be installed by an
electrician. The BOLA SPHERE CHANDELIER must be securely anchored
to a 150lbs rated junction box or mounted to ceiling studs.
BOLA SPHERE
ASSEMBLY & INSTALLATION INSTRUCTIONS
TABLE OF CONTENTS pg. 1-6………….BOLA SPHERE PENDANT pg. 7-11……BOLA SPHERE CHANDELIER
BOLA
SPHERE PENDANT
120/240V ASSEMBLY & INSTALLATION INSTRUCTIONS
CANOPY TYPE A
CANOPY TYPE B
[email protected] 888 MARIN STREET SAN FRANCISCO, CA 94124
PABLODESIGNS.COM
pg. 1
120/240V ASSEMBLY INSTRUCTIONS
BOLA CANOPY
1. ATTACH MOUNTING PLATE TO JUNCTION BOX OR CEILING 2. WIRE TRANSFORMER TO BUILDING
(US: BLACK TO BLACK AND WHITE TO WHITE) ( EU: BLUE TO BLUE AND BROWN TO BROWN/RED) 3. CUT CORD TO DESIRED LENGTH AND PASS THROUGH CANOPY. WIRE TRANSFORMER TO LAMP (US: BLUE TO BRAIDED AND RED TO RED)
(EU: BLACK TO BRAIDED AND RED TO RED) NOTE: PURPLE AND GREY CORDS ARE USED ONLY WITH 0-10 V DIMMER SWITCH. 4. TIGHTEN SET SCREWS ON CORD RELIEF 5. BRING CANOPY UP TO MOUNTING PLATE WITH BOLTS PASSING THROUGH THE HOLES 6. SCREW BOTH CAPS DOWN, SECURING THE CANOPY
PURPLE
GREY
2
21
RED
DRIVER
3 3
BOLA IS A CLASS II FIXTURE. IT DOES NOT REQUIRE GROUNDING.
5
120/240V ASSEMBLY INSTRUCTIONS
BOLA SPHERE
USE PROVIDED GLOVES WHEN HANDLING LAMP TO AVOID FINGER MARKS.
21 SCREW STEM ONTO STATIONARY HEAT SINK
2 CAREFULLY SCREW GLOBE TO HEAT SINK.
4
IMPORTANT: WE RECOMMEND CEILING MOUNTING BE INSTALLED BY AN ELECTRICIAN pg. 2
6
LENGTH OF CORD SUPPLIED 8.9FT (270 CM)
LIGHT SOURCE LED FULL RANGE LIGHT CONTROL VIA 0 – 10v OR ELV DIMMER
LIGHT SOURCE REPLACEMENT CONTACT MANUFACTURER FOR REPLACEMENT
LENGTH OF CORD SUPPLIED 8.9FT (270CM)
CARE WIPE WITH A CLEAN, DAMP CLOTH. AVOID AMMONIA BASED CLEANERS.
pg. 3
CORD PATH DIAGRAM
2a.
2b.
BOLA SPHERE/FELT
BOLA DISC
BOLA HALO
1. a SECURE DRIVER TO MOUNT BRACKET WITH PROVIDED TAPE. b SECURE MOUNT BRACKET TO JUNCTION BOX OR CEILING USING APPROPRIATE ANCHOR METHODS. IMPORTANT! BE SURE TO REFERENCE CORD PATH DIAGRAM BEFORE MOVING ON.
2. BE SURE TO WEAVE CORD THROUGH ALL NECESSARY PARTS LISTED ABOVE BASED ON LAMP MODEL. a BEND WIRE ENDS BEFORE PASSING THROUGH STRAIN RELIEF. b PASS CORD THROUGH STRAIN RELIEF AND SET LAMP HEIGHT BY FASTENING BOTH (TOP AND SIDE) SET SCREWS. (IF NECESSARY: TRIM EXCESS CORD)
3. PLACE FASTENED STRAIN RELIEF ONTO MOUNTING BRACKET. (NOTE! STRAIN RELIEF SHOULD NEST INTO RECESS IN BRACKET SURFACE)
4. WIRE DRIVER TO BUILDING (US : BLACK TO BLACK/WHITE TO WHITE) (EU: BLACK TO BROWN/WHITE TO BLUE) NOTE: PURPLE AND GREY WIRES ARE USED ONLY IN 0-10V INSTALLATIONS.
