Hama 00200760 Usb Hard Disk Housing Instruction Manual

Hama 00200760 Usb Hard Disk Housing Instruction Manual

hama-LOGOhama 00200760 USB Hard Disk Housing

hama 00200760 USB Hard Disk Housing-PROSDUCTPackage Contents

  1. USB hard disk housing
  2. USB Cable
  3. USB Adapter
  4. Screw
  5. These operating instructions

Safety Notes

  • Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
  • Do not open the device or continue to operate it if it becomes damaged.
  • Do not operate the product outside the power limits given in the specifications.
  • Do not modify the product in any way. Doing so voids the warranty.
  • Keep this product, as all electrical products, out of the reach of children!Use the product for its intended purpose only.
  • Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
  • The product is intended for indoor use only.
  • Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
  • Do not use the product in areas where the use of electronic devices is not permitted.
  • Do not drop the product and do not expose it to any major shocks.
  • Dispose of packaging material immediately according to locally applicable regulations.

Warning

  • Ensure that data transfer is complete before removing a hard drive from the hard drive enclosure.
  • Always use the Eject function of your operating system (computer, smartphone, tablet/Windows, Mac OS, Android) before removing a hard drive from the hard drive enclosure.
  • If you do not do this, data may be lost.
  • Under no circumstance does Hama GmbH & Co KG accept liability for loss of data stored on data storage media.

Startup and Operation

  • Carefully undo the screw of the hard drive enclosure using a suitable screwdriver.
  • Now slide the lid of the hard drive enclosure to the rear.
  • Carefully insert the 2.5-inch hard drive into the enclosure.
  • Close the enclosure again by tightening the screw.
  • Switch on your computer and boot the system.
  • Connect the product to a free USB port on your computer.
  • You do not have to install drivers; the computer will automatically recognize the product.
  • If necessary, follow the instructions for your operating system.
  • The product can now be used.
Note
  • If the hard drive is already partitioned and data is on the hard drive, you can access that data.
  • New or unpartitioned hard drives must be partitioned and formatted after initialization. Refer to the operating system manual for your computer/notebook for the necessary steps to do so.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or failure to observe the operating instructions and/or safety notes.

Technical Data

 
Operating voltage / current consumption5 V  max. 900 mA
CompatibilityUSB-C port USB-A port
System requirementsWindows 11 / 10 / 8 / 7 Mac OS 10.8 ≥
USB specificationUSB 3.2 Gen1
Hard drive heightmax. 9.50 mm

Note

If there is interference or the product no longer responds, unplug the product, wait a few seconds and then plug it in again.

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals