Cozylady 5m-100m Smart Led Strip Lights Instructions (+ PDF)

Bluetooth Light Strip Instructions

Test item


Entanglement can Cause neighboring resistors to collide and cause short circuit.	lt can lead to overheating If you test without unrolling the light spool for more then 3 minutes.	Please unroll the strip light like the photo above when testing to avoid overheating.

Stick the LED strip on right places
Use alcohol pad to clean up
Uncover the adhesive backing
Tear and attach

Get a helper to hold and unroll the light Strand in case twisting of the light strip causes damage to the light set.
Fixate the light end, controller, and adapter cord with clips provided
Using the clips provided is the best way to keep the light strip up.
Do not fold the light strip on turning Just bend a little and leave it loose in arc clrhaarnn
Stick the LED strip and press the panel with a little force

Do not press hard on the light beads
Instruction for Bluetooth Connection
Step 1. Scan the QR code on the controller and down Happylihting App.
http://download.appglobalmarket.com/happylightingdownload.html
Step 2. Turn on the Bluetooth on your phone.
Step 3. Open the App and click “My device’ under Group Manage(upper left corner) to connect or disconnect with devices.
Safety Information
1. Keep away from open flame.
2. Avoid overheating. Test the light set when the light Strip is unrolled.
3. Avoid rough surface. Make sure the surface is clean and dry before installation.
4. Avoid uncovering too much backing during installation and stick it to the installation surface slowly.
5. Avoid pressing hard the lamp bead on the light strip.
6. Backing adhesive does not have good adhesion to all materials, so please use the securing clips we provide.
7. Avoid direct contact between light beads, which might cause failure of light beads caused by short-circuit.
8. Non-waterproof version is for indoor use only. Please avoid direct contact to liquid or vapor.
9. Please don’t cut the light strips randomly, it is not recommended to cut it without instructions, so as to avoid operating errors which can lead to product defect.
10. Please avoid using the light set in stormy weather.

FCC Statement
This equipment has been tested and found to comply with the lim for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, If not installed and used in accordance with the tnstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for he

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Exemption Clause
Please note our company Is not liable for any faulty or dama: caused by use of any unoriginal accessories from another company, brand, or components (including power adapter, receiver/controller, connectors, and any other parts not included In the product’s original package).