5. WIRE DRIVER TO LAMP (RED TO RED/BLUE TO BLACK) 6. SECURE CANOPY COVER TO BRACKET ASSEMBLY WITH CANOPY NUT. TIGHTEN UNTIL FIRMLY IN PLACE.
1a.
3. 4-5.
6. 1b.
pg. 4
BOLA SPHERE PENDANT ASSEMBLY TO LAMP
GLOBE THREADS ONTO LIGHT ENGINE pg. 5
LIGHT SOURCE LED FULL RANGE LIGHT CONTROL VIA 0 – 10v OR ELV DIMMER
LIGHT SOURCE REPLACEMENT CONTACT MANUFACTURER FOR REPLACEMENT
LENGTH OF CORD SUPPLIED 8.9FT (270CM)
CARE WIPE WITH A CLEAN, DAMP CLOTH, AVOID AMMONIA-BASED CLEANERS.
IMPORTANT: WE RECOMMEND CEILING MOUNTING BE INSTALLED BY AN ELECTRICIAN
pg. 6
USE PROVIDED GLOVES WHEN HANDLING LAMP TO AVOID FINGER MARKS.
BOLA SPHERE CHANDELIER
120V & 240V ASSEMBLY & INSTALLATION INSTRUCTIONS
pg. 7
BOLA SPHERE CHANDELIER
IMPORTANT: WE RECOMMEND FIXTURE BE INSTALLED BY AN ELECTRICIAN. BOLA SPHERE CHANDELIER MUST BE SECURELY ANCHORED TO 150LBS RATED JUNCTION BOX OR MOUNTED TO CEILING STUDS.
5, 6, 8
6, 8, 10
8, 10, 12
5, 6, 8, 10
BOLA SPHERE CHANDELIER
1. DETERMINE APPROPRIATE HEIGHT ABOVE SURFACE FOR LOWEST LAMP 2. SPACE EACH LAMP SUCH THAT THEY WILL NOT TOUCH EACH OTHER 3. MOVE UPWARDS IN A SPIRAL PATTERN
6, 8, 10, 12
4, 5, 6, 8, 10
5, 6, 8, 10, 12
4, 5, 6, 8, 10, 12
4, 5, 6, 8, 10, 12 (x2)
pg. 8
NOTE: INSTALLATION SHOWN IS FOR BOLA SPHERE CHANDELIER 3. FOR BOLA SPHERE CHANDELIER 5 AND 7, FOLLOW THE SAME WIRING PROCESS USING THE HOLE PLACEMENT OUTLINED IN SUGGESTED HANGING CONFIGURATIONS.
pg. 9
BOLA SPHERE CHANDELIER
CONNECT FIXTUR WIRING TO 2 POLE CONNECTOR ON DC OUTPUT SIDE OF TRASNFORMER AS SHOWN. IMPORTANT! ONE TRANSFORMER PER LAMP.
PURPLE GREY
TO BUILDING
TO DRIVER
RED
MATCH RED TO RED AND BLACK TO BLACK USING INCLUDED WIRE CONNECTORS
IMPORTANT! FOR EU INSTALLATION
FROM LINE VOLTAGE (BUILDING) INTO TERMINAL BLOCKS : BLUE TO WHITE AND BROWN/RED TO BLACK
FROM DRIVER INTO TERMINAL BLOCKS : BLUE TO WHITE AND BROWN/RED TO BLACK
NOTE: PURPLE AND GREY CORDS ARE USED ONLY WITH 0 10 V DIMMER SWITCH AND SHOULD NEVER BE ATTACHED TO THE TERMINAL BLOCK. CONTACT PABLO IF FURTHER INSTRUCTION IS REQUIRED.
pg. 10
[email protected] [email protected]
888 MARIN STREET SAN FRANCISCO, CA
94124 PABLODESIGNS.COM
PABLODESIGNS.EU
pg. 11
Pablo
Pablo
