Jura 68116 Stainless Steel Vacuum Milk Container Instruction Manual

68116 Stainless Steel Vacuum Milk Container

Product Information

The stainless steel vacuum milk container is a durable and
efficient container designed for storing and dispensing milk. It is
available in two sizes, with fill volumes of 0.4 liters and 0.6
liters. The container is made of high-quality stainless steel
material, ensuring its longevity and resistance to heat
sources.

Important Information

• Always store the container open when not in use to prevent
  health risks and damage.
• Avoid filling the container with ice cubes or carbonated
  liquids.
• Do not continuously refill the container with milk, as it may
  go sour over time.
• If there is leftover milk in the container after use, transfer
  it to another receptacle.
• Do not wash the stainless steel vacuum milk container and its
  individual parts in the dishwasher.
• Protect the container from direct sources of heat.

First-time Use

1. Rinse the stainless steel vacuum milk container thoroughly
   before using it for the first time.
2. If desired, use the long milk pipe to position the milk
   container further away from the machine. Alternatively, you can cut
   the pipe into three replacement pipes, each measuring 120 mm in
   length.
3. Assemble the milk pipe (1), connector (2), and black rubber
   seal (3), then connect them to the cover (4).
4. Insert the transparent rubber seal (6) into the cover (5).
5. Insert the straight side of the metal pipe (7) into the rubber
   seal (6).
6. Fill the container with milk and close the cover. The closed
   container will keep the milk cool for approximately 8 hours.
7. Connect the milk pipe (1) to your coffee machine by attaching
   the end of the milk pipe (without the connector) to the connector
   provided with your coffee machine.

Cleaning and Maintenance

• Do not use harsh or abrasive cleaning agents or hard objects
  that may damage the coating of the stainless steel vacuum milk
  container.
• For hygiene purposes, it is recommended to change the milk pipe
  approximately every 3 months. Replacement pipes can be obtained
  from specialized dealers.
• Rinse the stainless steel vacuum milk container and its
  individual parts thoroughly under running water.
• If there are stubborn milk residues, immerse the individual
  parts in a solution of 250 ml cold water and 1 capful of JURA milk
  system cleaner. Then rinse the parts thoroughly.

Bedienungsanleitung Instructions for Use Mode d’emploi Istruzioni per l’uso Gebruiksaanwijzing Manual Manual de instruções Bruksanvisning Instrukcja obslugi

1

2 34

5

6 7

0.6 l

0.4 l

2

Stainless steel vacuum milk container
J These instructions apply to stainless steel vacuum milk containers with fill volumes of 0.4 l and 0.6 l.
Important information
Proper use The stainless steel vacuum milk container is designed to keep milk cool. Use for any other purpose will be deemed improper. JURA cannot accept any responsibility for the consequences of improper use. Before using the container read these instructions for use thoroughly and completely and comply with the instructions they contain. A warranty service is not applicable for damage or defects caused by non-compliance with the instructions for use. Keep these instructions for use close to the container and pass them on to the next user.
For your safety To prevent a health risk and damage to the container: Z Always store the container open when not in use. Z Do not fill the container with ice cubes or carbonated liquids. Z Do not keep filling the container with milk. Milk that has been in the
container for a long time can go sour. Z If there is still milk in the container after use, store the milk in another
receptacle, not in this container. Z Do not wash the stainless steel vacuum milk container and individual
parts in the dishwasher. Z Protect the container from sources of heat.
6

Stainless steel vacuum milk container
First-time use en
E Rinse the stainless steel vacuum milk container thoroughly before using it for the first time.
E Using the long milk pipe allows you to position the milk container further away from the machine. You can however cut the pipe to make three replacement pipes, each 120 mm in length.
T Assemble the milk pipe (1), the connector (2) and the black rubber seal (3) and connect the parts to the cover (4).
T Insert the transparent rubber seal (6) into the cover (5). T Then insert the straight side of the metal pipe (7) into the rubber seal (6). T Fill the container with milk and close the cover. The closed container will
keep the milk cool for about 8 hours. T Connect the milk pipe (1) to your coffee machine. To do this, attach the
end of the milk pipe (without the connector) to the connector supplied with your coffee machine.
Cleaning and maintenance
E Do not use harsh or abrasive cleaning agents or hard objects for cleaning. These can damage the coating of the stainless steel vacuum milk container.
E In the interests of hygiene, we recommend changing the milk pipe on a regular basis (approx. every 3 months). Replacement pipes are available from specialised dealers.
T Rinse the stainless steel vacuum milk container and individual parts thoroughly under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in a solution of 250 ml cold water and 1 capful of JURA milk system cleaner. Then rinse the parts thoroughly.
7

Próniowy pojemnik na mleko ze stali szlachetnej www.jura.com
28

Art. 70253 ­ 201403

References

• JURA Coffee Machines: Latte Macchiato, Cappuccino, Espresso and Coffee - JURA USA