RL 3543 Lohan Large Table Lamp
Product Information
The Lohan Large Table Lamp, item # RL 3543, is a light fixture
designed for tabletop use. It comes with all the necessary parts
for assembly, including a harp, saddle, finial, shade, and
protective cover. The lamp requires a light bulb, which is not
included in the package. The lamp is intended to be plugged into an
electrical outlet for operation.
It is important to note that this light fixture should be
installed in accordance with all applicable local installation
codes. The installation should be done by a person familiar with
the construction and operation of the lamp and the potential
hazards involved. Before installation, inspect the item and its
contents carefully. If any damage or defect is found, do not
proceed with the installation. Retain all packaging material until
installation is complete and approved.
Product Usage Instructions
- Carefully remove all parts from the box and place them on a
clean, soft surface. - Install the harp (C) onto the saddle (E) and adjust the harp to
the desired height. Then tighten the adjustment knobs (D). - Remove the finial (A) from the harp (C).
- Remove the shade (B) from its packaging and install it onto the
harp (C) using the finial (A). If the shade has additional
packaging, carefully cut it off from the interior of the shade to
avoid damages. - Install a light bulb into the socket.
- Remove the protective cover (F) from the plug.
- Plug the lamp into an electrical outlet.
- Test the fixture to ensure it is working properly.
Care Instructions: To clean the lamp, use only
a soft dry cloth or feather duster. Do not use abrasive or chemical
agents.
Important: This product is listed and approved
for use in the United States.
ASSEMBLY INSTRUCTIONS
A B (Packaged separately)
C Bulb not included D E
F
Lohan Large Table Lamp Item # RL 3543
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Install harp (C) onto saddle (E), adjust harp (C) to desired height, then
tighten adjustment knobs (D). 3. Remove finial (A) from harp (C). 4. Remove shade (B) from packaging and install to harp (C) using
finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 5. Install light bulb into the socket. 6. Remove protective cover (F) from the plug. 7. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
