Newell D-tap 16.8 V 5 A Charger For V-mount Batteries User Manual

D-Tap 16.8 V 5 A Charger for V-Mount Batteries

Newell D-Tap 16.8 V 5 A Charger for V-Mount Batteries

The Newell D-Tap 16.8 V 5 A Charger is a power supply designed
for indoor use. It is compatible with devices that require a
specified voltage and plug. The charger comes with a D-Tap cable
length of 95cm and a power cable length of 90cm. The dimensions of
the charger are 59 x 140 x 36mm.

Safety Instructions

1. Use the power supply with devices that require the specified
   voltage and plug. The current of the power supply must not be less
   than that indicated on the device.
2. Always connect the power supply to the mains first, and then
   connect it with the powered device.
3. Do not install near heat sources such as stoves, heaters, and
   other heat-generating devices.
4. Do not expose to water or other sources of moisture.
5. Do not expose to high temperatures.
6. Do not self-repair, disassemble or modify.
7. The power supply unit may heat up during operation which is
   normal. Do not cover or otherwise restrict heat dissipation.
8. Keep out of reach of children.
9. Do not leave unattended while charging.
10. Disconnect the device from the mains before cleaning. Do not
    use liquid cleaners or aerosol cleaners.
11. If the device is not used for an extended period of time,
    disconnect the plug from the power outlet. This is to ensure
    protection against lightning and power line surges.
12. The power cord should be routed so that it is not likely to be
    stepped on or pinched by objects placed near or on it.
13. Do not use the power adapter if it is damaged.
14. Used equipment should be taken to a suitable collection point
    and not mixed with other household waste.

Usage

1. Connect the power cord to the power adapter.
2. Connect the power supply unit to a suitable power source.
3. Connect the power adapter to your compatible device.
4. After use, disconnect the device and power supply from the
   power source.

Specification

• Power supply output current: 16.8 V / 5 A
• D-Tap cable length: 95cm
• Power cable length: 90cm
• Dimensions: 59 x 140 x 36mm

Set Contents

• Newell D-Tap 16.8 V 5 A charger for V-mount batteries
• AC power cable (1 piece)

Waste Management

The crossed-out trashcan symbol means that waste electrical and
electronic, batteries, and packagings must not be placed with other
household waste. They must be handed over to a separate waste
collection system.

Warranty

Newell products are covered by a 40-month manufacturer’s
warranty.

Newell D-Tap 16.8 V 5 A charger for V-mount batteries
OPERATING MANUAL

1. SAFETY INSTRUCTIONS
1. Use the power supply as intended, with devices that require the specified voltage and plug. The current of the power supply must not be less than that indicated on the device.
2. Always connect the power supply to the mains first, and then connect it with the powered device.
3. Do not install near heat sources such as stoves, heaters, and other heat-generating devices.
4. Do not expose to water or other sources of moisture. 5. Do not expose to high temperatures. 6. Do not self-repair, disassemble or modify. 7. The power supply is designed for indoor use. 8. The power supply unit may heat up during operation which
is normal. Do not cover or otherwise restrict heat dissipation. 9. Keep out of reach of children. 10. Do not leave unattended while charging. 11. Disconnect the device from the mains before cleaning.
Do not use liquid cleaners or aerosol cleaners. 12. If the device is not used for an extended period of time,
disconnect the plug from the power outlet. This is to ensure protection against lightning and power line surges. 13. The power cord should be routed so that it is not likely to be stepped on or pinched by objects placed near or on it. 14. Do not use the power adapter if it is damaged. 15. Used equipment should be taken to a suitable collection point and not mixed with other household waste.

2. USAGE
1. Connect the power cord to the power adapter. 2. Connect the power supply unit to a suitable power source. 3. Connect the power adapter to your compatible device. 4. After use, disconnect the device and power supply from
the power supply.

3. SPECIFICATION
Power supply Output current D-Tap cable length Power cable length Dimensions

100-240 V; 50/60 Hz; 2 A (max) 16.8 V / 5 A 95 cm 90 cm 59 x 140 x 36 mm

4. SET CONTENTS

Newell D-Tap 16.8 V 5 A charger for V-mount batteries AC power cable

1 pcs 1 pcs

* The manufacturer reserves the right to change the information contained in this manual without prior notice.

