G1 Small-Medium Chew Kit
Instruction Manual
 |  |
| To install the Chew Kit on the door place the grate over the windows and align the screw holes. Install the ten screws to secure the grate in place. | Repeat for the bottom of the door. |
 |  |
| To install the Chew Kit on the windows use a 3/16″ hex key to remove 3 cap screws. | Using a 7/16″ wrench or ratchet, remove the bolts and washers, fastening the upper and lower halves of the kennel. |
 |  |
| Uninstall the window pane screws to install the Chew Kit from the inside of the kennel. | Line up the existing holes with the original kennel hardware. Repeat steps 5 and 6 for all five window panes. |
 | |
| Reinstall the upper and lower halves of the kennel. Finally, reinstall three cap screws and washers in the door frame. | |
1-844-GUNNERK
[email protected]
