RL 3542 Lohan Medium Table Lamp
Product Information:
Product Name: Lohan Medium Table Lamp
Item Number: RL 3542
Package Contents: Lamp base (A), Lampshade (B), Harp (C),
Adjustment knobs (D), Saddle (E), Protective cover (F)
Additional Requirements: Light bulb (not included), Scissors
(not included)
Product Safety Notice: This light fixture should be installed in
accordance with all applicable, local installation codes, and by a
person familiar with the construction and operation of it, as well
as the hazards involved. Inspect item and contents carefully. If
any damage or defect is found, do not install. Retain all packaging
material until installation is complete and approved.
Product Usage Instructions:
- Carefully remove all parts from the box and place them on a
clean, soft surface. - Install the harp (C) onto the saddle (E). Adjust the harp (C)
to the desired height and then tighten the adjustment knobs
(D). - Remove the finial (A) from the harp (C).
- Remove the shade (B) from its packaging and install it onto the
harp (C) using the finial (A). If the shade has additional
packaging, carefully cut it off from the interior of the shade to
avoid damages. - Install a light bulb into the socket.
- Remove the protective cover (F) from the plug.
- Plug the lamp into an electrical outlet and test the
fixture.
Care Instructions:
Clean the lamp only with a soft dry cloth or feather duster. Do
not use abrasive or chemical agents.
Note: Please ensure you follow the safety
notice and consult a professional if you are unsure about the
installation process.
ASSEMBLY INSTRUCTIONS
A B (Packaged separately)
C Bulb not included D E
F
Lohan Medium Table Lamp Item # RL 3542
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Install harp (C) onto saddle (E), adjust harp (C) to desired height, then
tighten adjustment knobs (D). 3. Remove finial (A) from harp (C). 4. Remove shade (B) from packaging and install to harp (C) using
finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 5. Install light bulb into the socket. 6. Remove protective cover (F) from the plug. 7. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
