Hayward Spx2610x15xepe Super Pump Xe Instructions (+ PDF)

Contents hide

SPX2610X15XEPE Super Pump XE

Product Information:

The Super Pump XE is a high-performance pump designed for use in
residential and commercial swimming pools. It is available in two
different power options – 1.65 HP and 2.25 HP. The pump is equipped
with several parts including a housing gasket, shaft seal assembly,
mounting foot screws, motor cap screws, mounting foot, seal plate,
power end, diffuser gasket, pump strainer housing with gasket,
basket, strainer cover gasket, strainer cover, swivel nut &
hand knob, diffuser, drain plug with gasket, motor mounting plate,
housing cap screw, and impeller. All parts are replaceable with
genuine Hayward replacement parts.

Product Usage Instructions:

Before installing the Super Pump XE, make sure the power supply
to the pool is turned off.
Identify the parts required for installation as per the user
manual.
Install the strainer housing with gasket onto the pump body
using the mounting foot screws.
Attach the seal plate to the motor using the motor cap
screws.
Insert the impeller onto the motor shaft and secure it with the
impeller screw.
Attach the diffuser onto the seal plate using the diffuser
gasket and housing cap screw.
Insert the basket into the strainer housing.
Attach the strainer cover onto the strainer housing using the
strainer cover gasket and swivel nut & hand knob.
Connect the pump to the pool’s plumbing system using standard
PVC pipes and fittings.
Turn on the power supply to the pool and start the pump.
Regularly check the pump and its parts for any signs of wear
and tear and replace any worn-out parts with genuine Hayward
replacement parts.