Optonica 320led-m Waterproof Led Cob Strip User Manual

320LED-m Waterproof LED COB Strip

Product Information: Waterproof COB Strip

The Waterproof COB Strip is a luminaire designed for various
lighting applications. It is waterproof and suitable for both
indoor and outdoor use. The strip is equipped with high-quality LED
chips, providing bright and efficient lighting.

Check Points:

1. Before installation, carefully inspect the luminaire to ensure
   it is in good condition.
2. Always turn off the power before wiring and installation to
   prevent electrical hazards.

Product Usage Instructions

How to Choose a Power Supply:

When selecting a power supply for the Waterproof COB Strip,
consider the following tips:

• Choose a power supply with the appropriate voltage and current
  rating to match the requirements of the LED strip.
• Ensure the power supply is compatible with the electrical
  standards of your country.
• Consult the manufacturer’s guidelines or seek professional
  advice if you are unsure about the power supply selection.

Installation Steps:

Step 1: Prepare Accessories

Gather all the necessary accessories before proceeding with the
installation.

Step 2: Cutting the Strip

If you need to cut the strip to your desired length, follow
these steps:

1. Locate the cutting line at the back of the strip.
2. Carefully cut along the cutting line using appropriate
   tools.
3. After cutting, seal the newly exposed ends of the strip with
   end-caps and glue to maintain its waterproof properties.

Step 3: Fixing the Strip

Use the provided fix clips and screws to securely install the
strip:

1. Position the fixing clip at the desired area.
2. Secure the fixing clip in place using the provided screw.
3. Insert the strip into the fixed clip, ensuring it is properly
   aligned and secured.

Step 4: Power Connection

Connect the LED strip to the power supply using appropriate
wiring methods:

• Follow the manufacturer’s instructions for connecting the strip
  to the power supply.
• Ensure proper polarity alignment to avoid damage to the
  strip.
• Double-check all connections before turning on the power.

If you encounter any difficulties during installation or have
further questions, please contact the importer Prima Group 2004
LTD, Bulgaria, at the following address and phone number:

Importer: Prima Group 2004 LTD
Address: 1784 Sofia, Mladost 1, bl. 144, Ground Floor
Phone: +359 2 988 45 72

USER MANUAL
WATERPROOF COB STRIP
CHECK POINTS:
1. Please check the luminaire carefully before the installation. 2. Ensure the power is off before wiring and installation.
HOW TO CHOOSE A POWER SUPPLY: TIPS
1. Please be kindly informed that the total wattage of LED strip lights should not exceed the max wattage of the adapter you chose. 2. All the adapters mentioned in this User Guide have only one DC output terminal. Thus they can only be used for one single strip light or a strip connected in series. 3. To guaranty the lighting uniformity of both the front and the end of the strip light, please do not connect the led strip light more than 5m. 4. If you want to use several strip lights together, please connect them in parallel and choose another adapter with more than one output terminal.
HOW TO INSTALL STEP 1
Please prepare all the required accessories before connecting and wiring.
STEP 2
If you need to cut the strip, please cut it along the cutting line at the back of the strip.The newly cut ends should to be sealed with end-caps and glue.

STEP 3
Use fix clip and scew to fix strip. Fix the fixing clip at the appropriate area by the screw, then put the strip into the clip.
STEP 4
Connect the LED strip to the power.
HOW TO CONNECT LED STRIP LIGHT IN PARALLEL
1. Please prepare two or more LED strips, and make sure the total wattage of LED strips should not exceed the max wattage of the adaptor you chose. 2. Please prepare another adapter with more than one output terminal. 3. Please ensure that all the LED strips you want to be connected in parallel should be equipped with a DC port. 4. If a LED strip without any DC port, please equip it with the DC cable . Please also make sure the positive and negative should be connected correctly. 5. When all the strips are equipped with a DC port, connect them directly into the adapter for more than one terminal.
IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor; Phone: +359 2 988 45 72;