Shark S6002uk Steam And Scrub Automatic Steam Mop User Guide

S6002UK Steam and Scrub Automatic Steam Mop

Product Information

This product is a steam mop designed for cleaning various sealed
surfaces. It has different settings for different types of surfaces
and cleaning needs. The mop assembly is easy, and additional
accessories are available for purchase to enhance the usage
experience. The product comes with a one-year limited warranty.

Product Usage Instructions

1. Insert the handle into the mop body until it clicks into
   place.
2. Place pads on the floor with the rings facing up. Align the mop
   head with the indents on the rotating discs directly above the
   rings, then lower the head onto the pads, pressing until
   secure.
3. For different cleaning needs, select the appropriate setting on
   the steam mop:
   • Normal: Suitable for laminate, hardwood, and
     vinyl surfaces. Recommended for light cleaning and dusting,
     loosening and lifting light dirt, basic everyday cleaning, and
     cleaning large areas.
   • Deep: Ideal for marble, tile, and stone
     surfaces. Recommended for reaching hard-to-clean surfaces, tough
     cleaning and removing stuck-on messes and stains, deep cleaning
     heavy traffic areas, cutting through heavy dirt and grime, and
     sanitizing floors.
4. After use and storage:
   1. Press the mode button until the indicator lights below start to
      blink, indicating Standby mode. Unplug the cord from the outlet and
      place the steam mop in the upright position to cool down.
   2. When the pads have cooled completely, remove them by pulling
      them off the discs.
   3. Empty the water tank before storing. Open the tank lid and pour
      the water out into a sink or bathtub. Close the lid after all the
      water has drained out.
   4. Wait until the steam mop has cooled and the steam has been
      released before storing it in a dry, protected area until the next
      use.

One (1) Year Limited Warranty

The One (1) Year Limited Warranty applies to purchases made from
authorized retailers of SharkNinja Operating LLC. The warranty
covers defects in material and workmanship for one year from the
date of purchase, under normal household conditions and
maintenance. The warranty covers repair or replacement of defective
parts. Normal wear and tear of wearable parts and any tampering or
commercial use are not covered by this warranty.

QUICK START GUIDE
Please be sure to read and save the warnings on other side prior to using your unit.
STEAM MOP ASSEMBLY 1 Insert the handle into the mop body
until it clicks into place. (fig. 1) 2 Place pads on the floor with the rings
facing up. Align the mop head so the indents on the rotating discs are directly above the rings, then lower the head onto the pads, pressing until secure. (fig. 2)
fig. 2
fig. 1
ORDERING ADDITIONAL ACCESSORIES
ACCESSORY
Filling Flask Makes it simple and convenient to fill the water tank.
Dirt Grip® Pads Easy-to-attach, reusable pads feature a superabsorbent microfiber for locking in moisture and dirt, and scrubbing material for breaking up tough, stuck-on stains. Dusting Pads Easy-to-attach, reusable pads bring a polished finish to hardwood floors and can reach into tight spaces. You can purchase replacement Dirt Grip pads, dusting pads, and other accessories by visiting sharkclean.com.

INTELLIGENT STEAM CONTROL®

SETTING LIGHT

IDEAL FOR THESE SEALED SURFACES

RECOMMENDED USAGE

Laminate Hardwood Vinyl

Cleaning delicate surfaces Light cleaning and dusting Loosening and lifting light dirt

NORMAL

Marble Tile Stone

Basic, everyday cleaning Cleaning large areas Cleaning moderate and heavy traffic areas

DEEP

Marble Tile Stone

Reaching hard-to-clean surfaces
Tough cleaning and removing stuck-on messes and stains
Deep cleaning heavy traffic areas
Cutting through heavy dirt and grime Sanitizing* floors

AFTER USE AND STORAGE
1 Press the mode button until the indicator lights below start to blink, indicating that you are in Standby mode. Unplug the cord from the outlet and place the steam mop into the upright position. Let it cool. (fig. 3)
2 When the pads have cooled completely, remove them by pulling them off the discs. (fig. 4)
3 After the unit has cooled and the steam has been released, empty the water tank before storing. Open the tank lid and pour the water out into a sink or bathtub. After all the water has drained out, close the lid.
4 To store the steam mop, wait until after it has cooled and the steam has been released. Store steam mop in a dry, protected area until next use.

fig. 3

fig. 4

ONE (1) YEAR LIMITED WARRANTY
The One (1) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of one (1) year from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:
What is covered by this warranty? 1. The original unit and/or non-wearable parts deemed defective,
in SharkNinja’s sole discretion, will be repaired or replaced up to one (1) year from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of equal or greater value.
What is not covered by this warranty? 1. Normal wear and tear of wearable parts (such as Shark
Cleaner, Pad, etc.), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are available for purchase at sharkaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes.
3. Damage caused by misuse (e.g., vacuuming up water or other liquids), abuse, negligent handling, failure to perform required maintenance, or damage due to mishandling in transit.
4. Consequential and incidental damages.

5. Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the repair is performed by a repair person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.
How to get service If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit sharkclean.com/support for product care and maintenance selfhelp. Our Customer Service Specialists are also available at 1-800-798-7398 to assist with product support and warranty service options, including the possibility of upgrading to our VIP warranty service options for select product categories. So we may better assist you, please register your product online at registeryourshark.com and have the product on hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of $25.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.
How to initiate a warranty claim You must call 1-800-798-7398 to initiate a warranty claim. You will need the receipt as proof of purchase. We also ask that you register your product online at registeryourshark.com and have the product on hand when you call, so we may better assist you. A Customer Service Specialist will provide you with return and packing instruction information.
How state law applies This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

IMPORTANT SAFETY INSTRUCTIONS
HOUSEHOLD USE ONLY · READ ALL INSTRUCTIONS BEFORE USE

This steam mop has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature. It is not recommended to use an extension cord with this product.
WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

GENERAL WARNINGS
WHEN USING YOUR SHARK® STEAM & SCRUB, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
1. DO NOT leave the steam mop unattended when plugged in. ALWAYS unplug the power cord from the electrical outlet when not in use and before servicing.
2. DO NOT use with damaged cord or plug. If steam mop is not working as it should or has been dropped, damaged, left outdoors, or dropped into water, return it to SharkNinja Operating LLC for examination and repair. Incorrect reassembly or repair can cause a risk of electrical shock or injury when the steam mop is used.
3. To protect against a risk of electric shock, DO NOT immerse the steam mop in water or any other liquids.
4. DO NOT handle the plug or steam mop with wet hands or operate it without wearing shoes.
5. DO NOT pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. DO NOT run steam mop over cord. Keep cord away from heated surfaces.
6. DO NOT unplug by pulling on power cord. To unplug, grasp the plug not the power cord. DO NOT use extension cords or outlets with inadequate current-carrying capacity.
7. Unplug before servicing.
8. ALWAYS make sure the steam mop is UNPLUGGED when not in use.
9. NEVER fill the steam mop or attach the mop head when the steam mop is plugged into an electrical outlet. Unplug from the electrical outlet and allow to cool before you fill the mop, or attach or remove the head.
10. When cleaning the exterior of the steam mop, unplug the power cord from the electrical outlet and clean the steam mop with a dry or damp cloth. DO NOT pour water or use alcohol, benzene, or paint thinner on the steam mop.
11. To avoid circuit overload, DO NOT operate another appliance on the same socket (circuit) as the steam mop.
12. To avoid scalding injuries, ALWAYS unplug and allow the steam mop to cool before removing or changing mop heads, accessories, or Dirt Grip® pads.
USE WARNINGS
13. When in use, NEVER turn the steam mop over on its side or direct steam toward people, pets or plants.
14. Use the system only for its intended use.
15. DO NOT use for space-heating purposes.
16. DO NOT use outdoors.
17. DO NOT allow the steam mop to be used by children. Close
attention is necessary when used near children, pets, or plants.
18. Use only as described in this owner’s guide. 19. Use only manufacturer’s recommended accessories.

20. DO NOT put any objects into the steam nozzle openings. Discontinue use if the steam nozzle is blocked.
21. DO NOT put hands or feet under the steam mop. It gets very hot.
22. Use ONLY on flat, horizontal surfaces. DO NOT use on walls, counters, or windows.
23. DO NOT use on leather, wax-polished furniture, synthetic fabrics, velvet, or other delicate, steamsensitive materials.
24. DO NOT add cleaning solutions, scented perfumes, oils, or any other chemicals to the water used in the steam mop as this may damage it or make it unsafe for use. If you live in a hard-water area, we recommend using distilled water in your steam mop.
25. NEVER leave any Dirt Grip® pads in one spot while using or storing for an extended period, as this may damage your surfaces.
26. You can release the Dirt Grip® pads after you have unplugged the steam mop and allowed it to cool.
27. Extreme caution should be exercised when using the steam mop to clean stairs.
28. NEVER use steam mop without the Dirt Grip® pads attached.
29. Keep your work area well lit. 30. Store steam mop indoors in a cool, dry place. 31. Keep hair, loose clothing, fingers, and all parts of body
away from openings and moving parts. 32. DO NOT carry the steam mop while in use. 33. The steam emitted from the steam mop is very hot and
may cause scalding. Please use caution when using the steam mop. 34. DO NOT use on unsealed wood or unglazed ceramic floors. On surfaces that have been treated with wax and on some unwaxed floors, the sheen may be removed by the heat and steam action. 35. ALWAYS test an isolated area of the surface to be cleaned before proceeding. We also recommend that you check the use and care instructions from the floor manufacturer. 36. DO NOT scrub any one area for an extended period. 37. DO NOT use the steam mop without attaching the Dirt Grip® pads and adding water to the water tank. When you use the steam mop for the first time, it might take longer than the normal 30 seconds to start steaming. 38. DO NOT use on unsealed wood or unglazed ceramic floors. On surfaces that have been treated with wax and on some unwaxed floors, the sheen may be removed by the heat and steam action. Test an isolated area of the surface to be cleaned before proceeding. Check the use and care instructions from the floor manufacturer. 39. To prolong the life of your steam mop, we recommend using distilled water. Add ONLY water to the tank. Chemicals or cleaning solutions (including vinegar) may damage the steam mop and could be unsafe for you and your family.

READ AND SAVE THESE INSTRUCTIONS
VISIT sharkclean.com/support OR
SCAN HERE
FOR FULL INSTRUCTIONS & REPLACEMENT PARTS

© 2022 SharkNinja Operating LLC. DIRT GRIP, INTELLIGENT STEAM CONTROL, and SHARK are registered trademarks of SharkNinja Operating LLC.
S7001Series_IB_Sheet_MP_Mv4

References

• Sign In
• Find Sharkclean Parts & Accessories | Sharkclean
• Vacuum Cleaners, Steam Mops, Hair Care & Air Purifiers | Shark Home Cleaning