5. WASTE MANAGEMENT
The crossed-out trashcan symbol means that waste electrical and electronic, batteries and packagings must not be placed with other household waste. They must be handed over to a separate waste collection system.

6. WARRANTY
Newell products are covered by a 40-month manufacturer’s warranty.

Made in China, In China hergestellt, Hecho en China, Fabbricato in Cina, Fabriqué en Chine, Vyrobeno v Cín, Wyprodukowano w Chinach, C

Ladowarka Newell D-Tap 16,8 V 5 A do akumulatorów V-mount
INSTRUKCJA OBSLUGI

1. WSKAZÓWKI BEZPIECZESTWA
1. Zasilacza naley uywa zgodnie z przeznaczeniem, z urzdzeniami wymagajcymi okrelonego napicia i wtyku. Prd zasilacza nie moe by mniejszy ni podany
2. na urzdzeniu. Zawsze naley najpierw podlczy do sieci zasilacz,
3. a nastpnie podlczy go z zasilanym urzdzeniem. Nie naley instalowa urzdzenia w pobliu ródel ciepla, takich jak piece, grzejniki, a take inne urzdzenia
4. wytwarzajce cieplo. Nie naley wystawia na dzialanie wody lub innych ródel wilgoci.
5. Nie wystawia na dzialanie wysokich temperatur. 6. Nie naprawia we wlasnym zakresie, nie rozbiera
oraz nie modyfikowa. 7. Zasilacz jest przeznaczony do uytku wewntrznego. 8. Zasilacz moe nagrzewa si w czasie pracy co jest
normalnym zjawiskiem. Nie naley przykrywa ani w inny sposób ogranicza odprowadzania ciepla. 9. Trzyma poza zasigiem dzieci. 10. Nie pozostawia bez nadzoru podczas ladowania. 11. Przed przystpieniem do czyszczenia odlczy urzdzenie od sieci elektrycznej. Nie naley uywa rodków czyszczcych w plynie lub w aerozolu. 12. Jeli urzdzenie nie jest uytkowane przez dluszy czas, naley odlczy wtyczk od gniazda energetycznego. Sluy to zapewnieniu ochrony przed wyladowaniami atmosferycznymi oraz skokami napicia w sieci energetycznej. 13. Kabel zasilajcy powinien by poprowadzony w taki sposób, aby wyeliminowa moliwo nadepnicia na niego lub przygniecenia przez przedmioty stawiane obok lub na nim. 14. Nie korzysta z zasilacza w przypadku, gdy jest uszkodzony. 15. Zuyty sprzt naley dostarczy do odpowiedniego punktu odbioru odpadów, nie moe.

2. UYTKOWANIE
1. Podlcz przewód zasilajcy do zasilacza. 2. Podlcz zasilacz do odpowiedniego ródla zasilania. 3. Podlcz zasilacz do kompatybilnego urzdzenia. 4. Po zakoczeniu uytkowania odlcz urzdzenie i zasilacz
od ródla zasilania.

3. SPECYFIKACJA

Zasilanie

100-240 V; 50/60 Hz; 2 A (maks.)

Prd wyjciowy

16.8 V / 5 A

Dlugo kabla D-Tap

95 cm

Dlugo kabla zasilajcego 90 cm

Wymiary

59 x 140 x 36 mm

4. ZAWARTO ZESTAWU

Ladowarka Newell D-Tap 16,8 V 5 A do akumulatorów V-mount Kabel zasilajcy AC

1 szt. 1 szt.

* Producent zastrzega sobie prawo zmiany informacji zawartych w niniejszej instrukcji bez wczeniejszego powiadomienia.

5. UTYLIZACJA
Symbol przekrelonego kosza oznacza, e zuytego sprztu elektrycznego i elektronicznego, baterii i akumulatorów oraz opakowa nie wolno umieszcza z innymi odpadami domowymi. Musz one by przekazane do oddzielnego systemu zbiórki odpadów.

6. GWARANCJA
Produkty Newell objte s 40-miesiczn gwarancj producenta.

Producent/Importer: Fdirect sp. z o.o., ul. Rbieska 18, 95-227 Lód, Polska
Made in China, In China hergestellt, Hecho en China, Fabbricato in Cina, Fabriqué en Chine, Vyrobeno v Cín, Wyprodukowano w Chinach, C